Microstructure and thermal conductivity of Cu/diamond composites with Ti-coated diamond particles produced by gas pressure infiltration
Source abstract
Abstract
As an attractive thermal management material, diamond particles reinforced Cu matrix (Cu/diamond) composites generally exhibit thermal conductivities lower than expected. To exploit the potential of heat conduction, a combination of Ti coating on diamond particles and gas pressure infiltration was used to prepare Cu/diamond(Ti) composites. A high thermal conductivity of 716 W/mK and a low coefficient of thermal expansion of 5.8 ppm/K at 323 K were obtained in the composites. Auger electron spectroscopy (AES) characterization shows that a TiC layer was formed between Cu matrix and diamond reinforcement, which is responsible for the enhancement of thermal conductivity. The results suggest that Ti coating can significantly promote interface bonding between Cu and diamond and gas pressure infiltration is an effective method to produce Cu/diamond composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Optimizing thermal conductivity in gas-pressure infiltrated aluminum/diamond composites by precise processing control10.1016/j.compositesa.2012.12.010 ↗
2. Diamond/aluminum composites processed by vacuum hot pressing: microstructure characteristics and thermal properties10.1016/j.diamond.2012.10.008 ↗
3. Thermal properties of diamond/copper composite material10.1016/S0026-2714(03)00215-4 ↗
4. Thermal control of electronics: perspectives and prospects
5. Fabrication and infiltration kinetics analysis of Ti-coated diamond/copper composites with near-net-shape by pressureless infiltration10.1016/j.mseb.2012.08.009 ↗
6. Effect of molybdenum carbide intermediate layers on thermal properties of copper-diamond composites10.1016/j.jallcom.2013.04.121 ↗
7. Chromium interlayers as a tool for enhancing diamond adhesion on copper10.1016/S0925-9635(00)00266-1 ↗
8. Interface design in copper-diamond composite by using PVD and CVD coated diamonds
9. High thermal conductivity composites consisting of diamond filler with tungsten coating and copper (silver) matrix10.1007/s10853-010-4938-x ↗
10. Effect of coating on the microstructure and thermal conductivities of diamond–Cu composites prepared by powder metallurgy10.1016/j.compscitech.2011.06.012 ↗
11. Improved thermal performance of diamond-copper composites with boron carbide coating10.1007/s11665-013-0780-z ↗
12. On the thermal conductivity of Cu–Zr/diamond composites10.1016/j.matdes.2012.09.006 ↗
13. The influence of minor titanium addition on thermal properties of diamond/copper composites via in situ reactive sintering10.1016/j.mssp.2014.09.050 ↗
14. Selective interfacial bonding and thermal conductivity of diamond/Cu-alloy composites prepared by HPHT technique10.1007/s12613-012-0565-7 ↗
15. On the influence of active element content on the thermal conductivity and thermal expansion of Cu–X (X=Cr, B) diamond composites10.1016/j.scriptamat.2007.08.007 ↗
16. Enhanced thermal conductivity in copper matrix composites reinforced with titanium-coated diamond particles10.1016/j.scriptamat.2011.09.028 ↗
17. Thermal conductivity of Cu–Zr/diamond composites produced by high temperature–high pressure method10.1016/j.compositesb.2014.08.023 ↗
18. Thermal conductivity of Cu/diamond composites prepared by a new pretreatment of diamond powder10.1016/j.compositesb.2013.04.017 ↗
19. Effect of a new pretreatment on the microstructure and thermal conductivity of Cu/diamond composites10.1016/j.jallcom.2013.06.027 ↗
20. Thermal conductivity of SPS consolidated Cu/diamond composites with Cr-coated diamond particles10.1016/j.jallcom.2009.10.040 ↗
21. Consolidation and thermal conductivity of diamond particle dispersed copper matrix composites produced by spark plasma sintering (SPS)
22. Synthesis and characterization of the diamond/copper composites produced by the pulse plasma sintering (PPS) method10.1016/j.diamond.2012.05.008 ↗
23. Thermal conductivity and thermal expansion coefficient of diamond/5wt%Si–Cu composite by vacuum hot pressing10.1016/j.fusengdes.2010.08.043 ↗
24. Interface formation in infiltrated Al(Si)/diamond composites10.1016/j.diamond.2005.09.036 ↗
25. Microstructure and thermal expansion of Ti coated diamond/Al composites10.1016/S1003-6326(08)60423-9 ↗
26. The measurement of thermal properties of diamond10.1016/S0925-9635(96)00772-8 ↗
27. Electrolysis of Ti2CO solid solution prepared by TiC and TiO210.1016/j.jallcom.2006.08.016 ↗
28. Effect of TiC intermediate layers on the thermal conductivity of copper/diamond composites10.4028/www.scientific.net/AMM.275-277.1610 ↗
29. Effective thermal conductivity of composites with interfacial thermal barrier resistance10.1177/002199838702100602 ↗
30. Effect of carbide formers on microstructure and thermal conductivity of diamond-Cu composites for heat sink materials10.1016/S1003-6326(08)60422-7 ↗
31. Thermal boundary resistance10.1103/RevModPhys.61.605 ↗
32. Cengel · 1998
33. Miniature loop heat pipes for electronics cooling10.1016/S1359-4311(03)00046-2 ↗