Fabrication of high-purity alumina particles by spray drying and surface modification with SDS for methylene blue removal

In the present paper, we facilely fabricated novel high-purity alumina particles with uniform morphology and size distribution by spray drying method. Despite the synthesized alumina's excellent physical characteristics, its interaction with dyes remains low. Sodium dodecyl sulfate (SDS), an anionic surfactant , was chosen to modify the alumina surface for enhanced methylene blue (MB) removal performance. The SDS-modified alumina (SA) adsorbent properties were discovered by utilizing fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), zeta potential , scanning electron microscope (SEM), and nitrogen adsorption/desorption isotherms. The favorable conditions for MB removal onto SA including working solution pH, SDS concentration, material dosage, adsorbate concentration, strength of ionic, and temperature were set at 60 min. The MB removal efficiency on SA reached approximately 99 % with a corresponding reaction rate of 0.05 g/(mg min). In addition, the MB adsorption isotherm was illustrated effectively using a two-step sorption model, with a calculated q max value of 60.99 mg/g. The novel adsorbent exhibited strong adsorption affinity for both MB, Janus Green B (JGB), and Victoria Blue B (VBB). The removal mechanism of MB on SA was thoroughly conferred and supported by FT-IR analysis and zeta potential. Furthermore, the removal efficiency of SA only decreased nearly 15 % after 5 cycles, indicating that the adsorbent exhibited respectable regeneration performance. These results demonstrated that SA is a promising material for the scavenge of wastewaters containing various cationic dyes.