Workability Characteristics of Underwater Anti-washout Self-compacting Concrete and its Mix Design Method Based on Rheological Threshold Theory
Source abstract
Abstract
Existing mix design methods for underwater anti-washout self-compacting concrete lack reliability due to unclear underwater flow behaviors. This study investigates the workability evolution of this concrete in shallow-water environments. The effects of water-to-binder ratio, superplasticizer, and underwater protective agent dosage on flowability and segregation were examined through systematic experiments. Results indicate that underwater slump flow is significantly lower and flow time markedly longer than in air, while increasing the protective agent dosage improves anti-dispersion stability. Water depth variations within the shallow range showed negligible influence. To interpret these mechanisms, the traditional rheological threshold theory was modified by introducing a mortar film retention coefficient to account for dispersion inhibition and an effective density difference to incorporate buoyancy effects. Based on these improvements, a rheological threshold model and an enhanced mix design method were established. Experimental validation confirms that the proposed model accurately predicts qualified mix proportion regions, demonstrating improved design precision within the tested shallow-water environmental parameters compared to traditional methods. This study provides a systematic methodology for the rational mix design and quality control of underwater concrete.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Engineering Research Centre of Diagnosis Technology of Hydro-Construction, Chongqing Jiaotong University, Chongqing, 400074, China.
State Key Laboratory of Hydroscience and Engineering, Tsinghua University, Beijing, 100084, China.
Nanjing Hydraulic Research Institute, Nanjing, 210028, China.
References (34)
Show source-provided references
1. 1) Abid, S. R., Hilo, A. N., Ayoob, N. S., & Daek, Y. H. (2019). Underwater abrasion of steel fiber-reinforced self-compacting concrete. Case Studies in Construction Materials, 11, e00299. https://doi.org/10.1016/j.cscm.2019.e0029910.1016/j.cscm.2019.e00299 ↗
2. 2) Assaad, J. J., & Issa, C. A. (2012). Bond strength of epoxy-coated bars in underwater concrete. Construction and Building Materials, 30, 667-674. https://doi.org/10.1016/j.conbuildmat.2011.12.04710.1016/j.conbuildmat.2011.12.047 ↗
3. 3) ASTM. (2005). Standard test method for slump of hydraulic cement concrete (ASTM C143/C143M-05a). West Conshohocken, Pennsylvania: ASTM International.
4. 4) Banfill, P. F. G. (1991). Rheology of fresh cement and concrete. Abingdon, Oxfordshire, UK: Taylor & Francis.10.4324/9780203473290 ↗
5. 5) CECS. (2021). Technical specifications for self compacting concrete application (CECS T/CECS 203-2021). Beijing: China Plan Press.
6. 6) Chen, J., Gao, N., Wu, J., Shan, G., Qiao, M., Ran, Q., & Liu, J. (2020). Effects of the charge density of anionic copolymers on the properties of fresh cement pastes. Construction and Building Materials, 263, 120207. https://doi.org/10.1016/j.conbuildmat.2020.12020710.1016/j.conbuildmat.2020.120207 ↗
7. 7) Chidiac, S. E., & Mahmoodzadeh, F. (2009). Plastic viscosity of fresh concrete – A critical review of predictions methods. Cement and Concrete Composites, 31(8), 535-544. https://doi.org/10.1016/j.cemconcomp.2009.02.00410.1016/j.cemconcomp.2009.02.004 ↗
8. 8) Chidiac, S. E., Maadani, O., Razaqpur, A. G., & Mailvaganam, N. P. (2000). Controlling the quality of fresh concrete—A new approach. Magazine of Concrete Research, 52(5), 353-363. https://doi.org/10.1680/macr.2000.52.5.35310.1680/macr.2000.52.5.353 ↗
9. 9) Diamantonis, N., Marinos, I., Katsiotis, M. S., Sakellariou, A., Papathanasiou, A., Kaloidas, V., & Katsioti, M. (2010). Investigations about the influence of fine additives on the viscosity of cement paste for self-compacting concrete. Construction and Building Materials, 24(8), 1518-1522. https://doi.org/10.1016/j.conbuildmat.2010.02.00510.1016/j.conbuildmat.2010.02.005 ↗
10. 10) EFNARC. (2005). The European guidelines for self-compacting concrete: Specification, production and use. Flums, Switzerland: European Federation for Specialist Construction Chemicals and Concrete Systems
11. 11) Geng, H., Wang, H., Li, X., Wang, L., Zhong, H., & Li, C. (2023). An orthogonal test study on the preparation of self-compacting underwater non-dispersible concrete. Materials, 16(19), 6599. https://doi.org/10.3390/ma1619659910.3390/ma16196599 ↗
12. 12) Golaszewski, J., Kostrzanowska-Siedlarz, A., Cygan, G., & Drewniok, M. (2016). Mortar as a model to predict self-compacting concrete rheological properties as a function of time and temperature. Construction and Building Materials, 124, 1100-1108. https://doi.org/10.1016/j.conbuildmat.2016.08.13610.1016/j.conbuildmat.2016.08.136 ↗
13. 13) Guo, Q., Zhang, T., & Liu, J. (2024). Study of endogenous chloride ion content on the behavior of steel bar depassivation in sea sand concrete. Journal of Building Engineering, 97, 110710. https://doi.org/10.1016/j.jobe.2024.11071010.1016/j.jobe.2024.110710 ↗
14. 14) Hu, C., & De Larrard, F. (1996). The rheology of fresh high-performance concrete. Cement and Concrete Research, 26(2), 283-294. https://doi.org/10.1016/0008-8846(95)00213-810.1016/0008-8846(95)00213-8 ↗
15. 15) Kim, J. H., Kwon, S. H., Kawashima, S., & Yim, H. J. (2017). Rheology of cement paste under high pressure. Cement and Concrete Composites, 77, 60-67. https://doi.org/10.1016/j.cemconcomp.2016.11.00710.1016/j.cemconcomp.2016.11.007 ↗
16. 16) Li, P., Ran, J., Nie, D., & Zhang, W. (2021). Improvement of mix design method based on paste rheological threshold theory for self-compacting concrete using different mineral additions in ternary blends of powders. Construction and Building Materials, 276, 122194. https://doi.org/10.1016/j.conbuildmat.2020.12219410.1016/j.conbuildmat.2020.122194 ↗
17. 17) Li, P., Zhang, T., An, X., & Zhang, J. (2020). An enhanced mix design method of self-compacting concrete with fly ash content based on paste rheological threshold theory and material packing characteristics. Construction and Building Materials, 234, 117380. https://doi.org/10.1016/j.conbuildmat.2019.11738010.1016/j.conbuildmat.2019.117380 ↗
18. 18) Lu, H., Sun, X., & Ma, H. (2022). Anti-washout concrete: An overview. Construction and Building Materials, 344, 128151. https://doi.org/10.1016/j.conbuildmat.2022.12815110.1016/j.conbuildmat.2022.128151 ↗
19. 19) Nasr, A. A., Chen, S., Wang, Y., Jin, F., & Qiu, L.-C. (2022). Strength evaluation of a new underwater concrete type. Case Studies in Construction Materials, 16, e00884. https://doi.org/10.1016/j.cscm.2022.e0088410.1016/j.cscm.2022.e00884 ↗
20. 20) Nie, D., & An, X. (2016). Optimization of SCC mix at paste level by using numerical method based on a paste rheological threshold theory. Construction and Building Materials, 102, 428-434. https://doi.org/10.1016/j.conbuildmat.2015.10.19510.1016/j.conbuildmat.2015.10.195 ↗
21. 21) Okamura, H., & Ouchi, M. (2003). Self-compacting concrete. Journal of Advanced Concrete Technology, 1(1), 5-15. https://doi.org/10.3151/jact.1.510.3151/jact.1.5 ↗
22. 22) Redmon, J., & Farhadi, A. (2017). YOLO9000: Better, faster, stronger. In: 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR). Honolulu, Hawaii 21-26 July 2017. New York: Institute of Electrical and Electronics Engineers, 6517-6525. https://doi.org/10.1109/CVPR.2017.69010.1109/CVPR.2017.690 ↗
23. 23) Roussel, N. (2005). Steady and transient flow behaviour of fresh cement pastes. Cement and Concrete Research, 35(9), 1656-1664. https://doi.org/10.1016/j.cemconres.2004.08.00110.1016/j.cemconres.2004.08.001 ↗
24. 24) Roussel, N., & Coussot, P. (2005). “Fifty-cent rheometer” for yield stress measurements: From slump to spreading flow. Journal of Rheology, 49(3), 705-718. https://doi.org/10.1122/1.187904110.1122/1.1879041 ↗
25. 25) Roussel, N., Stefani, C., & Leroy, R. (2005). From mini-cone test to Abrams cone test: Measurement of cement-based materials yield stress using slump tests. Cement and Concrete Research, 35(5), 817-822. https://doi.org/10.1016/j.cemconres.2004.07.03210.1016/j.cemconres.2004.07.032 ↗
26. 26) Toutou, Z., & Roussel, N. (2007). Multi scale experimental study of concrete rheology: From water scale to gravel scale. Materials and Structures, 39(2), 189-199. https://doi.org/10.1617/s11527-005-9047-y10.1617/s11527-005-9047-y ↗
27. 27) Wang, B., Zhuang, N., Chen, S., Nasr, A. A., & Jin, F. (2024). Filling performance of self-protecting underwater mortar via aggregate interstices in the water environment. Construction and Building Materials, 428, 136328. https://doi.org/10.1016/j.conbuildmat.2024.13632810.1016/j.conbuildmat.2024.136328 ↗
28. 28) Wang, Y., Chen, S., Qiu, L., Nasr, A. A., & Liu, Y. (2023). Experimental study on the slump-flow underwater for anti-washout concrete. Construction and Building Materials, 365, 130026. https://doi.org/10.1016/j.conbuildmat.2022.13002610.1016/j.conbuildmat.2022.130026 ↗
29. 29) Wang, Z., Lian, J., Liu, H., Liang, C., Zou, K., Chen, L., Wang, S., Shao, N., & Yao, Y. (2025). Review on repair technologies for underwater concrete structure damage of infrastructures. Water, 17(1), 0035. https://doi.org/10.3390/w1701003510.3390/w17010035 ↗
30. 30) Wu, Q., & An, X. (2014). Development of a mix design method for SCC based on the rheological characteristics of paste. Construction and Building Materials, 53, 642-651. https://doi.org/10.1016/j.conbuildmat.2013.12.00810.1016/j.conbuildmat.2013.12.008 ↗
31. 31) Yan, W., Cui, W., & Qi, L. (2022). Simulation of underwater concrete movement in flowing water using DEM-CFD coupling method. Construction and Building Materials, 319, 126134. https://doi.org/10.1016/j.conbuildmat.2021.12613410.1016/j.conbuildmat.2021.126134 ↗
32. 32) Zhang, J., An, X., & Nie, D. (2016). Effect of fine aggregate characteristics on the thresholds of self-compacting paste rheological properties. Construction and Building Materials, 116, 355-365. https://doi.org/10.1016/j.conbuildmat.2016.04.06910.1016/j.conbuildmat.2016.04.069 ↗
33. 33) Zhang, J., An, X., Yu, Y., & Nie, D. (2019). Effects of coarse aggregate content on the paste rheological thresholds of fresh self-compacting concrete. Construction and Building Materials, 208, 564-576. https://doi.org/10.1016/j.conbuildmat.2019.02.17710.1016/j.conbuildmat.2019.02.177 ↗
34. 34) Zheng, H., Duan, Y., Xu, B., Sun, Z., Wang, P., Pang, B., & Hou, D. (2025). Performance study of a tough and non-dispersible underwater concrete repair material based on organic–inorganic IPN structure with water-oil composite transition epoxies. Construction and Building Materials, 485, 141964. https://doi.org/10.1016/j.conbuildmat.2025.14196410.1016/j.conbuildmat.2025.141964 ↗