Sectioned Compaction of Low-Binder Concrete Parts
Source abstract
Abstract
Minimizing the use of ordinary portland cement (OPC) in concrete not only enhances cost-performance balance but also significantly reduces carbon emissions. In this research, we develop the technology of sectioned compaction self-assembly (S-CSA), which enables a nearly 50% reduction in OPC content without compromising strength. Through the sectioned operation, the processing system can be based on a relatively small press.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Structural Engineering, University of California, San Diego, La Jolla, CA 92093-0085, U.S.A.
Program of Materials Science and Engineering, University of California, San Diego, La Jolla, CA 92093-0085, U.S.A.
Department of Structural Engineering, and Program of Materials Science and Engineering, University of California, San Diego, La Jolla, CA 92093-0085, U.S.A.
References (47)
Show source-provided references
1. 1) Advani, S. G. and Hsiao, K.-T., (2012). “Manufacturing techniques for polymer matrix composites (PMCs).” Sawston, Cambridge: Woodhead Publishing Limited.10.1533/9780857096258 ↗
2. 2) Ahmad, S. H. and Lue, D. M., (1987). “Flexure-shear interaction of reinforced high strength concrete beams.” Structural Journal, 84(4), 330-341.10.14359/1662 ↗
3. 3) Antunes, A., Soldado, E., Costa, H., Carmo, R. and Julio, E., (2024). “Investigating the influence of SCMs on mechanical performance through experimental Feret's coefficients in low-carbon concrete.” Journal of Advanced Concrete Technology, 22(8), 471-484.10.3151/jact.22.471 ↗
4. 4) Balayssac, J. P., Détriché, C. H. and Grandet, J., (1995). “Effects of curing upon carbonation of concrete.” Construction and Building Materials, 9(2), 91-95.10.1016/0950-0618(95)00001-V ↗
5. 5) Barnard, P. R., (1964). “Researches into the complete stress-strain curve for concrete.” Magazine of Concrete Research, 16(49), 203-210.10.1680/macr.1964.16.49.203 ↗
6. 6) Beaudoin, J. J., (1990). “Handbook of fiber-reinforced concrete. Principles, properties, developments and applications.” Norwich, New York: William Andrew Publishing.
7. 7) Benhelal, E., Zahedi, G., Shamsaei, E. and Bahadori, A., (2013). “Global strategies and potentials to curb CO2 emissions in cement industry.” Journal of Cleaner Production, 51, 142-161.10.1016/j.jclepro.2012.10.049 ↗
8. 8) Bloem, D. L., (1968). “Concrete strength in structures.” ACI Journal Proceedings, 5(6), 176-187.
9. 9) CEMBUREAU, (2024). “Key facts and figures.” Brussels: European Cement Association (CEMBUREAU).
10. 10) Chen, T., Chow, B. J., Zhong, Y., Wang, M., Kou, R. and Qiao, Y., (2018). “Formation of polymer micro-agglomerations in ultralow-binder-content composite based on lunar soil simulant.” Advances in Space Research, 61(3), 830-836.10.1016/j.asr.2017.10.050 ↗
11. 11) Deja, J., Uliasz-Bochenczyk, A. and Mokrzycki, E., (2010). “CO2 emissions from Polish cement industry.” International Journal of Greenhouse Gas Control, 4(4), 583-588.10.1016/j.ijggc.2010.02.002 ↗
12. 12) Fatima, M., Rashid, K. and Blouch, N., (2024). “Thermo-mechano-chemo dynamics of clay’s reactivity and its correlation with limestone calcined clay cement (LC3) performance.” Journal of Advanced Concrete Technology, 22(11), 689-705.10.3151/jact.22.689 ↗
13. 13) Gao, T., Shen, L., Shen, M., Liu, L. and Chen, F., (2016). “Analysis of material flow and consumption in cement production process.” Journal of Cleaner Production, 112, 553-565.10.1016/j.jclepro.2015.08.054 ↗
14. 14) Guo, Z., Zhang, X., Zhang, D. and Wang R., (1982). “Experimental investigation of the complete stress-strain curve of concrete.” Journal of Building Structures, 3(1), 1-12. (in Chinese)
15. 15) Ho, D. W. S., Cui, Q. Y. and Ritchie, D. J., (1989). “The influence of humidity and curing time on the quality of concrete.” Cement and Concrete Research, 19(3), 457-464.10.1016/0008-8846(89)90034-3 ↗
16. 16) Karthik, J. and Jagannathan, P., (2015). “Study of strength parameter of concrete by replacing cement by flyash enriched with microbial agents.” International Research Journal of Engineering and Technology, 2(1), 1-5.
17. 17) Kim, J. K., Moon, Y.-H. and Eo, S.-H., (1998). “Compressive strength development of concrete with different curing time and temperature.” Cement and Concrete Research, 28(12), 1761-1773.10.1016/S0008-8846(98)00164-1 ↗
18. 18) Kisku, N., Joshi, S.-H., Ansari, M., Panda, S. K., Nayak, S. and Dutta, S. C., (2017). “A critical review and assessment for usage of recycled aggregate as sustainable construction material.” Construction and Building Materials, 131, 721-740.10.1016/j.conbuildmat.2016.11.029 ↗
19. 19) Leet, K. and Bernal, D., (1982). “Reinforced concrete design.” New York: McGraw-Hill Education.
20. 20) MacGregor, J. G., Wight, J. K., Teng, S. and Irawan, P., (1997). “Reinforced concrete: Mechanics and design, Vol. 3.” Upper Saddle River, New Jersey: Pearson Prentice Hall.
21. 21) Madlool, N. A., Saidur, R., Hossain, M. S. and Rahim, N. A., (2011). “A critical review on energy use and savings in the cement industries.” Renewable and Sustainable Energy Reviews, 15(4), 2042-2060.10.1016/j.rser.2011.01.005 ↗
22. 22) Mahasenan, N., Smith, S. and Humphreys, K., (2003). “The cement industry and global climate change: Current and potential future cement industry CO2 emissions.” In: Proc. 6th International Conference on Greenhouse Gas Control Technologies, Kyoto 1-4 October 2002. Oxford: Peragamon Press, Vol. II, 995-1000.10.1016/B978-008044276-1/50157-4 ↗
23. 23) Marceau, M. L., Gajda, J. and VanGeem, M. G., (2002). “Use of fly ash in concrete: Normal and high volume ranges (R&D Serial No. 2604).” Skokie, Illinois: Portland Cement Association.
24. 24) Mehta, P. K., (1986). “Concrete: Structure, properties and materials.” Englewood Cliffs, New Jersey: Prentice-Hall Inc.
25. 25) Mirza, S. A., MacGregor, J. G. and Hatzinikolas, M., (1979). “Statistical descriptions of strength of concrete.” Journal of the Structural Division (ASCE), 105(6), 1021-1037.10.1061/JSDEAG.0005161 ↗
26. 26) Oh, K., Chen, T., Gasser, A., Kou, R. and Quiao, Y., (2019). “Compaction self-assembly of ultralow-binder-content particulate composites.” Composites Part B: Engineering, 175, 107144.10.1016/j.compositesb.2019.107144 ↗
27. 27) Oh, K., Chen, T., Kou, R., Yi, H. and Qiao, Y., (2020a). “Ultralow-binder-content thermoplastic composites based on lunar soil simulant.” Advances in Space Research, 66(9), 2245-2250.10.1016/j.asr.2020.07.041 ↗
28. 28) Oh, K., Yi, H., Chen, T., Chow, B., Kou, R. and Qiao, Y., (2020b). “Impact formation of ultralow-binder-content composite ‘lunar cement’.” CEAS Space Journal, 13, 183-187.10.1007/s12567-020-00327-3 ↗
29. 29) Oh, K., Yi, H., Kou, R. and Qiao, Y., (2020c). “Compaction self-assembly of a low-binder-content geopolymer material.” Journal of Materials Science, 55, 15397-15404.10.1007/s10853-020-05069-5 ↗
30. 30) Oh, K., Yi, H., Kou, R. and Qiao, Y., (2020d). “Sectioned processing of compaction self-assembly of an ultralow-binder-content particulate composite.” Composites Communications, 23, 100588.10.1016/j.coco.2020.100588 ↗
31. 31) Park, R. and Paulay, T., (1975). “Reinforced concrete structures.” Hoboken, New Jersey: John Wiley & Sons.10.1002/9780470172834 ↗
32. 32) Popovics, S., (1973). “A numerical approach to the complete stress-strain curve of concrete.” Cement and Concrete Research, 3(5), 583-599.10.1016/0008-8846(73)90096-3 ↗
33. 33) Popovics, S., (1998). “Strength and related properties of concrete: A quantitative approach.” Hoboken, New Jersey: John Wiley & Sons.
34. 34) Rabi, M., Cashell, K. A. and Shamass, R., (2019). “Flexural analysis and design of stainless steel reinforced concrete beams.” Engineering Structures, 198, 109432.10.1016/j.engstruct.2019.109432 ↗
35. 35) Rashid, K. and Masud, F., (2024). “Developing high-strength geopolymer using least activator and pressure-applied casting: Techno-enviro-economic performance.” Journal of Advanced Concrete Technology, 22(6), 327-343.10.3151/jact.22.327 ↗
36. 36) Song, P. S. and Hwang, S., (2004). “Mechanical properties of high-strength steel fiber-reinforced concrete.” Construction and Building Materials, 18(9), 669-673.10.1016/j.conbuildmat.2004.04.027 ↗
37. 37) Su, H., Hong, Y., Chen, T., Kou, R., Wang, M., Zhong, Y. and Qiao, Y., (2019). “Fatigue behavior of inorganic-organic hybrid ‘lunar cement’.” Scientific Reports, 9(1), 2238.10.1038/s41598-019-38799-x ↗
38. 38) Suherman, H., Sulong, A. B. and Sahari, J., (2013). “Effect of the compression molding parameters on the in-plane and through-plane conductivity of carbon nanotubes/graphite/epoxy nanocomposites as bipolar plate material for a polymer electrolyte membrane fuel cell.” Ceramics International, 39(2), 1277-1284.10.1016/j.ceramint.2012.07.059 ↗
39. 39) Takahashi, H. and Maruyama, I., (2024). “Quantification of CO2 in cement pastes with different degrees of carbonation.” Journal of Advanced Concrete Technology, 22(11), 706-715.10.3151/jact.22.706 ↗
40. 40) Tatara, R. A., (2017). “Compression molding.” In: M. Kutz, Ed. Applied Plastics Engineering Handbook. Amsterdam: Elsevier B. V., 291-320.10.1016/B978-0-323-39040-8.00014-6 ↗
41. 41) Wang, J., Dai, Q., Si, R. and Guo, S., (2018). “Investigation of properties and performances of polyvinyl alcohol (PVA) fiber-reinforced rubber concrete.” Construction and Building Materials, 193, 631-642.10.1016/j.conbuildmat.2018.11.002 ↗
42. 42) Wilson, M. L. and Kosmatka, S. H., (2011). “Design and control of concrete mixtures.” Skokie, Illinois: Portland Cement Association.
43. 43) Winnefeld, F., Tiefenthaler, J. and Leemann A., (2024). “Carbonated concrete slurry waste as supplementary cementitious material.” Journal of Advanced Concrete Technology, 22(8), 485-498.10.3151/jact.22.485 ↗
44. 44) Xu, G. and Shi, X., (2018). “Characteristics and applications of fly ash as a sustainable construction material: A state-of-the-art review.” Resources, Conservation and Recycling, 136, 95-109.10.1016/j.resconrec.2018.04.010 ↗
45. 45) Yi, H., (2022). “Developing the technology of compaction self-assembly for green construction materials.” Thesis (PhD). University of California San Diego.
46. 46) Yi, H., Oh, K., Kou, R. and Qiao, Y., (2020). “Sand-filler structural material with a low content of polyethylene binder.” Sustainable Materials and Technologies, 25, e00194.10.1016/j.susmat.2020.e00194 ↗
47. 47) Zollo, R. F., (1997). “Fiber-reinforced concrete: An overview after 30 years of development.” Cement and Concrete Composites, 19(2), 107-122.10.1016/S0958-9465(96)00046-7 ↗