Case Study on the Effect of Mechanically-compacting Flowable Concrete with Low CO2 Emission on Productivity, Economic Efficiency, and Environmental Impact
Source abstract
Abstract
The authors are developing mechanically-compacting flowable concrete with low CO2 emission for rationalization, labor reduction in concrete work, and reduction of CO2 emissions. In this paper, as a case study on the application of developed concrete, a concrete mix and a combination of reinforcement materials that satisfy the design criteria strength and specified durability have been set, and their application in terms of productivity, economy, and environmental impact has been estimated. The desired improvement in productivity and reduction in CO2 emissions could be achieved, and the construction costs required to achieve these goals were generally understood. The CO2 price in CO2 emissions trading was calculated for each case, and it was shown that the CO2 price depends on the CO2 reduction measure.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Civil Material/Ground Group, Civil Engineering Research Department, Institute of Technology, TOKYU CONSTRUCTION CO., LTD., Kanagawa, Japan.
Department of Civil Engineering, Faculty of Science and Technology, Tokyo University of Science, Chiba, Japan.
References (26)
Show source-provided references
1. 1) Antunes, A., Soldado, E., Costa, H., do Carmo, R. and Júlio, E., (2024). “Investigating the influence of SCMS on mechanical performance through experimental Feret’s coefficients in low-carbon concrete.” Journal of Advanced Concrete Technology, 22(8), 471-484.10.3151/jact.22.471 ↗
2. 2) Bui, N. K., Kurihara, R., Wang, W., Kanematsu, M., Hyodo, H., Takano, M., Hirao, H., Noguchi, T. and Maruyama, I., (2023). “Wet-carbonation-based mineral extraction and CO2 sequestration using concrete waste fines at a low temperature.” Journal of Advanced Concrete Technology, 21(3), 166-188.10.3151/jact.21.166 ↗
3. 3) Chiba Prefecture Ready-mixed Concrete Association, (2022). “Summary of quality control audits 2021.” Chiba: Chiba Prefecture Ready-mixed Concrete Association. (in Japanese)
4. 4) Hashimoto, R. and Onoue, K., (2023). “Crack resistance under compressive stress of concrete made using granulated blast-furnace slag sand.” Journal of Advanced Concrete Technology, 21(1), 17-24.10.3151/jact.21.17 ↗
5. 5) Igarashi, G., Ichimiya, M., Ohya, F. and Ishida, T., (2022). “Numerical simulation of dimensional stability of precast segments exposed to solar radiation during yard storage.” Journal of Advanced Concrete Technology, 20(3), 200-211.10.3151/jact.20.200 ↗
6. 6) IPCC, (2023). “Special report: Global warming of 1.5°C.” Geneva: The Intergovernmental Panel on Climate Change.
7. 7) JCA, (2023). “Summary of LCI data for cement.” Tokyo: Japan Cement Association. (in Japanese)
8. 8) JCPSA, (2024). “Construction prices, No. 1305.” Tokyo: Japan Construction Price Survey Association. (in Japanese)
9. 9) J-Credit, (2024). “J-Credit system certified credit list [online].” Tokyo, Ministry of Economy, Trade and Industry, Ministry of the Environment and Ministry of Agriculture, Forestry and Fisheries. Available from: < https://japancredit.go.jp/sale/index.php#result > [Accessed 2 May 2024]. (in Japanese)
10. 10) JSCE, (2012). “Concrete Technology Series 62: Environmental impact of concrete (Part 2).” Tokyo: Japan Society of Civil Engineers. (in Japanese)
11. 11) JSCE, (2018). “Concrete Library 152: Recommendations for design and construction of concrete structures containing high-volume mineral admixtures.” Tokyo: Japan Society of Civil Engineers. (in Japanese)
12. 12) JSCE, (2023a). “Concrete Library 161: Recommendations for mix design and construction of mechanically-compacting flowable concrete.” Tokyo: Japan Society of Civil Engineers. (in Japanese)
13. 13) JSCE, (2023b). “Standard specification for concrete - 2022, Design.” Tokyo: Japan Society of Civil Engineers. (in Japanese)
14. 14) JSCE, (2024). “Standard specifications for concrete structures, English summary edition [online].” Tokyo, Japan Society of Civil Engineers. Available from: < https://www.jsce.or.jp/committee/concrete/e/web/pdf/Summary_edition_20240227.pdf > [Accessed 14 June 2024].
15. 15) Kawai, K., (2012). “Evaluation of environmental impact of concrete (1): Environmental impact of concrete.” Concrete Engineering, 50(6), 554-561. (in Japanese)10.3151/coj.50.554 ↗
16. 16) Nakamura, S., Kawabata, Y. and Tatsumi, D., (2022). “Fundamental study on the calculation of CO₂ emissions from construction of port structures - Investigation on the pre-estimation method and trial calculation of CO₂ emissions from construction of port structures (Technical Note 1399).” Yokosuka, Kanagawa Prefecture, Japan: Ports and Airports Research Institute. (in Japanese)
17. 17) NILIM, (2019). “Guidance for calculating carbon dioxide emissions throughout the life cycle of social capital (draft).” Tsukuba, Ibaraki: National Institute for Land and Infrastructure Management. (in Japanese)
18. 18) Okamura, H. and Ouchi, M., (2003). “Self-compacting concrete.” Journal of Advanced Concrete Technology, 1(1), 5-15.10.3151/jact.1.5 ↗
19. 19) PWRI, (2016). “Joint research report on utilization technology of low-carbon cement binders (V).” Tsukuba, Ibaraki: Public Works Research Institute. (in Japanese)
20. 20) Rashid, K. and Masud, F., (2024). “Developing high-strength geopolymer using least activator and pressure-applied casting: Techno-enviro-economic performance.” Journal of Advanced Concrete Technology, 22(5), 327-343.10.3151/jact.22.327 ↗
21. 21) Suzuki, M. and Hayakawa, K., (2023). “Study on setting compaction method of mechanically-compacting flowable concrete.” Tokyu Construction Institute of Technology Bulletin, 48, 65-68. (in Japanese)
22. 22) Suzuki, M., Hayakawa, K., Takahashi, H. and Kato, Y., (2023). "Towards the realization of automated concrete work utilizing mechanically compacting flowable concrete with low CO2 emissions." In:
23. Environment, Fukuroi City, Shizuoka Prefecture, Japan 12-14 July 2023. Fukuroi: Shizuoka Institute of Science and Technology, UA230035-IV.
24. 23) Takahashi, H. and Kato, Y., (2022). “Study on water permeation rate coefficient of carbonated concrete.” Proceedings of the Concrete Structure Scenarios, JSMS, 22, 103-106. (in Japanese)
25. 24) Takahashi, H., Suzuki, M., Kato, Y. and Hayakawa, K., (2024). “Foundation properties of mechanically-compacting flowable concrete with high-volume GGBS.” Cement and Concrete Journal, 77(1), 410-417. (in Japanese)10.14250/cement.77.410 ↗
26. 25) Teo, W., Shirai, K. and Lim, J. H., (2023). “Characterisation of “one-part” ambient cured engineered geopolymer composites.” Journal of Advanced Concrete Technology, 21(4), 204-217.10.3151/jact.21.204 ↗