Retraction: Influence of Relative Mechanical Strengths between New and Old Cement Mortars on the Crack Propagation of Recycled Aggregate Concrete
This record is marked as retracted by the source. Review the publisher’s notice before using its findings.
Source abstract
Abstract
We reported “Influence of Relative Mechanical Strengths between New and Old Cement Mortars on the Crack Propagation of Recycled Aggregate Concrete” in Journal of Advanced Concrete Technology, Vol. 15 (2017) No. 3 p. 110-125; doi: 10.3151/jact.15.110. After publication of the paper, we have become aware of the copyright violation from the original research. We therefore wished to retract the paper and apologize for any inconvenience caused by the retraction.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Centre for Built Infrastructure Research (CBIR), School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, Australia.
Department of Civil and Environmental Engineering, University of Louisville, Louisville, USA.
School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, Australia.
Center for Advanced Cement-Based Materials (ACBM), Department of Civil and Environmental Engineering, Northwestern University, Evanston, USA.
References (37)
Show source-provided references
1. 1) Asahina, D., Landis, E. N., and Bolander, J. E., (2011). “Modeling of phase interfaces during pre-critical crack growth in concrete.” Cement and Concrete Composites, 33(9), 966-977.10.1016/j.cemconcomp.2011.01.007 ↗
2. 2) Bazant, Z., Tabbara, M., Kazemi, M., and Pijaudier-Cabot, G., (1990). “Random particle model for fracture of aggregate or fiber composites.” Journal of Engineering Mechanics, 116(8), 686-1705.
3. 3) Bobko, C. and Ulm, F.-J., (2008). “The nano-mechanical morphology of shale.” Mechanics of Materials, 40(4-5), 318-337.10.1016/j.mechmat.2007.09.006 ↗
4. 4) Choi, S. and Shah, S. P., (1999). “Propagation of microcracks in concrete studied with subregion scanning computer vision (SSCV).” ACI Materials Journal, 96(2), 255-260.
5. 5) Cicekli, U., Voyiadjis, G. Z. and Abu Al-Rub, R. K., (2007). “A plasticity and anisotropic damage model for plain concrete.” International Journal of Plasticity, 23(10-11), 1874-1900.10.1016/j.ijplas.2007.03.006 ↗
6. 6) Corr, D., Accardi, M., Graham-Brady, L. and Shah, S. P., (2007). “Digital image correlation analysis of interfacial debonding properties and fracture behavior in concrete.” Engineering Fracture Mechanics, 74(1-2), 109-121.10.1016/j.engfracmech.2006.01.035 ↗
7. 7) Cusatis, G., Pelessone, D. and Mencarelli, A., (2011a). “Lattice discrete particle model (LDPM) for concrete failure behavior of concrete. I: Theory.” Cement and Concrete Composites, 33(9), 881-890.10.1016/j.cemconcomp.2011.02.011 ↗
8. 8) Cusatis, G., Mencarelli, A., Pelessone, D. and Baylot, J., (2011b). “Lattice Discrete Particle Model (LDPM) for failure behavior of concrete. II: Calibration and validation.” Cement and Concrete Composites, 33(9), 891-905.10.1016/j.cemconcomp.2011.02.010 ↗
9. 9) Etxeberria, M., Vazquez, E. and Mari, A., (2006). “Microstructure analysis of hardened recycled aggregate concrete.” Magazine of Concrete Research, 58(10), 683-690.10.1680/macr.2006.58.10.683 ↗
10. 10) Ghouse, M. D., Rao, L. C. and Rao, B. N., (2010). “Numerical simulation of fracture process in cement concrete using unit cell approach.” Mechanics of Advanced Materials and Structures, 17(7), 481-487.10.1080/15376494.2010.509189 ↗
11. 11) Hendriks, Ch. F. and Pietersen, H. S., (2000). “Sustainable raw materials: construction and demolitionwaste.” RILEM Publications, France.
12. 12) Igarashi, S, Bentur, A and Mindess, S., (1996). “Microhardness testing of cementitious materials.” Advanced Cement Based Materials, 4(2), 48-57.10.1016/S1065-7355(96)90051-6 ↗
13. 13) Kim, S. M. and Abu Al-Rub, R K, (2011). “Meso-scale computational modeling of the plastic-damage response of cementitious composites.” Cement and Concrete Research, 41(3), 339-358.10.1016/j.cemconres.2010.12.002 ↗
14. 14) Kwan, A. K. H., Wang, Z. M. and Chan, H. C., (1999). “Mesoscopic study of concrete II: nonlinear finite element analysis.” Computer & Structures, 70(5), 545-556.10.1016/S0045-7949(98)00178-3 ↗
15. 15) Li, W. G., Xiao, J. Z., Sun, Z., Kawashima, S. and Shah, S. P., (2012a). “Interfacial transition zones in recycled aggregate concrete with different mixing approaches.” Construction and Building Materials, 35, 1045-1055.10.1016/j.conbuildmat.2012.06.022 ↗
16. 16) Li, W. G., Xiao, J., Shi, C. J., Poon, C. S., (2015). “Structural behaviour of composite members with recycled aggregate concrete-an overview.” Advances in Structural Engineering, 18(6), 919-938.10.1260/1369-4332.18.6.919 ↗
17. 17) Li, W. G., Xiao, J., Sun, Z. and Shah, S. P., (2012b). “Failure processes of modeled recycled aggregate concrete under uniaxial compression.” Cement and Concrete Composites, 34(10), 1149-1158.10.1016/j.cemconcomp.2012.06.017 ↗
18. 18) Lilliu, G. and van Mier, J. G. M., (2007). “On the relative use of micro-mechanical lattice analysis of 3-phase particle composites.” Engineering Fracture Mechanics, 74, 1174-1189.10.1016/j.engfracmech.2006.12.018 ↗
19. 19) Liu, Q., Xiao, J. Z. and Sun, Z., (2011). “Experimental study on the failure mechanism of recycled concrete.” Cement and Concrete Research, 41(10), 1050-1057.10.1016/j.cemconres.2011.06.007 ↗
20. 20) Maji, A. K. and Shah, S. P., (1989). “Application of acoustic emission and laser holography to study microfracture in concrete.” ACI Materials Journal, 112, 83-110.
21. 21) Mondal, P., Shah, S. P. and Marks, L. D., (2008). “Nanoscale characterization of cementitious materials.” ACI Materials Journal, 105(2), 174-179.
22. 22) Otsuki, N., Miyazato, S. and Yodsudjai, W., (2003). “Influence of recycled aggregate on interfacial transition zone, strength, chloride penetration and carbonation of concrete.” Journal of Materials in Civil Engineering, 15(5), 443-451.10.1061/(ASCE)0899-1561(2003)15:5(443) ↗
23. 23) Ramesh, G., Sotelino, E. D. and Chen, W. F., (1996). “Effect of transition zone on elastic moduli of concrete materials.” Cement and Concrete Research, 26(4), 611-622.10.1016/0008-8846(96)00016-6 ↗
24. 24) Rasheeduzzafar, I. B. and Khan, A., (1984). “Recycled concrete - a source of new concrete.” ASTM Cement, Concrete and Aggregates, 6(1), 17-27.10.1520/CCA10349J ↗
25. 25) Tam, V. W. Y., Gao X. F. and Tam, C. M., (2005). “Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach.” Cement and Concrete Research, 35(6), 1195-1203.10.1016/j.cemconres.2004.10.025 ↗
26. 26) Taylor, H. F. W., (1997). “Cement chemistry.” Thomas Telford Ltd, Second Edition, United Kingdom.
27. 27) Tregger, N., Corr, D., Graham-Brady, L. and Shah, S. P., (2006). “Modeling the effect of mesoscale randomness on concrete fracture.” Probabilistic Engineering Mechanics, 21, 217-225.10.1016/j.probengmech.2005.11.002 ↗
28. 28) Xiao, J., Qu, W., Li, W. G. and Zhu, P., (2016). “Investigation on effect of aggregate on three non-destructive testing properties of concrete subjected to sulfuric acid attack.” Construction and Building Materials, 115, 486-495.10.1016/j.conbuildmat.2016.04.017 ↗
29. 29) Xiao, J., Li, J. B. and Zhang, C., (2005). “Mechanical properties of recycled aggregate concrete under uniaxial loading.” Cement and Concrete Research, 35(6), 1187-1194.10.1016/j.cemconres.2004.09.020 ↗
30. 30) Xiao J. Z., Li, W. G., Corr, D. J. and Shah, S. P., (2013a). “Simulation study on the stress distribution in modeled recycled aggregate concrete under uniaxial compression.” Journal of Materials in Civil Engineering, 25(4), 504-518.10.1061/(ASCE)MT.1943-5533.0000598 ↗
31. 31) Xiao J. Z, Li W. G., Corr, D. J. and Shah, S. P., (2013b). “Effects of interfacial transition zones on the stress-strain behavior of modeled recycled aggregate concrete.” Cement and Concrete Research, 52, 82-99.10.1016/j.cemconres.2013.05.004 ↗
32. 32) Xiao, J. Z., Li, W. G. and Poon, C. S., (2012a). “Recent studies on mechanical properties of recycled aggregate concrete in China-a review.” Science China Technological Sciences, 55(6), 1463-1480.10.1007/s11431-012-4786-9 ↗
33. 33) Xiao, J., Li, W. G., Sun, Z., Lange, D. A. and Shah, S. P., (2013c). “Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation.” Cement and Concrete Composites, 37, 276-292.10.1016/j.cemconcomp.2013.01.006 ↗
34. 34) Xiao, J. Z, Li, W. G, Sun, Z. and Shah, S. P., (2012b). “Crack propagation in recycled aggregate concrete under uniaxial compressive loading.” ACI Materials Journal, 109(4), 451-461.10.14359/51683920 ↗
35. 35) Yang, Z., Su, X. T., Chen, J. F. and Liu, G. H., (2009). “Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials.” International Journal of Solids and Structures, 46(17), 3222-3234.10.1016/j.ijsolstr.2009.04.013 ↗
36. 36) Yip, M., Li, Z., Liao, B. S. and Bolander, J. E., (2006). “Irregular lattice models of fracture of multiphase particulate materials.” International Journal of Fracture, 140, 113-124.10.1007/s10704-006-7636-6 ↗
37. 37) Yu, H. X., Burgess, I. W., Davison, J. B. and Plank, R. J., (2008). “Numerical simulation of bolted steel connections in fire using explicit dynamic analysis.” Journal of Constructional Steel Research, 64(5), 515-525.10.1016/j.jcsr.2007.10.009 ↗