Corrosion Resistance of Functionally Graded Coatings on Plain Steel Rebars
Source abstract
Abstract
The experimental results obtained on steel rebars with coatings of Si-based particles are described in this paper. It is well known that adding Si to metals generally increases their corrosion, oxidation, and erosion resistance. In this study, it is chosen to use Si-based coatings because of their proven capacity for corrosion protection in Cl- environments. In addition, this paper presents impedance spectroscopy as an alternate technique in determining the corrosion activity of coated steel rebars. Impedance spectroscopy is an electrochemical measurement technique, which measures the response of a system to an applied alternating signal. A major benefit of the technique is its ability to monitor both the bulk and interfacial responses. This research was conducted to characterize the impedance response of several coatings on steel rebars, and in so doing, further understanding of the corrosion susceptibility of the systems. The results suggest that impedance spectroscopy may be useful for monitoring corrosion activity on coated rebar.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete Corrosion and Durability · Smart Materials for Construction · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil Engineering, Northwestern University
Department of Civil Engineering, Democritus University of Thrace
Vartech, Inc.
Department of Materials Science and Engineering, Center for Advanced-Cement Based Materials, Northwestern University
References (12)
Show source-provided references
1. Brantervik, K. and Niklasson, G. A. (1991). “Circuit models for cement based materials obtained from impedance spectroscopy.” Cement and Concrete Research, 21 (4), 496-508.10.1016/0008-8846(91)90099-4 ↗
2. Callaghan, B. G. (1993). “The performance of a 12% chromium steel in concrete in severe marine environments.” Corrosion Science, 35 (5), 1535-1541.10.1016/0010-938X(93)90381-P ↗
3. Christensen, B. J., Coverdale, R. T., Olson, R. A., Ford, S. J., Garboczi, E, J. and Jennings, H. M. (1994). “Impedance spectroscopy of hydrating cement-based materials: Measurement, interpretation, and application.” Journal of the American Ceramic Society, 77 (11), 2789-2804.10.1111/j.1151-2916.1994.tb04507.x ↗
4. Ford, S. J. (1998). “Monitoring the Corrosion of Reinforcing Steel in Cement-Based Systems Using Impedance Spectroscopy.” Northwestern University, Evanston, Illinois, Thesis.
5. Ford, S. J., Shane, J. D. and Mason, T. O. (1998). “Assignment of features in impedance spectra of the cement-paste/steel system.” Cement and Concrete Research, 28 (12), 1737-1751.10.1016/S0008-8846(98)00156-2 ↗
6. Gu, P., Xie, P., Beaudoin, J. J. and Brousseau, R. (1992). “AC impedance spectroscopy (I): A new equivalent circuit model for hydrated portland cement paste.” Cement and Concrete Research, 22 (5), 833-840.10.1016/0008-8846(92)90107-7 ↗
7. Lemoine, L., Wenger, F. and Galland, J. (1990). “Study of the corrosion of concrete reinforcement by electrochemical impedance measurement: Corrosion rates of steel in concrete.” (N. S. Berke, V. Chaker and D. Whiting (Eds)). ASTM, Philadelphia.
8. Maccarter, W. J., Garvin, S. and Bouzid, N. (1988). “Impedance measurements on cement paste.” Journal of Materials Science Letters, 7 (10), 1056-1057.10.1007/BF00720825 ↗
9. Macdonald, J. R. (1987). “Impedance Spectroscopy: Emphasizing Solid Materials and Systems.” John Wiley & Sons, New York.
10. Sanjurjo, A., Hettiarachchi, S. and Lau, K. (1993). “Development of Metallic Coatings for Corrosion Protection of Steel Rebars.” SHRP Report I-622, National Research Council, Washington, DC.
11. Scuderi, C. A., Mason, T. O. and Jennings, H. M. (1991). “Impedance spectra of hydrating cement paste.” Journal of Materials Science, 26, 349-353.10.1007/BF00576526 ↗
12. Uhlig, H. H. and Revie, W. R. (1985). “Corrosion and Corrosion Control: An Introduction to Corrosion Science and Engineering.” John Wiley & Sons, New York.