Semi-quantitative Prediction of the Corrosion Risk of Steel in Concrete Using XRD Analysis
Source abstract
Abstract
The present study concerns a technique for determining the chloride binding capacity, using the XRD curve containing the peaks for Friedel' s salt. The influence of chloride binding on the corrosion behaviour was also evaluated. The binding capacity of chloride ions in cement paste was determined by the water extraction method. As a result, it was found that the chloride binding capacity is strongly dependent on the W/C, binder type, curing age and total chloride concentration in the paste. It is notable that chloride binding has a crucial influence on corrosion propagation: an increase in the binding capacity resulted in a decrease in the corrosion rate at a given chloride concentration in mortar specimens. However, the impact of chloride binding on the onset of corrosion was marginal, presumably due to a release of bound chlorides into free chlorides at the stage of corrosion, accompanying a pH fall in the vicinity of the steel. A strong relation between the peak intensity for Friedel' s salt and the concentration of bound chloride was observed, which can be used to determine the bound chlorides and thus the risk of chloride-induced corrosion of steel in concrete.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Infrastructure Research, Korea Institute of Construction Technology, Republic of Korea.
School of Civil and Environmental Engineering, Yonsei University, Republic of Korea.
References (19)
Show source-provided references
1. Alonso, C., Castellote, M. and Andrade, C., (2002). “Chloride threshold dependence of pitting potential of reinforcements.” Electrochemica Acta, 47(21), 3469-3481.10.1016/S0013-4686(02)00283-9 ↗
2. Ann, K. Y., (2005). “Enhancing the chloride threshold level for steel corrosion in concrete.” Thesis (PhD). Imperial College, London.
3. Ann, K. Y., Song, H. W., Lee, C. H. and Jung, M. S., (2007). “Chloride binding capacity of cementitious materials and its influence on concrete structures.&rdquo
4. Concrete under Severe Conditions: Environments and Loading (CONSEC' 07), In: Proceedings of the 5th International Conference on Concrete under Severe Conditions: Environment and Loading, 4-6 June 2007, Tours, France, 351-360.
5. Arya, C., Buenfeld, N. R. and Newman, J. B., (1990). “Factors influencing chloride binding in concrete.” Cement and Concrete Research, 20(2), 291-300.10.1016/0008-8846(90)90083-A ↗
6. Arya, C., Buenfeld, N. R. and Newman, J. B., (1987). “Assessment of simple methods of determining the free chloride ion content of cement paste.” Cement and Concrete Research, 17(6), 907-918.10.1016/0008-8846(87)90079-2 ↗
7. Arya, C. and Newman, J. B., (1990). “An assessment of four methods of determining the free chloride content of concrete.” Materials and Structures, 23(5), 319-330.10.1007/BF02472710 ↗
8. ASTM C 1218, (1999). “Standard test method for water-soluble chloride in mortar and concrete.”
9. Byfors, K., Hansson, C. M. and Tritthart, J., (1986). “Pore solution expression as a method to determine the influence of mineral additives on chloride binding.” Cement and Concrete Research, 16(5), 760-770.10.1016/0008-8846(86)90050-5 ↗
10. Glass, G. K. and Buenfeld, N. R., (2000). “The influence of chloride binding on the chloride induced corrosion risk in reinforced concrete.” Corrosion Science, 42(2), 329-344.10.1016/S0010-938X(99)00083-9 ↗
11. Glass, G. K., Wang, Y. and Buenfeld, N. R., (1996). “An investigation of experimental methods used to determine free and total chloride contents.” Cement Concrete Research, 26(9), 1443-1449.10.1016/0008-8846(96)00115-9 ↗
12. Glass, G. K., Reddy, B. and Buenfeld, N. R., (2000). “The participation of bound chloride in passive film breakdown on steel in concrete.” Corrosion Science, 42(11), 2013-2021.10.1016/S0010-938X(00)00040-8 ↗
13. Glass, G. K. and Buenfeld, N. R., (1997). “The presentation of the chloride threshold level for corrosion of steel in concrete.” Corrosion Science, 39(5), 1001-1013.10.1016/S0010-938X(97)00009-7 ↗
14. Goñi, S. and Guerrero, A., (2003). “Accelerated carbonation of Friedel' s salt in calcium aluminate cement paste.” Cement and Concrete Research, 33(1), 21-26.10.1016/S0008-8846(02)00910-9 ↗
15. Hope, B. B., Page, J. A., and Poland, J. S., (1985). “The determination of chloride content of concrete.” Cement and Concrete Research, 15(5), 863-870.10.1016/0008-8846(85)90153-X ↗
16. Page, C. L., Short, N. R. and Holden, W. R., (1986). “The influence of different cements on chloride induced corrosion of reinforcing steel.” Cement and Concrete Research, 16(1), 79-86.10.1016/0008-8846(86)90071-2 ↗
17. Song, H. W., Jung, M. S., Lee, C. H., Kim, S.-H. and Ann, K. Y., (2008). “Influence of chemistry of chloride ions in cement matrix on corrosion of steel.” ACI Materials Journal, 107(4), 332-339.
18. Song, H. W., Lee, C. H., Jung, M. S. and Ann, K. Y., (2008). “Development of chloride binding capacity in cement pastes and influence of the pH of hydration products.” Canadian Journal of Civil Engineering, 35(12), 1427-1434.10.1139/L08-089 ↗
19. Tritthart, J., (1989). “Chloride binding in cement, I. Investigation to determine the composition of porewater in hardened cement.” Cement Concrete Research, 19(4), 586-594.