journal article·2021-11-17Open access

Mix Design Processing for Self Compacting Geopolymer Mortar

Muhammad Talha Ghafoor, Chikako Fujiyama, Koichi Maekawa

Abstract

The mortar flow and flow speed of self-compacting geopolymer mortar (SCGM) were determined by considering the various influencing parameters for the normal self-compacting mortar (SCM) and geopolymer mortar (GM). The test results showed that the effect of volume of water to volume of powder on the relative flow area (Gm) and relative flow speed (Rm) was different compared to normal SCM due to the high viscosity of matrix. The flow properties of SCGM were analyzed in terms of volume of water to volume of powder ratio, and superplasticizer to powder ratio, powder to sand ratio, viscosity of alkaline liquid and the water to geopolymer solid ratio. According to the analysis, flow prediction models for SCGM were formulated based on the parameters of both physical and chemical point of view. Moreover, a mix design of SCGM including a flow chart and mathematical expression was also proposed. This indicates that the typical volume ratio of SCGM was similar to SCM considering the volume of alkaline liquid with water in SCGM was equivalent to the volume of water in SCM.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Graduate School of Urban Innovation, Department of Civil Engineering, Yokohama National University, Kanagawa, 240-8501, Japan.

References (27)

Show source-provided references
1. 1) Aliabdo, A. A., Abd Elmoaty, A. E. M. and Salem, H. A., (2016). “Effect of cement addition, solution resting time and curing characteristics on fly ash based geopolymer concrete performance.” Construction and Building Materials, 123, 581-593.10.1016/j.conbuildmat.2016.07.043 ↗
2. 2) ASTM, (2014). “Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete (ASTM C618-12a).” American Society for Testing and Materials, West Conshohocken, PA: ASTM International.
3. 3) Ban, C. C. and Ramli, M., (2010). “Optimization of mix proportion of high performance mortar for structural applications.” American Journal of Engineering and Applied Sciences, 3(4), 643-649.10.3844/ajeassp.2010.643.649 ↗
4. 4) Belaidi, A. S. E., Kenai, S., Kadri, E. H., Soualhi, H. and Benchaâ, B., (2016). “Effects of experimental ternary cements on fresh and hardened properties of self-compacting concretes.” Journal of Adhesion Science and Technology, 30(3), 247-261.10.1080/01694243.2015.1099864 ↗
5. 5) Benabed, B., Kadri, E. H., Azzouz, L. and Kenai, S., (2012). “Properties of self-compacting mortar made with various types of sand.” Cement and Concrete Composites, 34(10), 1167-1173.10.1016/j.cemconcomp.2012.07.007 ↗
6. 6) BIBM, CEMBUREU, ERMCO, EFCA and EFNARC, (2005). “The European guidelines for self-compacting concrete.” The European Precast Concrete Organisation, The European Cement Association, The European Ready-mix Concrete Organisation, The European Fedaration of Concrete Admixture Associations, The European Federation od Specialist Construction Chemical and Concrete Systems, p. 63, Available at: https://www.theconcreteinitiative.eu/images/ECP_Documents/EuropeanGuidelinesSelfCompactingConcrete.pdf.
7. 7) Davidovits, J., (1994). “Properties of geopolymer cements.” First International Conference on Alkaline Cements and Concretes, 131-149.
8. 8) Davidovits, J., (2013). “Geopolymer cement a review.” Geopolymer Science and Technics, (0), 1-11.
9. 9) Dils, J., De Schutter, G. and Boel, V., (2012). “Influence of mixing procedure and mixer type on fresh and hardened properties of concrete: A review.” Materials and Structures/Materiaux et Constructions, 45(11), 1673-1683.10.1617/s11527-012-9864-8 ↗
10. 10) Domone, P. L., (2007). “A review of the hardened mechanical properties of self-compacting concrete.” Cement and Concrete Composites, 29(1), 1-12.10.1016/j.cemconcomp.2006.07.010 ↗
11. 11) Elyamany, H. E., Abd Elmoaty, A. E. M. and Elshaboury, A. M., (2018). “Setting time and 7-day strength of geopolymer mortar with various binders.” Construction and Building Materials, 187, 974-983.10.1016/j.conbuildmat.2018.08.025 ↗
12. 12) Fang, G., Ho, W. K., Tu, W. and Zhang, M., (2018). “Workability and mechanical properties of alkali-activated fly ash-slag concrete cured at ambient temperature.” Construction and Building Materials, 172, 476-487.10.1016/j.conbuildmat.2018.04.008 ↗
13. 13) Ghafoor, M. T., Khan, Q. S., Qazi, A. U., Sheikh, M. N. and Hadi, M. N. S., (2021). “Influence of alkaline activators on the mechanical properties of fly ash based geopolymer concrete cured at ambient temperature.” Construction and Building Materials, 273, 121752.10.1016/j.conbuildmat.2020.121752 ↗
14. 14) Gupta, N., Siddique, R. and Belarbi, R., (2021). “Sustainable and Greener Self-Compacting Concrete incorporating Industrial By-Products: A Review.” Journal of Cleaner Production, 284, 124803.10.1016/j.jclepro.2020.124803 ↗
15. 15) Hardjito, D. and Rangan, B. V., (2005). “Development and properties of low-calcium fly ash-based geopolymer concrete (Research report GC 1).” Perth Australia: Curtin University of Technology, Available at: http://www.eopolymer.org/fichiers_pdf/curtin-flyash-GP-concrete-report.pdf.
16. 16) Ishak, S., Lee, H. S., Singh, J. K., Ariffin, M. A. M., Lim, N. H. A. S. and Yang, H. M., (2019). “Performance of fly ash geopolymer concrete incorporating bamboo ash at elevated temperature.” Materials, 12(20), 3404.10.3390/ma12203404 ↗
17. 17) Joshi, B. R., (2020). “Effect of mixing speed and time on fresh properties of cement mortar.” Global Scientific Journal, 8(2), 5106-5115.
18. 18) Leemann, A. and Winnefeld, F., (2007). “The effect of viscosity modifying agents on mortar and concrete.” Cement and Concrete Composites, 29(5), 341-349.10.1016/j.cemconcomp.2007.01.004 ↗
19. 19) Li, Y., Shen, L., Mirmoghtadaei, R. and Ai, L., (2017). “A design of experiment approach to study the effects of raw material on the performance of geopolymer concrete.” Advances in Civil Engineering Materials, 6(1), 526-549.10.1520/ACEM20160007 ↗
20. 20) Mayhoub, O. A., Nasr, E. S. A. R., Ali, Y. and Kohail, M., (2021). “Properties of slag based geopolymer reactive powder concrete.” Ain Shams Engineering Journal, 12(1), 99-105.10.1016/j.asej.2020.08.013 ↗
21. 21) Nematollahi, B. and Sanjayan, J., (2014). “Effect of different superplasticizers and activator combinations on workability and strength of fly ash based geopolymer.” Materials and Design, 57, 667-672.10.1016/j.matdes.2014.01.064 ↗
22. 22) Nepomuceno, M. and Oliveira, L., (2008). “Parameters for self-compacting concrete mortar phase.” In: SP253-21, Fifth ACI/CANMET/IBRACON Int'l Conference on High-Performance Concrete Structure & Materials, American Concrete Institute, 323-340.
23. 23) Nguyen, T. T., Goodier, C. I. and Austin, S. A., (2020). “Factors affecting the slump and strength development of geopolymer concrete.” Construction and Building Materials, 261, 119945.10.1016/j.conbuildmat.2020.119945 ↗
24. 24) Okamura, H. and Ouchi, M., (2003). “Sel-compacting concrete.” Journal of Advanced Concrete Technology, 1(1), 5-15.10.3151/jact.1.5 ↗
25. 25) Okamura, H. and Ozawa, K., (1996). “Self-compacting high performance concrete.” Structural Engineering International, 6(4), 269-270.10.2749/101686696780496292 ↗
26. 26) Parveen, Singhal, D., Junaid, M. T., Jindal, B. B. and Mehta, A., (2018). “Mechanical and microstructural properties of fly ash based geopolymer concrete incorporating alccofine at ambient curing.” Construction and Building Materials, 180, 298-307.10.1016/j.conbuildmat.2018.05.286 ↗
27. 27) Tao, Z. and Pan, Z., (2019). “Geopolymer concrete at ambient and elevated temperatures: Recent developments and challenges.” NED University Journal of ResearchIn, Special Issue on First South Asia Conference on Earthquake Engineering (SACEE'19), NED University Engineering and Technology, 2, 113-128.10.35453/NEDJR-STMECH-2019-0007 ↗