Temperature Dependency of Short-Term Length-Change and Desorption Isotherms of Matured Hardened Cement
Source abstract
Abstract
Short-term length-change isotherms and desorption isotherms of matured hardened cement paste were measured at different temperature conditions, namely, 20, 30, 40, 50, and 60℃. For the short-term length-change isotherms, higher temperature conditions resulted in a smaller drying shrinkage. This trend was largely controlled by the microstructural reorganization of the calcium-silicate-hydrates in the cement paste at elevated temperatures. The experimental results suggest that a portion of the evaporable water did not contribute to the shrinkage. In addition, based on the relation-ships between the incremental strain and the incremental evaporable water content, with a starting relative humidity of 5%, consistent trends were observed for the incremental strain and the incremental evaporable water when the incremental evaporable water content was less than 0.08 g/g-dried hcp. The microstructural reorganization pathways for elevated temperature and/or for drying were confirmed to be identical.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Graduate School of Environmental Studies, Nagoya University, ES-546, Furo-cho, Chikusa-ku, Nagoya, Japan.
References (47)
Show source-provided references
1. 1) Bahafid, S., Ghabezloo, S., Duc, M., Faure, P. and Sulem, J., (2017). “Effect of the hydration temperature on the microstructure of class G cement: C-S-H composition and density.” Cement and Concrete Research, 95, 270-281.10.1016/j.cemconres.2017.02.008 ↗
2. 2) Bahafid, S., Ghabezloo, S., Faure, P., Duc, M. and Sulem, J., (2018). “Effect of the hydration temperature on the pore structure of cement paste: Experimental investigation and micromechanical modelling.” Cement and Concrete Research, 111, 1-14.10.1016/j.cemconres.2018.06.014 ↗
3. 3) Baroghel-Bouny, V., (2007). “Water vapour sorption experiments on hardened cementitious materials: Part I: Essential tool for analysis of hygral behaviour and its relation to pore structure.” Cement and Concrete Research, 37(3), 414-437.10.1016/j.cemconres.2006.11.019 ↗
4. 4) Bažant, Z. P., (1972). “Thermodynamics of hindered adsorption and its implications for hardened cement paste and concrete.” Cement and Concrete Research, 2(1), 1-16.10.1016/0008-8846(72)90019-1 ↗
5. 5) Beltzung, F. and Wittmann, F. H., (2005). “Role of disjoining pressure in cement based materials.” Cement and Concrete Research, 35(12), 2364-2370.10.1016/j.cemconres.2005.04.004 ↗
6. 6) Ben Abdelhamid, M., Mihoubi, D., Sghaier, J. and Bellagi, A., (2016). “Water sorption isotherms and thermodynamic characteristics of hardened cement paste and mortar.” Transport in Porous Media, 113(2), 283-301.10.1007/s11242-016-0694-y ↗
7. 7) Bentur, A., Berger, R. L., Lawrence Jr., F. V., Milestone, N. B., Mindess, S. and Young, J. F., (1979). “Creep and drying shrinkage of calcium silicate pastes III. A hypothesis of irreversible strains.” Cement and Concrete Research, 9(1), 83-95.10.1016/0008-8846(79)90098-X ↗
8. 8) Brue, F., Davy, C. A., Skoczylas, F., Burlion, N. and Bourbon, X., (2012). “Effect of temperature on the water retention properties of two high performance concretes.” Cement and Concrete Research, 42(2), 384-396.10.1016/j.cemconres.2011.11.005 ↗
9. 9) Brunauer, S., Mikhail, R. S. and Bodor, E. E., (1967). “Some remarks about capillary condensation and pore structure analysis.” Journal of Colloid and Interface Science, 25(3), 353-358.10.1016/0021-9797(67)90041-0 ↗
10. 10) De Burgh, J. M. and Foster, S. J., (2017). “Influence of temperature on water vapour sorption isotherms and kinetics of hardened cement paste and concrete.” Cement and Concrete Research, 92, 37-55.10.1016/j.cemconres.2016.11.006 ↗
11. 11) De Burgh, J. M., Foster, S. J. and Valipour, H. R., (2016). “Prediction of water vapour sorption isotherms and microstructure of hardened portland cement pastes.” Cement and Concrete Research, 81, 134-150.10.1016/j.cemconres.2015.11.009 ↗
12. 12) Feldman, R. F., (1968). “Sorption and length-change scanning isotherms of methanol and water on hydrated portland cement.” In: Proceedings of the Fifth international symposium on the chemistry of cement, 1968, Tokyo, Japan. Tokyo: The Cement Association of Japan, 53-66.
13. 13) Gallucci, E., Zhang, X. and Scrivener, K. L., (2013). “Effect of temperature on the microstructure of calcium silicate hydrate (C-S-H).” Cement and Concrete Research, 53, 185-195.10.1016/j.cemconres.2013.06.008 ↗
14. 14) Gartner, E., Maruyama, I. and Chen, J., (2017). “A new model for the C-S-H phase formed during the hydration of portland cements.” Cement and Concrete Research, 97, 95-106.10.1016/j.cemconres.2017.03.001 ↗
15. 15) Gartner, E. M., (1997). “A proposed mechanism for the growth of C-S-H during the hydration of tricalcium silicate.” Cement and Concrete Research, 27(5), 665-672.10.1016/S0008-8846(97)00049-5 ↗
16. 16) Gartner, E. M., Kurtis, K. E. and Monteiro, P. J. M., (2000). “Proposed mechanism of C-S-H growth tested by soft X-ray microscopy.” Cement and Concrete Research, 30(5), 817-822.10.1016/S0008-8846(00)00235-0 ↗
17. 17) Hansen, W., (1987). “Drying shrinkage mechanisms in portland cement paste.” Journal of the American Ceramic Society, 70(5), 323-328.10.1111/j.1151-2916.1987.tb05002.x ↗
18. 18) Helmuth, R. A. and Turk, D. H., (1967). “The reversible and irreversible drying shrinkage of hardened portland cement and tricalcium silicate pastes.” Journal of the PCA Research and Development Laboratories, 9(2), 8 - 21.
19. 19) Hunt, C. M., Tomes L. A. and Blaine, R. L., (1960). “Some effects of aging on the surface area of portland cement paste.” Journal of Research of the National Bureau of Standards, 64A(2), 163-169.10.6028/jres.064A.016 ↗
20. 20) Litvan, G. G. and Myers, R. E., (1983). “Surface area of cement paste conditioned at various relative humidities.” Cement and Concrete Research, 13(1), 49-60.10.1016/0008-8846(83)90127-8 ↗
21. 21) Maruyama, I., (2010). “Origin of drying shrinkage of hardened cement paste: Hydration pressure.” Journal of Advanced Concrete Technology, 8(2), 187-200.10.3151/jact.8.187 ↗
22. 22) Maruyama, I., (2016). “Multi-scale review for possible mechanisms of natural frequency change of reinforced concrete structures under an ordinary drying condition.” Journal of Advanced Concrete Technology, 14(11), 691-705.10.3151/jact.14.691 ↗
23. 23) Maruyama, I., Beppu, K., Kurihara, R. and Furuta, A., (2016a). “Action mechanisms of shrinkage reducing admixture in hardened cement paste.” Journal of Advanced Concrete Technology, 14(6), 311-323.10.3151/jact.14.311 ↗
24. 24) Maruyama, I., Gartner, E., Beppu, K. and Kurihara, R., (2018a). “Role of alcohol-ethylene oxide polymers on the reduction of shrinkage of cement paste.” Cement and Concrete Research, 111, 157-168.10.1016/j.cemconres.2018.05.017 ↗
25. 25) Maruyama, I., Igarashi, G. and Nishioka, Y., (2015). “Bimodal behavior of C-S-H interpreted from short-term length change and water vapor sorption isotherms of hardened cement paste.” Cement and Concrete Research, 73, 158-168.10.1016/j.cemconres.2015.03.010 ↗
26. 26) Maruyama, I. and Kishi, N., (2011). “Drying shrinkage of hardened cement paste under different temperature (in japanese).” Journal of structural and construction engineering, 76(659), 31-36.10.3130/aijs.76.31 ↗
27. 27) Maruyama, I., Nishioka, Y., Igarashi, G. and Matsui, K., (2014). “Microstructural and bulk property changes in hardened cement paste during the first drying process.” Cement and Concrete Research, 58, 20-34.10.1016/j.cemconres.2014.01.007 ↗
28. 28) Maruyama, I., Rymeš, J., Vandamme, M. and Coasne, B., (2018b). “Cavitation of water in hardened cement paste under short-term desorption measurements.” Materials and Structures, 51(6), 159.10.1617/s11527-018-1285-x ↗
29. 29) Maruyama, I., Sakamoto, N., Matsui, K. and Igarashi, G., (2017). “Microstructural changes in white portland cement paste under the first drying process evaluated by waxs, saxs, and usaxs.” Cement and Concrete Research, 91, 24-32.10.1016/j.cemconres.2016.10.002 ↗
30. 30) Muller, A. C. A., Scrivener, K. L., Gajewicz, A. M. and Mcdonald, P. J., (2013a). “Densification of C-S-H measured by 1H NMR relaxometry.” The Journal of Physical Chemistry C, 117(1), 403-412.10.1021/jp3102964 ↗
31. 31) Muller, A. C. A., Scrivener, K. L., Gajewicz, A. M. and Mcdonald, P. J., (2013b). “Use of bench-top NMR to measure the density, composition and desorption isotherm of C-S-H in cement paste.” Microporous and Mesoporous Materials, 178, 99-103.10.1016/j.micromeso.2013.01.032 ↗
32. 32) Numao, T. and Mihashi, H., (1991). “Moisture migration and shrinkage of hardened cement paste at elevated temperatures.” In: H. Shibata Ed. Transactions of the 11th International Conference on Structural Mechanics in Reactor Technology, 18-23 August 1991, Tokyo Japan. Tokyo: Atomic Energy Society of Japan. 37-42.
33. 33) Parrott, L. J., Hansen, W. and Berger, R. L., (1980). “Effect of first drying upon the pore structure of hydrated alite paste.” Cement and Concrete Research, 10(5), 647-655.10.1016/0008-8846(80)90028-9 ↗
34. 34) Parrott, L. J. and Young, J. F., (1981). “Effect of prolonged drying upon the silicate structure of hydrated alite pastes.” Cement and Concrete Research, 11(1), 11-17.10.1016/0008-8846(81)90004-1 ↗
35. 35) Powers, T. C., (1965). “The mechanics of shrinkage and reversible creep of hardened cement paste.” In: A. E. Brooks and K. Newman Eds. Proceedings of the International Conference on the structure of concrete and its behavior under load. London, 1965. 319-343
36. 36) Poyet, S., (2009). “Experimental investigation of the effect of temperature on the first desorption isotherm of concrete.” Cement and Concrete Research, 39(11), 1052-1059.10.1016/j.cemconres.2009.06.019 ↗
37. 37) Poyet, S. and Charles, S., (2009). “Temperature dependence of the sorption isotherms of cement-based materials: Heat of sorption and clausius-clapeyron formula.” Cement and Concrete Research, 39(11), 1060-1067.10.1016/j.cemconres.2009.07.018 ↗
38. 38) Richardson, I., (2014). “Model structures for C-(A)-S-H(I).” Acta Crystallographica Section B, 70(6), 903-923.10.1107/S2052520614021982 ↗
39. 39) Richardson, I. G., (2004). “Tobermorite/jennite- and tobermorite/calcium hydroxide-based models for the structure of c-s-h: Applicability to hardened pastes of tricalcium silicate, β-dicalcium silicate, portland cement, and blends of portland cement with blast-furnace slag, metakaolin, or silica fume.” Cement and Concrete Research, 34(9), 1733-1777.10.1016/j.cemconres.2004.05.034 ↗
40. 40) Richardson, I. G., (2008). “The calcium silicate hydrates.” Cement and Concrete Research, 38(2), 137-158.10.1016/j.cemconres.2007.11.005 ↗
41. 41) Thomas, J. J., Chen, J. J., Jennings, H. M. and Neumann, D. A., (2003). “Ca-OH bonding in the C-S-H gel phase of tricalcium silicate and white portland cement pastes measured by inelastic neutron scattering.” Chemistry of Materials, 15(20), 3813-3817.10.1021/cm034227f ↗
42. 42) Tomes, L. A., Hunt, C. M. and Blaine, R. L., (1957). “Some factors affecting the surface area of hydrated portland cement as determined by water-vapor and nitrogen adsorption.” Journal of Research of the National Bureau of Standards, 59(6), 357-364.10.6028/jres.059.039 ↗
43. 43) Völkl, J. J., Beddoe, R. E. and Setzer, M. J., (1987). “The specific surface of hardened cement paste by small-angle X-ray scattering effect of moisture content and chlorides.” Cement and Concrete Research, 17(1), 81-88.10.1016/0008-8846(87)90062-7 ↗
44. 44) Wittmann, F. H., (1968). “Surface tension skrinkage and strength of hardened cement paste.” Matériaux et Construction, 1(6), 547-552.10.1007/BF02473643 ↗
45. 45) Wyrzykowski, M., Mcdonald, P. J., Scrivener, K. L. and Lura, P., (2017). “Water redistribution within the microstructure of cementitious materials due to temperature changes studied with 1H NMR.” The Journal of Physical Chemistry C, 121(50), 27950-27962.10.1021/acs.jpcc.7b08141 ↗
46. 46) Yang, Y. Z., Li, M. G., Deng, H. W. and Liu, Q., (2014). “Effects of temperature on drying shrinkage of concrete.” Applied Mechanics and Materials, 584-586, 1176-1181.10.4028/www.scientific.net/AMM.584-586.1176 ↗
47. 47) Young, J. F. and Hansen, W., (1986). “Volume relationships for C-S-H formation based on hydration stoichiometries.” MRS Proceedings, 85, 313-322.10.1557/PROC-85-313 ↗