journal article·2011-10-24Open access

Elongation of Plastic Hinges in Ductile RC Members: Model Development

Brian H. H. Peng, Rajesh P. Dhakal, Richard C. Fenwick, Athol J. Carr, Des K. Bull

Abstract

This paper describes the development of an analytical plastic hinge element that can predict flexural, axial, shear and elongation deformation in plastic hinges. The element consists of layers of longitudinal and diagonal springs that represent the behavior of concrete and reinforcement. These springs are modeled using nonlinear path-dependent cyclic stress-strain relationships of either concrete or reinforcing bars depending on their position in the cross section and also depending on the mechanisms they are representing. Through a preliminary scrutiny of the analytical results, in-depth qualitative and quantitative information on the causes and consequences of plastic hinge elongation are discussed. An extensive experimental verification of the plastic hinge element is presented in a companion paper.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Holmes Consulting Group, Wellington, New Zealand.

Department of Civil and Natural Resources Engineering, University of Canterbury, Christchurch, New Zealand.

References (30)

Show source-provided references
1. American Concrete Institute, (2005). “Building code requirements for structural concrete and commentary (ACI 318M-05).” Farmington Hills, MI.
2. Carr, A. J., (2004). “RUAUMOKO2D - Inelastic dynamic analysis.” Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
3. Dhakal R. P. and Fenwick R. C., (2008). “Detailing of plastic hinges in seismic design of concrete structures.” ACI Structural Journal, 105(6), 740-749.
4. Dhakal R. P. and Maekawa, K., (2002a). “Path-dependent cyclic stress-strain relationship of reinforcing bar including buckling.” Engineering Structures, 24(11), 1383-1396.10.1016/S0141-0296(02)00080-9 ↗
5. Dhakal, R. P. and Maekawa, K., (2002b). “Modeling for postyield buckling of reinforcement.” Journal of Structural Engineering, 128(9), 1139-1147.10.1061/(ASCE)0733-9445(2002)128:9(1139) ↗
6. Dhakal, R. P. and Maekawa, K., (2002c). “Reinforcement stability and fracture of cover concrete in reinforced concrete members.” Journal of Structural Engineering, 128(10), 1253-1262.10.1061/(ASCE)0733-9445(2002)128:10(1253) ↗
7. Douglas, K. T., Davidson, B. J. and Fenwick, R.C., (1996). “Modelling reinforced concrete plastic hinges.” Proceedings of the Eleventh World Conference on Earthquake Engineering, Acapulco, Mexico.
8. Fenwick, R. C. and Davidson, B. J., (1993). “Elongation in ductile seismic resistance reinforced concrete frames.” ACI Special Publication SP-157, 143-170.
9. Fenwick, R. C. and Megget, L. M., (1993). “Elongation and load deflection characteristics of reinforced concrete members containing plastic hinges.” Bulletin of the New Zealand National Society for Earthquake Engineering, 26(1), 28-41.10.5459/bnzsee.26.1.28-41 ↗
10. Fenwick, R. C., Tankut A. T. and Thom, C. W., (1981). “The deformation of reinforced concrete beams subjected to inelastic cyclic loading: experimental results.” Research Report, Department of Civil Engineering, University of Auckland, Auckland, New Zealand.
11. Issa, M. S., (1997). “The deformations of reinforced concrete beams containing plastic hinges in the presence of axial compression or tension load.” Master Thesis, Department of Civil Engineering, University of Auckland, Auckland, New Zealand.
12. Kim, J., Stanton, J. and MacRae, G., (2004). “Effect of beam growth on reinforced concrete frames.” Journal of Structural Engineering, 130(9), 1333-1342.10.1061/(ASCE)0733-9445(2004)130:9(1333) ↗
13. Lau, D. B. N., Davidson, B. J. and Fenwick, R. C., (2003). “Seismic performance of RC perimeter frames with slabs containing prestressed units.” Proceedings of the Pacific Conference on Earthquake Engineering, Christchurch, New Zealand.
14. Lee, J. Y. and Watanabe, F., (2003). “Predicting the longitudinal axial strain in the plastic hinge regions of reinforced concrete beams subjected to reversed cyclic loading.” Engineering Structures, 25(7), 927-939.10.1016/S0141-0296(03)00026-9 ↗
15. Liddell, D., Ingham, J. M. and Davidson, B. J., (2000). “Influence of loading history on ultimate displacement of concrete structures.” Research Report, Department of Civil Engineering, University of Auckland, Auckland, New Zealand.
16. Maekawa, K., Pimanmas, A. and Okamura, H., (2003). “Nonlinear Mechanics of Reinforced Concrete.” Spon Press, London, 721 pp.
17. Matthews, J. G., Mander, J. B. and Bull, D. K., (2004). “Prediction of beam elongation in structural concrete members using a rainflow method.” Proceedings of the New Zealand Society of Earthquake Engineering Conference. Rotorua, New Zealand.
18. Matti, N. A., (1998). “Effect of axial loads on the behaviour of reversing plastic hinges in reinforced concrete beams.” Master Thesis, Department of Civil Engineering, University of Auckland, Auckland, New Zealand.
19. Okamura, H. and Maekawa, K., (1991). “Nonlinear analysis and constitutive models of reinforced concrete.” Gihodo Publication, Tokyo, Japan.
20. Pang, X. B. and Hsu, T. T. C., (1995). “Behavior of reinforced concrete membrane elements in shear.” ACI Structural Journal, 92(6), 665-679.
21. Pang, X. B. and Hsu, T .T. C., (1996). “Fixed angle softened truss model for reinforced concrete.” ACI Structural Journal, 93(2), 197-207.
22. Paulay, T. and Priestley, M. J. N., (1992). “Seismic design of reinforced concrete and masonry buildings.” Wiley, New York, 744 pp.
23. Peng, B. H. H. (2009). “Seismic performance assessment of reinforced concrete buildings with precast concrete floor systems” http://hdl.handle.net/10092/3103, PhD Thesis, Department of Civil and Natural Resources Engineering, University of Canterbury, Christchurch, New Zealand.
24. Peng, B. H. H., Dhakal, R. P., Fenwick, R. C., Carr, A. J. and Bull, D. K., (2011). “Elongation of plastic hinges in ductile RC members: model verification.” Journal of Advanced Concrete Technology, 9(3), 327-338.10.3151/jact.9.327 ↗
25. Schlaich, J., Schaefer, K. and Jennewein, M., (1987). “Toward a consistent design of structural concrete.” PCI Journal, 32(3), 74-150.10.15554/pcij.05011987.74.150 ↗
26. Shima, H., Chou, L. and Okamura, H., (1987). “Micro and macro models for bond behaviour in reinforced concrete.” Journal of Faculty of Engineering, University of Tokyo, Tokyo, Japan, 39(2), 133-194.
27. Standards New Zealand. (2006). “Concrete Structures Standard: NZS 3101:2006.” Wellington, New Zealand.
28. To, N. H. T., Ingham, J. M. and Sritharan, S., (2001). “Monotonic non-linear analysis of reinforced concrete knee joints using strut-and-tie computer models.” Bulletin of the New Zealand Society for Earthquake Engineering, 34(3), 169-190.10.5459/bnzsee.34.3.169-190 ↗
29. Vecchio, F. J. and Collins, M. P., (1986). “Modified compression-field theory for reinforced concrete elements subjected to shear.” Journal of the American Concrete Institute, 83(2), 219-231.
30. Walker, A. and Dhakal, R. P., (2009). “Assessment of material strain limits for defining plastic regions in concrete structures.” Bulletin of the New Zealand Society of Earthquake Engineering, 42(2), 86-95.10.5459/bnzsee.42.2.86-95 ↗