journal article·2021-12Open access

Significant strain-rate dependence of sensing behavior in TiO2@carbon fibre/PDMS composites for flexible strain sensors

Fan Zhang, Hailong Hu, Simin Hu, Jianling Yue

Journal of Advanced Ceramics· Volume 10· Issue 6

Abstract

Abstract Carbon fibre (CF) embedded into elastomeric media has been attracting incredible interest as flexible strain sensors in the application of skin electronics owing to their high sensitivity in a very small strain gauge. To further improve the sensitivity of CF/PDMS composite strain sensor, the relatively low temperature prepared TiO2 nanowire via hydrothermal route was employed herein to functionalize CF. The results showed a significant increase in the sensitivity of the TiO2@CF/PDMS composite strain sensors which was reflected by the calculated gauge factor. As the prepared TiO2 nanowire vertically embraced the surroundings of the CF, the introduced TiO2 nanowire contributed to a highly porous structure which played a predominant role in improving the sensitivity of strain sensors. Moreover, the significant strain rate dependent behavior of TiO2@CF/PDMS strain sensor was revealed when performing monotonic tests at varied strain rate. Therefore, introducing TiO2 nanowire on CF offers a new technique for fabricating flexible strain sensors with improved sensitivity for the application of flexible electronics.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Smart Materials for Construction · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Liao XQ, Liao QL, Yan XQ, et al. Flexible and highly sensitive strain sensors fabricated by pencil drawn for wearable monitor. Adv Funct Mater 2015, 25: 2395–2401.10.1002/adfm.201500094 ↗
2. Zhong JW, Zhong QZ, Hu QY, et al. Stretchable self-powered fiber-based strain sensor. Adv Funct Mater 2015, 25: 1798–1803.10.1002/adfm.201404087 ↗
3. Li LH, Xiang HY, Xiong Y, et al. Ultrastretchable fiber sensor with high sensitivity in whole workable range for wearable electronics and implantable medicine. Adv Sci 2018, 5: 1800558.10.1002/advs.201800558 ↗
4. Li XT, Hu HB, Hua T, et al. Wearable strain sensing textile based on one-dimensional stretchable and weavable yarn sensors. Nano Res 2018, 11: 5799–5811.10.1007/s12274-018-2043-7 ↗
5. Heo JS, Eom J, Kim YH, et al. Recent progress of textile-based wearable electronics: A comprehensive review of materials, devices, and applications. Small 2018, 14: 1703034.10.1002/smll.201703034 ↗
6. Atalay O, Atalay A, Gafford J, et al. A highly stretchable capacitive-based strain sensor based on metal deposition and laser rastering. Adv Mater Technol 2017, 2: 1700081.10.1002/admt.201700081 ↗
7. Liao XQ, Wang WS, Wang L, et al. Controllably enhancing stretchability of highly sensitive fiber-based strain sensors for intelligent monitoring. ACS Appl Mater Interfaces 2019, 11: 2431–2440.10.1021/acsami.8b20245 ↗
8. Liu P, Pan WD, Liu Y, et al. Fully flexible strain sensor from core-spun elastic threads with integrated electrode and sensing cell based on conductive nanocomposite. Compos Sci Technol 2018, 159: 42–49.10.1016/j.compscitech.2018.02.034 ↗
9. Montazerian H, Rashidi A, Milani AS, et al. Integrated sensors in advanced composites: A critical review. Crit Rev Solid State Mater Sci 2020, 45: 187–238.10.1080/10408436.2019.1588705 ↗
10. Yu SL, Wang XP, Xiang HX, et al. Superior piezoresistive strain sensing behaviors of carbon nanotubes in one-dimensional polymer fiber structure. Carbon 2018, 140: 1–9.10.1016/j.carbon.2018.08.028 ↗
11. Liu ZY, Qi DP, Hu GY, et al. Surface strain redistribution on structured microfibers to enhance sensitivity of fiber-shaped stretchable strain sensors. Adv Mater 2018, 30: 1704229.10.1002/adma.201704229 ↗
12. Zhou J, Xu XZ, Xin YY, et al. Coaxial thermoplastic elastomer-wrapped carbon nanotube fibers for deformable and wearable strain sensors. Adv Funct Mater 2018, 28: 1705591.10.1002/adfm.201705591 ↗
13. Huang T, He P, Wang RR, et al. Porous fibers composed of polymer nanoball decorated graphene for wearable and highly sensitive strain sensors. Adv Funct Mater 2019, 29: 1903732.10.1002/adfm.201903732 ↗
14. Ryu J, Kim J, Oh J, et al. Intrinsically stretchable multifunctional fiber with energy harvesting and strain sensing capability. Nano Energy 2019, 55: 348–353.10.1016/j.nanoen.2018.10.071 ↗
15. Jang Y, Kim SM, Spinks GM, et al. Carbon nanotube yarn for fiber-shaped electrical sensors, actuators, and energy storage for smart systems. Adv Mater 2020, 32: 1902670.10.1002/adma.201902670 ↗
16. Kapoor A, McKnight M, Chatterjee K, et al. Toward fully manufacturable, fiber assembly-based concurrent multimodal and multifunctional sensors for e-textiles. Adv Mater Technol 2019, 4: 1800281.10.1002/admt.201800281 ↗
17. Yan T, Zhou H, Niu HT, et al. Highly sensitive detection of subtle movement using a flexible strain sensor from helically wrapped carbon yarns. J Mater Chem C 2019, 7: 10049–10058.10.1039/C9TC03065D ↗
18. Trung TQ, Le HS, Dang TML, et al. Freestanding, fiber-based, wearable temperature sensor with tunable thermal index for healthcare monitoring. Adv Healthc Mater 2018, 7: 1800074.10.1002/adhm.201800074 ↗
19. Luo JC, Gao SJ, Luo H, et al. Superhydrophobic and breathable smart MXene-based textile for multifunctional wearable sensing electronics. Chem Eng J 2021, 406: 126898.10.1016/j.cej.2020.126898 ↗
20. Lin LW, Wang L, Li B, et al. Dual conductive network enabled superhydrophobic and high performance strain sensors with outstanding electro-thermal performance and extremely high gauge factors. Chem Eng J 2020, 385: 123391.10.1016/j.cej.2019.123391 ↗
21. Nguyen NT, Ozkan S, Hwang I, et al. Spaced TiO2 nanotube arrays allow for a high performance hierarchical supercapacitor structure. J Mater Chem A 2017, 5: 1895–1901.10.1039/C6TA10179H ↗
22. Liao Q, Mohr M, Zhang X, et al. Carbon fiber-ZnO nanowire hybrid structures for flexible and adaptable strain sensors. Nanoscale 2013, 5: 12350–12355.10.1039/c3nr03536k ↗
23. Hu SM, Yue JL, Jiang C, et al. Resistive switching behavior and mechanism in flexible TiO2@Cf memristor crossbars. Ceram Int 2019, 45: 10182–10186.10.1016/j.ceramint.2019.02.068 ↗
24. Jia YY, Yue XY, Wang YL, et al. Multifunctional stretchable strain sensor based on polydopamine/reduced graphene oxide/electrospun thermoplastic polyurethane fibrous mats for human motion detection and environment monitoring. Compos B: Eng 2020, 183: 107696.10.1016/j.compositesb.2019.107696 ↗
25. Zhu PY, Xie XB, Sun XP, et al. Distributed modular temperature-strain sensor based on optical fiber embedded in laminated composites. Compos B: Eng 2019, 168: 267–273.10.1016/j.compositesb.2018.12.078 ↗
26. Lau KT, Hung PY, Zhu MH, et al. Properties of natural fibre composites for structural engineering applications. ComposB: Eng 2018, 136: 222–233.
27. Kwon DJ, Shin PS, Kim JH, et al. Detection of damage in cylindrical parts of carbon fiber/epoxy composites using electrical resistance (ER) measurements. Compos B: Eng 2016, 99: 528–532.10.1016/j.compositesb.2016.06.050 ↗
28. Wu SY, Peng SH, Wang CH. Stretchable strain sensors based on PDMS composites with cellulose sponges containing one- and two-dimensional nanocarbons. Sens Actuat A: Phys 2018, 279: 90–100.10.1016/j.sna.2018.06.002 ↗
29. Ma ZH, Xu R, Wang W, et al. A wearable, anti-bacterial strain sensor prepared by silver plated cotton/spandex blended fabric for human motion monitoring. Colloids Surf A: Physicochem Eng Asp 2019, 582: 123918.10.1016/j.colsurfa.2019.123918 ↗
30. Wang L, Chen Y, Lin LW, et al. Highly stretchable, anti-corrosive and wearable strain sensors based on the PDMS/CNTs decorated elastomer nanofiber composite. Chem Eng J 2019, 362: 89–98.10.1016/j.cej.2019.01.014 ↗
31. Guo DJ, Pan XD, He H. A simple and cost-effective method for improving the sensitivity of flexible strain sensors based on conductive polymer composites. Sens Actuat A Phys 2019, 298: 111608.10.1016/j.sna.2019.111608 ↗
32. Häntzsche E, Matthes A, Nocke A, et al. Characteristics of carbon fiber based strain sensors for structural-health monitoring of textile-reinforced thermoplastic composites depending on the textile technological integration process. Sens Actuat A Phys 2013, 203: 189–203.10.1016/j.sna.2013.08.045 ↗
33. Yang YN, Cao ZR, He P, et al. Ti3C2Tx MXene-graphene composite films for wearable strain sensors featured with high sensitivity and large range of linear response. Nano Energy 2019, 66: 104134.10.1016/j.nanoen.2019.104134 ↗
34. Min S, Asrulnizam AM, Atsunori M, et al. Properties of stretchable and flexible strain sensor based on silver/PDMS nanocomposites. Mater Today 2019, 17: 616–622.
35. Anderson N, Szorc N, Gunasekaran V, et al. Highly sensitive screen printed strain sensors on flexible substrates via ink composition optimization. Sens Actuat A Phys 2019, 290: 1–7.10.1016/j.sna.2019.02.028 ↗
36. Gao ZJ, Li YF, Shang XL, et al. Bio-inspired adhesive and self-healing hydrogels as flexible strain sensors for monitoring human activities. Mater Sci Eng C 2020, 106: 110168.10.1016/j.msec.2019.110168 ↗
37. Huang JY, Li DW, Zhao M, et al. Flexible electrically conductive biomass-based aerogels for piezoresistive pressure/strain sensors. J Chem Eng 2019, 373: 1357–1366.10.1016/j.cej.2019.05.136 ↗
38. Zhu P, Zhao ZM, Nie JH, et al. Ultra-high sensitivity strain sensor based on piezotronic bipolar transistor. Nano Energy 2018, 50: 744–749.10.1016/j.nanoen.2018.06.035 ↗
39. Lu ST, Chen DS, Liu C, et al. A 3-D finger motion measurement system via soft strain sensors for hand rehabilitation. Sens Actuat A Phys 2019, 285: 700–711.10.1016/j.sna.2018.12.004 ↗
40. Liu Y, Shi XL, Liu SR, et al. Biomimetic printable nanocomposite for healable, ultrasensitive, stretchable and ultradurable strain sensor. Nano Energy 2019, 63: 103898.10.1016/j.nanoen.2019.103898 ↗
41. Ma LF, Yang W, Wang YS, et al. Multi-dimensional strain sensor based on carbon nanotube film with aligned conductive networks. Compos Sci Technol 2018, 165: 190–197.10.1016/j.compscitech.2018.06.030 ↗
42. Bessonov A, Kirikova M, Haque S, et al. Highly reproducible printable graphite strain gauges for flexible devices. Sens Actuat A Phys 2014, 206: 75–80.10.1016/j.sna.2013.11.034 ↗
43. Qiu AD, Li PL, Yang ZK, et al. A path beyond metal and silicon: Polymer/nanomaterial composites for stretchable strain sensors. Adv Funct Mater 2019, 29: 1806306.10.1002/adfm.201806306 ↗
44. Zhang F, Wu SY, Peng SH, et al. The effect of dual-scale carbon fibre network on sensitivity and stretchability of wearable sensors. Compos Sci Technol 2018, 165: 131–139.10.1016/j.compscitech.2018.06.019 ↗
45. Song HL, Zhang JQ, Chen DB, et al. Superfast and high-sensitivity printable strain sensors with bioinspired micron-scale cracks. Nanoscale 2017, 9: 1166–1173.10.1039/C6NR07333F ↗
46. Amjadi M, Turan M, Clementson CP, et al. Parallel microcracks-based ultrasensitive and highly stretchable strain sensors. ACS Appl Mater Interfaces 2016, 8: 5618–5626.10.1021/acsami.5b12588 ↗
47. Gao Y, Fang X, Tan J, et al. Highly sensitive strain sensors based on fragmentized carbon nanotube/polydimethylsiloxane composites. Nanotechnology 2018, 29: 235501.10.1088/1361-6528/aab888 ↗
48. Shi XL, Liu SR, Sun Y, et al. Lowering internal friction of 0D-1D-2D ternary nanocomposite-based strain sensor by fullerene to boost the sensing performance. Adv Funct Mater 2018, 28: 1800850.10.1002/adfm.201800850 ↗
49. Liu H, Li YL, Dai K, et al. Electrically conductive thermoplastic elastomer nanocomposites at ultralow graphene loading levels for strain sensor applications. J Mater Chem C 2016, 4: 157–166.10.1039/C5TC02751A ↗
50. Sato J, Sekine T, Wang YF, et al. Ferroelectric polymer-based fully printed flexible strain rate sensors and their application for human motion capture. Sens Actuat A Phys 2019, 295: 93–98.10.1016/j.sna.2019.05.022 ↗
51. Li YH, Zhou B, Zheng GQ, et al. Continuously prepared highly conductive and stretchable SWNT/MWNT synergistically composited electrospun thermoplastic polyurethane yarns for wearable sensing. J Mater Chem C 2018, 6: 2258–2269.10.1039/C7TC04959E ↗
52. Lin Y, Dong X, Liu S, et al. Graphene-elastomer composites with segregated nanostructured network for liquid and strain sensing application. ACS Appl Mater Interfaces 2016, 8: 24143–24151.10.1021/acsami.6b08587 ↗
53. Moriche R, Jiménez-Suàrez A, Sanchez M, et al. Sensitivity, influence of the strain rate and reversibility of GNPs based multiscale composite materials for high sensitive strain sensors. Compos Sci Technol 2018, 155: 100–107.10.1016/j.compscitech.2017.12.002 ↗
54. Qin Y, Peng Q, Ding Y, et al. Lightweight, superelastic, and mechanically flexible graphene/polyimide nanocomposite foam for strain sensor application. ACS Nano 2015, 9: 8933–8941.10.1021/acsnano.5b02781 ↗
55. Li YQ, Zhu WB, Yu XG, et al. Multifunctional wearable device based on flexible and conductive carbon sponge/polydimethylsiloxane composite. ACS Appl Mater Interfaces 2016, 8: 33189–33196.10.1021/acsami.6b11196 ↗
56. Li YQ, Samad YA, Taha T, et al. Highly flexible strain sensor from tissue paper for wearable electronics. ACS Sustain Chem Eng 2016, 4: 4288–4295.10.1021/acssuschemeng.6b00783 ↗