Advances in 3D printing of magnetic materials: Fabrication, properties, and their applications
Source abstract
Abstract
Abstract Magnetic materials are of increasing importance for many essential applications due to their unique magnetic properties. However, due to the limited fabrication ability, magnetic materials are restricted by simple geometric shapes. Three-dimensional (3D) printing is a highly versatile technique that can be utilized for constructing magnetic materials. The shape flexibility of magnets unleashes opportunities for magnetic composites with reducing post-manufacturing costs, motivating the review on 3D printing of magnetic materials. This paper focuses on recent achievements of magnetic materials using 3D printing technologies, followed by the characterization of their magnetic properties, which are further enhanced by modification. Interestingly, the corresponding properties depend on the intrinsic nature of starting materials, 3D printing processing parameters, and the optimized structural design. More emphasis is placed on the functional applications of 3D-printed magnetic materials in different fields. Lastly, the current challenges and future opportunities are also addressed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Advanced Materials and Mechanics · Micro and Nano Robotics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Gutfleisch O, Willard MA, Brück E, et al. Magnetic materials and devices for the 21st century: Stronger, lighter, and more energy efficient. Adv Mater 2011, 23: 821–842.10.1002/adma.201002180 ↗
2. Zhao WL, Lipo TA, Kwon BI. Comparative study on novel dual stator radial flux and axial flux permanent magnet motors with ferrite magnets for traction application. IEEE Trans Magn 2014, 50: 8104404.
3. Jang SM, Seo HJ, Park YS, et al. Design and electromagnetic field characteristic analysis of 1.5 kW small scale wind power generator for substitution of Nd−Fe−B to ferrite permanent magnet. IEEE Trans Magn 2012, 48: 2933–2936.10.1109/TMAG.2012.2203111 ↗
4. Jian G, Zhou DX, Yang JY, et al. Tape casting of cobalt ferrite from nonaqueous slurry. J Magn Magn Mater 2012, 324: 4179–4183.10.1016/j.jmmm.2012.07.042 ↗
5. Jantunen H, Hu T, Uusimäki A, et al. Tape casting of ferroelectric, dielectric, piezoelectric and ferromagnetic materials. J Eur Ceram Soc 2004, 24: 1077–1081.10.1016/S0955-2219(03)00552-1 ↗
6. Tseng TY, Lin JC. Microstructure and properties of Ni−Zn ferrites sintered from slip cast colloidally precipitated particles. IEEE Trans Magn 1989, 25: 4405–4408.10.1109/20.45319 ↗
7. Murillo N, González J, Guraya C, et al. Structural and magnetic properties of sintered Sr-ferrites fabricated by powder injection molding. J Magn Magn Mater 1999, 203: 165–168.10.1016/S0304-8853(99)00251-6 ↗
8. Ye Y, Qiao L, Zheng JW, et al. Effect of microcrystalline wax on the solvent debinding of the Sr-ferrite ceramics prepared by powder injection molding. J Eur Ceram Soc 2017, 37: 2105–2114.10.1016/j.jeurceramsoc.2016.12.026 ↗
9. Gutiérrez-López J, Rodriguez-Senín E, Pastor JY, et al. Microstructure, magnetic and mechanical properties of Ni-Zn ferrites prepared by powder injection moulding. Powder Technol 2011, 210: 29–35.10.1016/j.powtec.2011.02.008 ↗
10. Saura-Múzquiz M, Granados-Miralles C, Stingaciu M, et al. Improved performance of SrFe12O19 bulk magnets through bottom-up nanostructuring. Nanoscale 2016, 8: 2857–2866.10.1039/C5NR07854G ↗
11. Stingaciu M, Topole M, McGuiness P, et al. Magnetic properties of ball-milled SrFe12O19 particles consolidated by spark-plasma sintering. Sci Rep 2015, 5: 14112.10.1038/srep14112 ↗
12. Eikeland AZ, Stingaciu M, Granados-Miralles C, et al. Enhancement of magnetic properties by spark plasma sintering of hydrothermally synthesised SrFe12O19. CrystEngComm 2017, 19: 1400–1407.10.1039/C6CE02275H ↗
13. Bollero A, Rial J, Villanueva M, et al. Recycling of strontium ferrite waste in a permanent magnet manufacturing plant. ACS Sustain Chem Eng 2017, 5: 3243–3249.10.1021/acssuschemeng.6b03053 ↗
14. Stansbury JW, Idacavage MJ. 3D printing with polymers: Challenges among expanding options and opportunities. Dent Mater 2016, 32: 54–64.10.1016/j.dental.2015.09.018 ↗
15. Yuk HW, Lu BY, Lin S, et al. 3D printing of conducting polymers. Nat Commun 2020, 11: 1604.10.1038/s41467-020-15316-7 ↗
16. Su XR, Li XW, Ong CYA, et al. Metallization of 3D printed polymers and their application as a fully functional water-splitting system. Adv Sci: Weinh 2019, 6: 1801670.10.1002/advs.201801670 ↗
17. Mao YQ, Yu K, Isakov MS, et al. Sequential self-folding structures by 3D printed digital shape memory polymers. Sci Rep 2015, 5: 13616.10.1038/srep13616 ↗
18. Yamada A, Niikura F, Ikuta K. A three-dimensional microfabrication system for biodegradable polymers with high resolution and biocompatibility. J Micromech Microeng 2008, 18: 025035.10.1088/0960-1317/18/2/025035 ↗
19. Huang XL, Chang S, Lee WSV, et al. Three-dimensional printed cellular stainless steel as a high-activity catalytic electrode for oxygen evolution. J Mater Chem A 2017, 5: 18176–18182.10.1039/C7TA03023A ↗
20. Xie FX, He XB, Cao SL, et al. Structural and mechanical characteristics of porous 316L stainless steel fabricated by indirect selective laser sintering. J Mater Process Technol 2013, 213: 838–843.10.1016/j.jmatprotec.2012.12.014 ↗
21. Jakus AE, Taylor SL, Geisendorfer NR, et al. Metallic architectures from 3D-printed powder-based liquid inks. Adv Funct Mater 2015, 25: 6985–6995.10.1002/adfm.201503921 ↗
22. Noguera R, Lejeune M, Chartier T. 3D fine scale ceramic components formed by ink-jet prototyping process. J Eur Ceram Soc 2005, 25: 2055–2059.10.1016/j.jeurceramsoc.2005.03.223 ↗
23. Chen ZW, Li ZY, Li JJ, et al. 3D printing of ceramics: A review. J Eur Ceram Soc 2019, 39: 661–687.10.1016/j.jeurceramsoc.2018.11.013 ↗
24. Cheng J, Chen Y, Wu JW, et al. 3D printing of BaTiO3 piezoelectric ceramics for a focused ultrasonic array. Sensors 2019, 19: 4078.10.3390/s19194078 ↗
25. Wei XX, Liu YH, Zhao DJ, et al. 3D printing of piezoelectric barium titanate with high density from milled powders. J Eur Ceram Soc 2020, 40: 5423–5430.10.1016/j.jeurceramsoc.2020.06.021 ↗
26. Wei XX, Nagarajan RS, Peng E, et al. Fabrication of YBa2Cu3O7−x (YBCO) superconductor bulk structures by extrusion freeforming. Ceram Int 2016, 42: 15836–15842.10.1016/j.ceramint.2016.07.052 ↗
27. Peng E, Wei XX, Garbe U, et al. Robocasting of dense yttria-stabilized zirconia structures. J Mater Sci 2018, 53: 247–273.10.1007/s10853-017-1491-x ↗
28. Lakhdar Y, Tuck C, Binner J, et al. Additive manufacturing of advanced ceramic materials. Prog Mater Sci 2021, 116: 100736.10.1016/j.pmatsci.2020.100736 ↗
29. He RJ, Zhou NP, Zhang KQ, et al. Progress and challenges towards additive manufacturing of SiC ceramic. J Adv Ceram 2021, 10: 637–674.10.1007/s40145-021-0484-z ↗
30. Farahani RD, Dubé M, Therriault D. Three-dimensional printing of multifunctional nanocomposites: Manufacturing techniques and applications. Adv Mater 2016, 28: 5794–5821.10.1002/adma.201506215 ↗
31. Valino AD, Dizon JRC, Espera Jr AH, et al. Advances in 3D printing of thermoplastic polymer composites and nanocomposites. Prog Polym Sci 2019, 98: 101162.10.1016/j.progpolymsci.2019.101162 ↗
32. Wang X, Jiang M, Zhou ZW, et al. 3D printing of polymer matrix composites: A review and prospective. Compos B Eng 2017, 110: 442–458.10.1016/j.compositesb.2016.11.034 ↗
33. Kim K, Zhu W, Qu X, et al. 3D optical printing of piezoelectric nanoparticle-polymer composite materials. ACS Nano 2014, 8: 9799–9806.10.1021/nn503268f ↗
34. Dermanaki Farahani R, Dubé M. Printing polymer nanocomposites and composites in three dimensions. Adv Eng Mater 2018, 20: 1700539.10.1002/adem.201700539 ↗
35. Zhang X, Yao JH, Liu B, et al. Three-dimensional high-entropy alloy-polymer composite nanolattices that overcome the strength-recoverability trade-off. Nano Lett 2018, 18: 4247–4256.10.1021/acs.nanolett.8b01241 ↗
36. Kim Y, Yuk H, Zhao R, et al. Printing ferromagnetic domains for untethered fast-transforming soft materials. Nature 2018, 558: 274–279.10.1038/s41586-018-0185-0 ↗
37. Guo SZ, Qiu KY, Meng FB, et al. 3D printed stretchable tactile sensors. Adv Mater 2017, 29: 1701218.10.1002/adma.201701218 ↗
38. Zhao JX, Zhang Y, Huang YN, et al. 3D printing fiber electrodes for an all-fiber integrated electronic device via hybridization of an asymmetric supercapacitor and a temperature sensor. Adv Sci: Weinh 2018, 5: 1801114.10.1002/advs.201801114 ↗
39. Sun K, Wei TS, Ahn BY, et al. 3D printing of interdigitated Li-ion microbattery architectures. Adv Mater 2013, 25: 4539–4543.10.1002/adma.201301036 ↗
40. McOwen DW, Xu SM, Gong YH, et al. 3D-printing electrolytes for solid-state batteries. Adv Mater 2018, 30: 1707132.10.1002/adma.201707132 ↗
41. Park J, Kim JK, Kim DS, et al. Wireless pressure sensor integrated with a 3D printed polymer stent for smart health monitoring. Sens Actuat B Chem 2019, 280: 201–209.10.1016/j.snb.2018.10.006 ↗
42. Gul JZ, Sajid M, Rehman MM, et al. 3D printing for soft robotics—A review. Sci Technol Adv Mater 2018, 19: 243–262.10.1080/14686996.2018.1431862 ↗
43. Bartlett NW, Tolley MT, Overvelde JTB, et al. A 3D-printed, functionally graded soft robot powered by combustion. Science 2015, 349: 161–165.10.1126/science.aab0129 ↗
44. Wallin TJ, Pikul J, Shepherd RF. 3D printing of soft robotic systems. Nat Rev Mater 2018, 3: 84–100.10.1038/s41578-018-0002-2 ↗
45. Neufurth M, Wang XH, Wang SF, et al. 3D printing of hybrid biomaterials for bone tissue engineering: Calcium-polyphosphate microparticles encapsulated by polycaprolactone. Acta Biomater 2017, 64: 377–388.10.1016/j.actbio.2017.09.031 ↗
46. Melchels FPW, Feijen J, Grijpma DW. A review on stereolithography and its applications in biomedical engineering. Biomaterials 2010, 31: 6121–6130.10.1016/j.biomaterials.2010.04.050 ↗
47. Hwang HH, Zhu W, Victorine G, et al. 3D-printing of functional biomedical microdevices via light- and extrusion-based approaches. Small Methods 2018, 2: 1700277.10.1002/smtd.201700277 ↗
48. Beg S, Almalki WH, Malik A, et al. 3D printing for drug delivery and biomedical applications. Drug Discov Today 2020, 25: 1668–1681.10.1016/j.drudis.2020.07.007 ↗
49. Li HH, Yin YX, Xiang Y, et al. A novel 3D printing PCL/GelMA scaffold containing USPIO for MRI-guided bile duct repair. Biomed Mater 2020, 15: 045004.10.1088/1748-605X/ab797a ↗
50. Wei XX, Sugumaran PJ, Peng E, et al. Low-field dynamic magnetic separation by self-fabricated magnetic meshes for efficient heavy metal removal. ACS Appl Mater Interfaces 2017, 9: 36772–36782.10.1021/acsami.7b10549 ↗
51. Tian XC, Jin J, Yuan SQ, et al. Emerging 3D-printed electrochemical energy storage devices: A critical review. Adv Energy Mater 2017, 7: 1700127.10.1002/aenm.201700127 ↗
52. Qiao HY, Zhang Y, Huang ZG, et al. 3D printing individualized triboelectric nanogenerator with macro-pattern. Nano Energy 2018, 50: 126–132.10.1016/j.nanoen.2018.04.071 ↗
53. Li R, Yuan SQ, Zhang W, et al. 3D printing of mixed matrix films based on metal-organic frameworks and thermoplastic polyamide 12 by selective laser sintering for water applications. ACS Appl Mater Interfaces 2019, 11: 40564–40574.10.1021/acsami.9b11840 ↗
54. Du R, Zhao QC, Zheng Z, et al. 3D self-supporting porous magnetic assemblies for water remediation and beyond. Adv Energy Mater 2016, 6: 1600473.10.1002/aenm.201600473 ↗
55. Ruiz-Morales JC, Tarancón A, Canales-Vázquez J, et al. Three dimensional printing of components and functional devices for energy and environmental applications. Energy Environ Sci 2017, 10: 846–859.10.1039/C6EE03526D ↗
56. Lantean S, Barrera G, Pirri CF, et al. 3D printing of magnetoresponsive polymeric materials with tunable mechanical and magnetic properties by digital light processing. Adv Mater Technol 2019, 4: 1900505.10.1002/admt.201900505 ↗
57. Huber C, Abert C, Bruckner F, et al. 3D print of polymer bonded rare-earth magnets, and 3D magnetic field scanning with an end-user 3D printer. Appl Phys Lett 2016, 109: 162401.10.1063/1.4964856 ↗
58. Yang F, Zhang XY, Guo ZM, et al. 3D printing of NdFeB bonded magnets with SrFe12O19 addition. J Alloys Compd 2019, 779: 900–907.10.1016/j.jallcom.2018.11.335 ↗
59. Sonnleitner K, Huber C, Teliban I, et al. 3D printing of polymer-bonded anisotropic magnets in an external magnetic field and by a modified production process. Appl Phys Lett 2020, 116: 092403.10.1063/1.5142692 ↗
60. Zhang JH, Zhao SC, Zhu M, et al. 3D-printed magnetic Fe3O4/MBG/PCL composite scaffolds with multifunctionality of bone regeneration, local anticancer drug delivery and hyperthermia. J Mater Chem B 2014, 2: 7583–7595.10.1039/C4TB01063A ↗
61. Domingo-Roca R, Jackson JC, Windmill JFC. 3D-printing polymer-based permanent magnets. Mater Des 2018, 153: 120–128.10.1016/j.matdes.2018.05.005 ↗
62. Zhu PF, Yang WY, Wang R, et al. 4D printing of complex structures with a fast response time to magnetic stimulus. ACS Appl Mater Interfaces 2018, 10: 36435–36442.10.1021/acsami.8b12853 ↗
63. Li L, Tirado A, Nlebedim IC, et al. Big area additive manufacturing of high performance bonded NdFeB magnets. Sci Rep 2016, 6: 36212.10.1038/srep36212 ↗
64. Paranthaman MP, Shafer CS, Elliott AM, et al. Binder jetting: A novel NdFeB bonded magnet fabrication process. JOM 2016, 68: 1978–1982.10.1007/s11837-016-1883-4 ↗
65. Martin JJ, Fiore BE, Erb RM. Designing bioinspired composite reinforcement architectures via 3D magnetic printing. Nat Commun 2015, 6: 8641.10.1038/ncomms9641 ↗
66. Martin JJ, Caunter A, Dendulk A, et al. Direct-write 3D printing of composite materials with magnetically aligned discontinuous reinforcement. In: Proceedings of the Proc SPIE 10194, Micro- and Nanotechnology Sensors, Systems, and Applications IX, Anaheim, USA, 2017, 10194: 258–271.10.1117/12.2263215 ↗
67. Bastola AK, Paudel M, Li L. Dot-patterned hybrid magnetorheological elastomer developed by 3D printing. J Magn Magn Mater 2020, 494: 165825.10.1016/j.jmmm.2019.165825 ↗
68. Wei XX, Liu YH, Zhao DJ, et al. Net-shaped barium and strontium ferrites by 3D printing with enhanced magnetic performance from milled powders. J Magn Magn Mater 2020, 493: 165664.10.1016/j.jmmm.2019.165664 ↗
69. Shao GB, Ware HOT, Li LQ, et al. Rapid 3D printing magnetically active microstructures with high solid loading. Adv Eng Mater 2020, 22: 1900911.10.1002/adem.201900911 ↗
70. Hodaei A, Akhlaghi O, Khani N, et al. Single additive enables 3D printing of highly loaded iron oxide suspensions. ACS Appl Mater Interfaces 2018, 10: 9873–9881.10.1021/acsami.8b00551 ↗
71. Hassan RU, Jo SW, Seok JW. Fabrication of a functionally graded and magnetically responsive shape memory polymer using a 3D printing technique and its characterization. J Appl Polym Sci 2018, 135: 45997.10.1002/app.45997 ↗
72. Popov V, Koptyug A, Radulov I, et al. Prospects of additive manufacturing of rare-earth and non-rare-earth permanent magnets. Procedia Manuf 2018, 21: 100–108.10.1016/j.promfg.2018.02.199 ↗
73. Li L, Post B, Kunc V, et al. Additive manufacturing of near-net-shape bonded magnets: Prospects and challenges. Scripta Mater 2017, 135: 100–104.10.1016/j.scriptamat.2016.12.035 ↗
74. Périgo EA, Jacimovic J, García Ferré F, et al. Additive manufacturing of magnetic materials. Addit Manuf 2019, 30: 100870.
75. Chaudhary V, Mantri SA, Ramanujan RV, et al. Additive manufacturing of magnetic materials. Prog Mater Sci 2020, 114: 100688.10.1016/j.pmatsci.2020.100688 ↗
76. Zhang CQ, Li XJ, Jiang LM, et al. 3D printing of functional magnetic materials: From design to applications. Adv Funct Mater 2021, 31: 2102777.10.1002/adfm.202102777 ↗
77. Xu HF, Medina-Sánchez M, Magdanz V, et al. Spermhybrid micromotor for targeted drug delivery. ACS Nano 2018, 12: 327–337.10.1021/acsnano.7b06398 ↗
78. Bollig LM, Hilpisch PJ, Mowry GS, et al. 3D printed magnetic polymer composite transformers. J Magn Magn Mater 2017, 442: 97–101.10.1016/j.jmmm.2017.06.070 ↗
79. Qian Y, Yao ZJ, Lin HY, et al. Mechanical and microwave absorption properties of 3D-printed Li0.44Zn0.2Fe2.36O4/polylactic acid composites using fused deposition modeling. J Mater Sci Mater Electron 2018, 29: 19296–19307.10.1007/s10854-018-0056-3 ↗
80. Wei XX, Peng E, Xie YY, et al. Extrusion printing of a designed three-dimensional YBa2Cu3O7−x superconductor with milled precursor powder. J Mater Chem C 2017, 5: 3382–3389.10.1039/C6TC05393A ↗
81. Coey JMD. Hard magnetic materials: A perspective. IEEE Trans Magn 2011, 47: 4671–4681.10.1109/TMAG.2011.2166975 ↗
82. Rezlescu L, Rezlescu E, Popa PD, et al. Fine barium hexaferrite powder prepared by the crystallisation of glass. J Magn Magn Mater 1999, 193: 288–290.10.1016/S0304-8853(98)00442-9 ↗
83. Brown DN. Fabrication, processing technologies, and new advances for RE-Fe-B magnets. IEEE Trans Magn 2016, 52: 2101209.10.1109/TMAG.2016.2535482 ↗
84. Gutfleisch O. Controlling the properties of high energy density permanent magnetic materials by different processing routes. J Phys D: Appl Phys 2000, 33: R157–R172.10.1088/0022-3727/33/17/201 ↗
85. Kneller EF, Hawig R. The exchange-spring magnet: A new material principle for permanent magnets. IEEE Trans Magn 1991, 27: 3588–3560.10.1109/20.102931 ↗
86. Périgo EA, Weidenfeller B, Kollár P, et al. Past, present, and future of soft magnetic composites. Appl Phys Rev 2018, 5: 031301.10.1063/1.5027045 ↗
87. Coey JMD. Magnetic materials. J Alloys Compd 2001, 326: 2–6.10.1016/S0925-8388(01)01239-7 ↗
88. Rikken RS, Nolte RJ, Maan JC, et al. Manipulation of micro- and nanostructure motion with magnetic fields. Soft Matter 2014, 10: 1295–1308.10.1039/C3SM52294F ↗
89. Coey JMD. Perspective and prospects for rare earth permanent magnets. Engineering 2020, 6: 119–131.10.1016/j.eng.2018.11.034 ↗
90. Utela B, Storti D, Anderson R, et al. A review of process development steps for new material systems in three dimensional printing (3DP). J Manuf Process 2008, 10: 96–104.10.1016/j.jmapro.2009.03.002 ↗
91. Duoss EB, Weisgraber TH, Hearon K, et al. Three-dimensional printing of elastomeric, cellular architectures with negative stiffness. Adv Funct Mater 2014, 24: 4905–4913.10.1002/adfm.201400451 ↗
92. Gross BC, Erkal JL, Lockwood SY, et al. Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. Anal Chem 2014, 86: 3240–3253.10.1021/ac403397r ↗
93. Kodama H. Automatic method for fabricating a three-dimensional plastic model with photo-hardening polymer. Rev Sci Instrum 1981, 52: 1770–1773.10.1063/1.1136492 ↗
94. Hull CW. Apparatus for production of three-dimensional objects by stereolithography. U.S. Patent 4 575 330, 1986.
95. Lu Y, Mapili G, Suhali G, et al. A digital micro-mirror device-based system for the microfabrication of complex, spatially patterned tissue engineering scaffolds. J Biomed Mater Res A 2006, 77A: 396–405.10.1002/jbm.a.30601 ↗
96. Sun C, Fang N, Wu DM, et al. Projection micro-stereolithography using digital micro-mirror dynamic mask. Sens Actuat A Phys 2005, 121: 113–120.10.1016/j.sna.2004.12.011 ↗
97. Tumbleston JR, Shirvanyants D, Ermoshkin N, et al. Continuous liquid interface production of 3D objects. Science 2015, 347: 1349–1352.10.1126/science.aaa2397 ↗
98. Cumpston BH, Ananthavel SP, Barlow S, et al. Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication. Nature 1999, 398: 51–54.10.1038/17989 ↗
99. Kuebler SM, Braun KL, Zhou WH, et al. Design and application of high-sensitivity two-photon initiators for three-dimensional microfabrication. J Photochem Photobiol A Chem 2003, 158: 163–170.10.1016/S1010-6030(03)00030-3 ↗
100. Rasaki SA, Xiong DY, Xiong SF, et al. Photopolymerization-based additive manufacturing of ceramics: A systematic review. J Adv Ceram 2021, 10: 442–471.10.1007/s40145-021-0468-z ↗