Composition and structure design of three-layered composite phosphors for high color rendering chip-on-board light-emitting diode devices
Source abstract
Abstract
Abstract A three-layered phosphor structure was designed and prepared by the spin coating of BaSi2N2O2:Eu (cyan-emitting) and (Sr,Ca)AlSiN3:Eu (red-emitting) phosphor films on the yellow-emitting Y3Al5O12:Ce (YAG:Ce) phosphor ceramic synthesized by the solid-state reaction under vacuum sintering. In order to achieve high color rendering lighting, the influence of the composition and structure of the three-layered phosphors on the optical, thermal, and electrical properties of the chip-on-board (COB) packaged white-light-emitting diodes (WLEDs) was studied systematically. The WLED with the structure of “red+cyan+yellow” (R+C+Y) three-layered phosphor generated neutral white light and had a luminous efficacy of 75 lm/W, the fidelity index (Rf) of 93, the gamut index (Rg) of 97, and the correlated color temperature (CCT) of 3852 K. Under the excitation of laser diode (LD), the layer-structured phosphor yielded the white light with a luminous efficacy of 120 lm/W, color rendering index (CRI) of 90, and CCT of 5988 K. The result indicates that the three-layered phosphor structure is a promising candidate to achieve high color rendering and high luminous efficacy lighting.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Haitz R, Tsao JY. Solid-state lighting: ‘The case’ 10 years after and future prospects. Phys Status Solidi (a) 2011, 208: 17–29.10.1002/pssa.201026349 ↗
2. Wierer JJ, Tsao JY, Sizov DS. Comparison between blue lasers and light-emitting diodes for future solid-state lighting. Laser Photonics Rev 2013, 7: 963–993.10.1002/lpor.201300048 ↗
3. Tsao JY, Crawford MH, Coltrin ME, et al. Toward smart and ultra-efficient solid-state lighting. Adv Opt Mater 2014, 2: 809–836.10.1002/adom.201400131 ↗
4. Xu J, Thorseth A, Xu C, et al. Investigation of laser-induced luminescence saturation in a single-crystal YAG:Ce phosphor: Towards unique architecture, high saturation threshold, and high-brightness laser-driven white lighting. J Lumin 2019, 212: 279–285.10.1016/j.jlumin.2019.04.027 ↗
5. Song YH, Kwon SB, Jung MK, et al. Fabrication design for a high-quality laser diode-based ceramic converter for a laser headlamp application. Ceram Int 2018, 44: 1182–1186.10.1016/j.ceramint.2017.09.213 ↗
6. Arjoca S, Víllora EG, Inomata D, et al. Temperature dependence of Ce:YAG single-crystal phosphors for high-brightness white LEDs/LDs. Mater Res Express 2015, 2: 055503.10.1088/2053-1591/2/5/055503 ↗
7. Li SX, Wang L, Hirosaki N, et al. Color conversion materials for high-brightness laser-driven solid-state lighting. Laser Photonics Rev 2018, 12: 1800173.10.1002/lpor.201800173 ↗
8. Lin H, Hu T, Cheng Y, et al. Glass ceramic phosphors: Towards long-lifetime high-power white light-emittingdiode applications-A review. Laser Photonics Rev 2018, 12: 1700344.10.1002/lpor.201700344 ↗
9. Nishiura S, Tanabe S, Fujioka K, et al. Properties of transparent Ce:YAG ceramic phosphors for white LED. Opt Mater 2011, 33: 688–691.10.1016/j.optmat.2010.06.005 ↗
10. Wei N, Lu TC, Li F, et al. Transparent Ce:Y3Al5O12 ceramic phosphors for white light-emitting diodes. Appl Phys Lett 2012, 101: 061902.10.1063/1.4742896 ↗
11. Ji C, Ji LY, Lian LC, et al. Low-temperature solution synthesis and characterization of Ce-doped YAG nanoparticles. J Rare Earth 2015, 33: 591–598.10.1016/S1002-0721(14)60458-0 ↗
12. Liu GH, Zhou ZZ, Shi Y, et al. Ce:YAG transparent ceramics for applications of high power LEDs: Thickness effects and high temperature performance. Mater Lett 2015, 139: 480–482.10.1016/j.matlet.2014.10.114 ↗
13. Zheng P, Li SX, Wei R, et al. Unique design strategy for laser-driven color converters enabling superhigh-luminance and high-directionality white light. Laser Photonics Rev 2019, 13: 1900147.10.1002/lpor.201900147 ↗
14. Hua H, Feng SW, Ouyang ZY, et al. YAGG:Ce transparent ceramics with high luminous efficiency for solid-state lighting application. J Adv Ceram 2019, 8: 389–398.10.1007/s40145-019-0321-9 ↗
15. Feng SW, Qin HM, Wu GQ, et al. Spectrum regulation of YAG:Ce transparent ceramics with Pr, Cr doping for white light emitting diodes application. J Eur Ceram Soc 2017, 37: 3403–3409.10.1016/j.jeurceramsoc.2017.03.061 ↗
16. Shao XC, Zhou SM, Tang YR, et al. Luminescence characteristics of Ce:YAG ceramic phosphors with Gd3+ doping for white light-emitting diodes. J Inorg Mater 2018, 33: 1119–1123. (in Chinese)10.15541/jim20170616 ↗
17. Nishiura S, Tanabe S, Fujioka K, et al. Preparation of transparent Ce3+:GdYAG ceramics phosphors for white LED. IOP Conf Ser: Mater Sci Eng 2011, 18: 102005.10.1088/1757-899X/18/10/102005 ↗
18. Liu X, Zhou HY, Hu ZW, et al. Transparent Ce:GdYAG ceramic color converters for high-brightness white LEDs and LDs. Opt Mater 2019, 88: 97–102.10.1016/j.optmat.2018.11.031 ↗
19. Ling JR, Zhou YF, Xu WT, et al. Red-emitting YAG:Ce, Mn transparent ceramics for warm WLEDs application. J Adv Ceram 2020, 9: 45–54.10.1007/s40145-019-0346-0 ↗
20. Pricha I, Rossner W, Moos R. Layered ceramic phosphors based on CaAlSiN3:Eu and YAG:Ce for white light-emitting diodes. J Am Ceram Soc 2016, 99: 211–217.10.1111/jace.13948 ↗
21. Legentil P, Leroux F, Therias S, et al. Sulforhodamine B-LDH composite as a rare-earth-free red-emitting phosphor for LED lighting. J Mater Chem C 2020, 8: 11906–11915.10.1039/D0TC02802A ↗
22. Nyalosaso JL, Boonsin R, Vialat P, et al. Towards rare-earth-free white light-emitting diode devices based on the combination of dicyanomethylene and pyranine as organic dyes supported on zinc single-layered hydroxide. Beilstein J Nanotechnol 2019, 10: 760–770.10.3762/bjnano.10.75 ↗
23. Li SX, Zhu QQ, Wang L, et al. CaAlSiN3:Eu2+ translucent ceramic: A promising robust and efficient red color converter for solid state laser displays and lighting. J Mater Chem C 2016, 4: 8197–8205.10.1039/C6TC02518H ↗
24. Wang L, Xie RJ, Li YQ, et al. Ca1−xLixAl1−xSi1+xN3:Eu2+ solid solutions as broadband, color-tunable and thermally robust red phosphors for superior color rendition white light-emitting diodes. Light: Sci Appl 2016, 5: e16155.10.1038/lsa.2016.155 ↗
25. Wang L, Xie RJ, Suehiro T, et al. Down-conversion nitride materials for solid state lighting: Recent advances and perspectives. Chem Rev 2018, 118: 1951–2009.10.1021/acs.chemrev.7b00284 ↗
26. Oh JH, Yang SJ, Do YR. Healthy, natural, efficient and tunable lighting: Four-package white LEDs for optimizing the circadian effect, color quality and vision performance. Light: Sci Appl 2014, 3: e141.10.1038/lsa.2014.22 ↗
27. Yan CP, Zhuang WD, Liu RH, et al. Dehydrogenation-driven to synthesize high-performance Lu2Si4N6C:Ce3+-a broad green-emitting phosphor for full-spectrum lighting. J Alloys Compd 2019, 783: 855–862.10.1016/j.jallcom.2019.01.006 ↗
28. Fang MH, Ni CC, Zhang XJ, et al. Enhance color rendering index via full spectrum employing the important key of cyan phosphor. ACS Appl Mater Interfaces 2016, 8: 30677–30682.10.1021/acsami.6b10233 ↗
29. Zhao M, Xia Z, Huang X, et al. Li substituent tuning of LED phosphors with enhanced efficiency, tunable photoluminescence, and improved thermal stability. Sci Adv 2019, 5: eaav0363.10.1126/sciadv.aav0363 ↗
30. Zhao M, Liao H, Molokeev MS, et al. Emerging ultra-narrow-band cyan-emitting phosphor for white LEDs with enhanced color rendition. Light Sci Appl 2019, 8: 38.10.1038/s41377-019-0148-8 ↗
31. Zhang YP, Luo L, Chen GT, et al. Green and red phosphor for LED backlight in wide color gamut LCD. J Rare Earth 2020, 38: 1–12.10.1016/j.jre.2019.10.005 ↗
32. Liang MZ, Xu JF, Qiang YC, et al. Ce3+ doped BaLu2Al2Ga2SiO12—A novel blue-light excitable cyan-emitting phosphor with ultra-high quantum efficiency and excellent stability for full-spectrum white LEDs. J Rare Earth 2020, https://doi.org/10.1016/j.jre.2020.09.015.10.1016/j.jre.2020.09.015 ↗
33. Kimura N, Sakuma K, Hirafune S, et al. Extrahigh color rendering white light-emitting diode lamps using oxynitride and nitride phosphors excited by blue light-emitting diode. Appl Phys Lett 2007, 90: 051109.10.1063/1.2437090 ↗
34. Li YQ, Delsing ACA, de With G, et al. Luminescence properties of Eu2+-activated alkaline-earth silicon-oxynitride MSi2O2−δN2+2/3δ (M = Ca, Sr, Ba): A promising class of novel LED conversion phosphors. Chem Mater 2005, 17: 3242–3248.10.1021/cm050175d ↗
35. Zhang YL, Hu S, Wang ZJ, et al. Pore-existing Lu3Al5O12:Ce ceramic phosphor: An efficient green color converter for laser light source. J Lumin 2018, 197: 331–334.10.1016/j.jlumin.2018.01.014 ↗
36. Fujita S, Sakamoto A, Tanabe S. Luminescence characteristics of YAG glass-ceramic phosphor for white LED. IEEE J Sel Top Quantum Electron 2008, 14: 1387–1391.10.1109/JSTQE.2008.920285 ↗
37. Li Y, Hu LL, Yang BB, et al. Thermal stability and reliability studies of (Sr,Ca)AlSiN3:Eu2+ phosphors for LED application. J Mater Sci: Mater Electron 2017, 28: 19155–19163.
38. Liu XL, Song Z, Wang SX, et al. The red persistent luminescence of (Sr,Ca)AlSiN3:Eu2+ and mechanism different to SrAl2O4:Eu2+, Dy3+. J Lumin 2019, 208: 313–321.10.1016/j.jlumin.2018.12.069 ↗
39. Wang QY, Dong Y, Shao QY, et al. Low-pressure preparation of Eu-Doped (Sr/Ca)AlSiN3 with Li3N flux and its thermal quenching properties. Optoelectron Adv Mater-Rapid Commun 2018, 12: 95–99.
40. Yao FF, Wang L, Lv Y, et al. Composition-dependent thermal degradation of red-emitting (Ca1−xSrx)AlSiN3:Eu2+ phosphors for high color rendering white LEDs. J Mater Chem C 2018, 6: 890–898.10.1039/C7TC04356B ↗
41. Bachmann V, Ronda C, Meijerink A. Temperature quenching of yellow Ce3+ luminescence in YAG:Ce. Chem Mater 2009, 21: 2077–2084.10.1021/cm8030768 ↗
42. Wang YH, Ding JY, Wang YC. et al. Structural design of new Ce3+/Eu2+-doped or co-doped phosphors with excellent thermal stabilities for WLEDs. J Mater Chem C 2019, 7: 1792–1820.10.1039/C8TC06013D ↗
43. Que MD, Ci ZP, Wang YH, et al. Crystal structure and luminescence properties of a cyan emitting Ca10(SiO4)3(SO4)3F2:Eu2+ phosphor. CrystEngComm 2013, 15: 6389–6394.10.1039/c3ce40482j ↗