The causes of non-uniform flame treatment of polypropylene film surfaces

A cross-web non-uniformity ('laning') in the flame surface modification of polypropylene (PP) film was investigated using flame temperature measurements and Wilhelmy plate force measurements. To associate the cross-web non-uniformity in the flame treatment with specific features of the flame supported on an industrial 4-port ribbon burner, the temperature and force measurements were registered to a specific burner port. The Wilhelmy force measurements show that the upstream pair of ribbon-burner ports causes a slightly greater treatment of the PP surface than the corresponding downstream pair of ports. The average temperature experienced by the PP as the film traverses through the flame is noticeably higher along the down-web line of the upstream burner ports as compared with a line passing through the downstream pair. This greater average temperature correlates to an exposure to a greater concentration of the active species, such as OH radicals, that cause the surface oxidation of the PP.