journal article·2013-10

Evaluation of corn germ protein as an extender in plywood adhesive

Mila P. Hojilla-Evangelista

Publisher page

Abstract

This study was conducted to evaluate the potential of wet-milled corn germ protein as an extender in plywood adhesive. Partially defatted dried corn germ from wet-milling, containing 2.1% (dry basis, db) crude oil and 24.7% (db) crude protein, was ground to 40-mesh particle size to produce the meal. The predominant water- and saline-soluble proteins were extracted from the corn germ meal (CGM) by using 0.1 M NaCl as solvent in a method that used homogenization, centrifugation, dialysis, and freeze-drying. The recovered freeze-dried protein extract (FDPE) was substituted (on protein content basis) for wheat flour in the standard adhesive mix for sprayline coaters. Adhesive containing CGM was also prepared in the same manner. Mixing and adhesion properties of the corn germ-based adhesives were compared with those of the industry standard adhesive. The adhesive containing FDPE showed dispersibility and mixing behaviors, as well as viscosity values that were almost identical to those of the industry standard and superior to those of CGM adhesive. The mean wet tensile strength of the adhesive containing FDPE was notably greater (1.71 MPa) than that of CGM-based adhesive (1.34 MPa) and wheat-based standard adhesive (1.38 MPa), which indicated stronger bonding. The results demonstrated that corn germ protein has the potential to be an alternative protein extender in plywood adhesives for sprayline coaters.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Lignin and Wood Chemistry · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Lambuth AL. Adhesives from renewable resources: historical perspective and wood industry needs. In: Hemingway RW, Conner AH, editors. Adhesives from renewable resources. Washington (DC): American Chemical Society; 1989. 1–10.10.1021/bk-1989-0385.ch001 ↗
2. Kreibich RE, Steynberg PJ, Hemingway RW. End-jointing green lumber with soybond: wood residues into revenue. In: Proceedings of the Residual Wood Conference. Richmond, BC, Canada. 1997.
3. Huang W · Journal of the American Oil Chemists Society · 2000 · 77 · 10110.1007/s11746-000-0016-6 ↗
4. Yang I · Journal of the American Oil Chemists Society · 2005 · 82 · 231
5. Li K · Journal of the American Oil Chemists Society · 2004 · 81 · 48710.1007/s11746-004-0928-1 ↗
6. Hojilla-Evangelista MP · Journal of the American Oil Chemists Society · 2002 · 79 · 114510.1007/s11746-002-0618-z ↗
7. Babcock GE · Industrial and Engineering Chemistry · 1947 · 39 · 8610.1021/ie50453a902 ↗
8. Senti FR · Cereal Science Today · 1965 · 10 · 361
9. Alexander RJ. Industrial uses of dry-milled corn products. In: Pomeranz Y, editor. Industrial uses of cereals. St. Paul (MN): American Association of Cereal Chemists; 1973. 303–15.
10. Alexander RJ, Krueger RK. Art of manufacturing compression-molded particle board with nitrogenous modified amylaceous binder. 1976; United States Patent 3,983,084.
11. Tatara RA · Journal of Polymers and the Environment · 2007 · 15 · 8910.1007/s10924-007-0052-9 ↗
12. Imam S · Polymer Degradation and Stability · 2001 · 73 · 52910.1016/S0141-3910(01)00114-8 ↗
13. Moubarik A · Starch/Stärke · 2010 · 62 · 13110.1002/star.200900228 ↗
14. Moubarik A · European Journal of Wood and Wood Products · 2010 · 68 · 42710.1007/s00107-009-0379-0 ↗
15. Wilson CM. Proteins of the kernel. In: Watson SA, Ramstad PE, editors. Corn: chemistry and technology. St. Paul (MN): American Association of Cereal Chemists; 1987. 289–93.
16. Wang CR · Journal of Food Science · 1991 · 56 · 45510.1111/j.1365-2621.1991.tb05302.x ↗
17. Wang CR · Journal of Food Science · 1992 · 57 · 72610.1111/j.1365-2621.1992.tb08082.x ↗
18. Gnanasambandam R · Journal of Food Science · 1992 · 57 · 82910.1111/j.1365-2621.1992.tb14304.x ↗
19. Hojilla-Evangelista MP, Evangelista RL. Effects of cooking and screw-pressing on functional properties ofCupheaPSR23 seed proteins. Journal of the American Oil Chemists Society. 2006;83: 713–8.10.1007/s11746-006-5028-8 ↗
20. Sessa D · Journal of the Science of Food and Agriculture · 2003 · 84 · 7510.1002/jsfa.1612 ↗
21. Sellers T · 1985
22. Adhesive policy. Tacoma (WA): American Plywood Association; 1984. p. 7–8.
23. Pratt DB. Criteria of flour quality. In: Pomeranz Y. editor. Wheat: chemistry and technology. St. Paul (MN): American Association of Cereal Chemists; 1971. 220–21.
24. Wright KN. Nutritional properties and feeding values of corn and its by-products. In: Watson SA, Ramstad PE, editors. Corn: chemistry and technology. St. Paul (MN): American Association of Cereal Chemists; 1987. 448–9.
25. Blanchard PH. Technology of corn wet milling and associated processes. New York (NY): Elsevier Science; 1992. p. 72–4.
26. Dailey OD · Journal of Agriculture and Food Chemistry · 2000 · 48 · 135210.1021/jf990866s ↗
27. Kinsella JE · Critical Reviews in Food Science and Nutrition · 1976 · 7 · 21910.1080/10408397609527208 ↗
28. Krinski TL, Scacciaferro LM. Protein adhesive binder and process for forming a protein adhesive binder, United States patent 5,766,331. 1998.
29. Mohanty AK, Wu Q, Singh A. Bioadhesive from distillers’ dried grains with solubles (DDGS) and the methods of making those. United States patent 7,837,779. 2010.