Characterization of Nano‐Particles Using Laser‐Induced Incandescence

Abstract Laser‐induced incandescence (LII) is introduced as a valuable tool for the characterization of nanoparticles. This optical measurement technique is based on the heating of the particles by a short laser pulse and the subsequent detection of the thermal radiation. It has been applied successfully for the investigation of soot in different fields of application, which is described here in the form of an overview with a focus on work done at the LTT‐Erlangen during the last 10 years. In laboratory flames the soot primary particle size, volume concentration, and relative aggregate size have been determined in combination with the number density of primary particles. Furthermore, the primary particle sizes of carbon blacks have been measured in situ and online under laboratory conditions and also in production reactors. Measurements with different types of commercially available carbon black powders, which were dispersed in a measurement chamber yielded a good correlation between LII results and the specified product properties. Particle diameters determined by LII in a furnace black reactor correlate very well with the CTAB‐absorption number, which is a measure for the specific surface area. It turned out that the LII method is not affected by variations of the aggregate structure of the investigated carbon blacks. The LII signal also contains information on the primary particle size distribution, which can be reconstructed by the evaluation of the signal decay time at, at least, two different time intervals. Additionally, soot mass concentrations have been determined inside diesel engines and online measurements were performed in the exhaust gas of such engines for various engine conditions simultaneously providing information about primary particle size, soot volume, and number concentration. The LII results exhibit good correlation with traditional measurement techniques, e.g., filter smoke number measurements. In addition to the soot measurements, primarily tests with other nanoparticles like TiO₂ or metal particles are encouraging regarding the applicability of the technique for the characterization of such different types of nanoparticles.