journal article·2025-02

An enhancement of the yield strength and hardness in the friction stir welding of AZ31/AA3105 joint

Alireza Karimian Khozani, Seyyed Amirhossein Alavi, Mahmoud Afshari, Hossein Afshari, Marwea Al-hedrewy, Mohammad Reza Samadi, Reza Beygi

Publisher page

Abstract

The objective of this research is to optimize the yield strength and hardness of AZ31/AA3105 joint during the single pass friction stir welding (FSW). For this purpose, Taguchi method was used to examine the influence of FSW parameters such as rotating speed, linear speed, advancing side and shoulder diameter on the hardness and yield strength of the welding. The microstructure of the joint has also been analyzed by optical and scanning electron microscopy (SEM) to evaluate the joint quality. The results of microstructure analysis indicated that a high quality joint with thin intermetallic layers obtained at rotating speed of 1100 rpm and linear speed of 30 mm/min. The optimization results indicated that the hardness (78.06 HV) and yield strength (129.2 MPa) can be improved simultaneously with the advancing side of Mg, rotating speed of 1100 rpm, linear speed of 30 mm/min, and shoulder diameter of 15 mm. The fracture surface of samples indicated that a combination of brittle and ductile fracture was occurred at rotating speed of 1100 rpm and linear speed of 30 mm/min, which improved the ductility and toughness. It was concluded from the obtained results that a high-quality joint with improved mechanical properties can be obtained between AZ31 and AA3105 alloys in the optimal conditions of FSW parameters.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Arak University

Mechanical Engineering Department, University of Birjand

Department of Mechanical Engineering, Amirkabir University of Technology

Mechanical Engineering Department, Engineering Faculty, University of Birjand

College of Technical Engineering, The Islamic University

College of Technical Engineering, The Islamic University of Al Diwaniyah

College of Technical Engineering, The Islamic University of Babylon

Department of Mechanical Engineering, National University of Skills (NUS)

References (60)

Show source-provided references
1. 10.1016/j.jmrt.2021.09.03710.1016/j.jmrt.2021.09.037 ↗
2. 10.1108/AEAT-11-2014-019410.1108/AEAT-11-2014-0194 ↗
3. 10.1007/s00170-020-06209-610.1007/s00170-020-06209-6 ↗
4. 10.1080/13621718.2022.208044910.1080/13621718.2022.2080449 ↗
5. 10.1177/0954408923119544410.1177/09544089231195444 ↗
6. 10.1080/13621718.2016.125171210.1080/13621718.2016.1251712 ↗
7. 10.1080/01694243.2022.206743710.1080/01694243.2022.2067437 ↗
8. 10.1080/01694243.2020.178071610.1080/01694243.2020.1780716 ↗
9. 10.1016/j.jmst.2022.08.02510.1016/j.jmst.2022.08.025 ↗
10. 10.1016/j.mtcomm.2022.10501710.1016/j.mtcomm.2022.105017 ↗
11. 10.1002/adem.20100023810.1002/adem.201000238 ↗
12. 10.3139/146.11100310.3139/146.111003 ↗
13. 10.1016/S1003-6326(13)62590-X10.1016/S1003-6326(13)62590-X ↗
14. 10.1007/s11661-010-0340-110.1007/s11661-010-0340-1 ↗
15. 10.1007/s12613-019-1834-510.1007/s12613-019-1834-5 ↗
16. 10.3390/jmmp605009510.3390/jmmp6050095 ↗
17. 10.1016/j.jmapro.2020.12.06810.1016/j.jmapro.2020.12.068 ↗
18. 10.1016/j.scriptamat.2004.02.00210.1016/j.scriptamat.2004.02.002 ↗
19. 10.1016/j.msea.2020.14055410.1016/j.msea.2020.140554 ↗
20. 10.1016/j.jmapro.2021.08.04910.1016/j.jmapro.2021.08.049 ↗
21. 10.1016/j.pmatsci.2020.10075210.1016/j.pmatsci.2020.100752 ↗
22. 10.1016/j.matdes.2016.05.11110.1016/j.matdes.2016.05.111 ↗
23. 10.1016/j.jallcom.2020.15434310.1016/j.jallcom.2020.154343 ↗
24. 10.1016/j.jmatprotec.2014.11.03910.1016/j.jmatprotec.2014.11.039 ↗
25. 10.3390/pr909155010.3390/pr9091550 ↗
26. 10.1016/j.jmrt.2022.09.07010.1016/j.jmrt.2022.09.070 ↗
27. 10.1016/j.cirpj.2021.03.01510.1016/j.cirpj.2021.03.015 ↗
28. 10.1016/j.jmrt.2023.08.02810.1016/j.jmrt.2023.08.028 ↗
29. 10.1142/S021968672450027610.1142/S0219686724500276 ↗
30. 10.1016/j.scriptamat.2009.02.02010.1016/j.scriptamat.2009.02.020 ↗
31. 10.1016/j.jma.2017.12.00410.1016/j.jma.2017.12.004 ↗
32. 10.1016/j.jma.2015.10.00210.1016/j.jma.2015.10.002 ↗
33. 10.1016/j.matlet.2008.04.08010.1016/j.matlet.2008.04.080 ↗
34. 10.1080/10426914.2017.129195710.1080/10426914.2017.1291957 ↗
35. 10.1016/j.jmatprotec.2019.11636610.1016/j.jmatprotec.2019.116366 ↗
36. 10.1007/s00170-022-09701-310.1007/s00170-022-09701-3 ↗
37. 10.1007/s00170-022-09969-510.1007/s00170-022-09969-5 ↗
38. 10.1080/2374068X.2022.208329710.1080/2374068X.2022.2083297 ↗
39. 10.1007/s13632-023-00980-010.1007/s13632-023-00980-0 ↗
40. 10.1007/s12666-023-03179-710.1007/s12666-023-03179-7 ↗
41. 10.1016/j.ijlmm.2022.03.00110.1016/j.ijlmm.2022.03.001 ↗
42. 10.1080/2374068X.2024.230707210.1080/2374068X.2024.2307072 ↗
43. 10.1080/01694243.2021.195252810.1080/01694243.2021.1952528 ↗
44. 10.1080/01694243.2024.236202910.1080/01694243.2024.2362029 ↗
45. 10.1080/01694243.2024.234516710.1080/01694243.2024.2345167 ↗
46. 10.1080/01694243.2023.221936710.1080/01694243.2023.2219367 ↗
47. 10.1080/01694243.2023.224519610.1080/01694243.2023.2245196 ↗
48. 10.1080/01694243.2024.230226810.1080/01694243.2024.2302268 ↗
49. 10.1080/01694243.2021.197561410.1080/01694243.2021.1975614 ↗
50. 10.1016/S1003-6326(21)65753-910.1016/S1003-6326(21)65753-9 ↗
51. 10.1007/s13369-021-06494-710.1007/s13369-021-06494-7 ↗
52. 10.1016/j.jajp.2024.10020710.1016/j.jajp.2024.100207 ↗
53. 10.1016/j.jma.2022.01.00710.1016/j.jma.2022.01.007 ↗
54. 10.1016/j.matdes.2015.03.01710.1016/j.matdes.2015.03.017 ↗
55. 10.1016/j.jmapro.2021.03.05710.1016/j.jmapro.2021.03.057 ↗
56. 10.1016/j.mtcomm.2021.10213210.1016/j.mtcomm.2021.102132 ↗
57. 10.1016/j.msea.2019.05.06710.1016/j.msea.2019.05.067 ↗
58. 10.3390/machines1205033510.3390/machines12050335 ↗
59. 10.1007/s40799-020-00428-y10.1007/s40799-020-00428-y ↗
60. 10.1007/s10854-024-13261-510.1007/s10854-024-13261-5 ↗