Experimental and numerical investigations of adhesively bonded carbon/carbon composites subjected to interlaminar shear loads
Source abstract
Abstract
The interlaminar shear strength (ILSS) of adhesively bonded carbon/carbon composites (C/Cs) was investigated experimentally and numerically. A 3 D finite element model was established to study the damage behavior and stress distribution of adhesively bonded C/Cs based on Linde failure criterion and cohesive zone model. Good agreements were observed between experimental and numerical results, thus verifying the validity of the established numerical model. Test results show that the ILSS of adhesively bonded C/Cs specimens is 12.21 MPa, 16.2% higher than that of intact specimens. Therefore, the adhesive is proved to be quite effective to enhance the interlaminar strength of the C/Cs. Damage contours and stress distribution analysis of the adhesive were discussed numerically. Shear stress τ13 is the principal factor for the damage.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fire effects on concrete materials · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Aeronautics and Astronautics, Sun Yat-sen University, Guangzhou, China;
Academy of Opto-Electronics, Chinese Academy of Sciences, Beijing, China;
Science and Technology on Space Physics Laboratory, China Academy of Launch Vehicle Technology, Beijing, China
References (37)
Show source-provided references
1. 10.1016/S0261-3069(97)00024-110.1016/S0261-3069(97)00024-1 ↗
2. 10.1016/j.carbon.2008.08.01110.1016/j.carbon.2008.08.011 ↗
3. 10.1016/S0008-6223(02)00025-810.1016/S0008-6223(02)00025-8 ↗
4. 10.1016/0008-6223(87)90197-710.1016/0008-6223(87)90197-7 ↗
5. 10.1016/0008-6223(95)00095-U10.1016/0008-6223(95)00095-U ↗
6. 10.1016/0008-6223(72)90372-710.1016/0008-6223(72)90372-7 ↗
7. Zhang XH · Inorg Mater · 2007 · 22 · 963
8. 10.1016/S0008-6223(02)00442-610.1016/S0008-6223(02)00442-6 ↗
9. 10.1016/j.carbon.2004.09.02610.1016/j.carbon.2004.09.026 ↗
10. 10.1016/S0266-3538(97)00241-810.1016/S0266-3538(97)00241-8 ↗
11. Han LJ · New Carbon Mater · 2004 · 19 · 97
12. Glenn F · J Adv Mater · 1994 · 25 · 36
13. 10.1016/j.ijadhadh.2005.01.00610.1016/j.ijadhadh.2005.01.006 ↗
14. Xiang X · Chin J Nonferrous Met · 2004 · 14 · 1799
15. 10.1177/07316844870060040110.1177/073168448700600401 ↗
16. 10.1177/00219983910250050710.1177/002199839102500507 ↗
17. 10.1177/00219983900240040410.1177/002199839002400404 ↗
18. 10.1177/00219983920260050510.1177/002199839202600505 ↗
19. 10.1016/S0008-6223(00)00067-110.1016/S0008-6223(00)00067-1 ↗
20. ASTM standard D2344/D 2344M. ASTM, West Conshohocken, PA, 2000.
21. 10.1016/0045-7949(94)00605-310.1016/0045-7949(94)00605-3 ↗
22. 10.1002/pc.2314910.1002/pc.23149 ↗
23. 10.1016/j.compstruct.2014.09.04810.1016/j.compstruct.2014.09.048 ↗
24. 10.1177/073168440504355310.1177/0731684405043553 ↗
25. 10.1080/00218464.2014.98734310.1080/00218464.2014.987343 ↗
26. 10.1080/00218464.2015.103604210.1080/00218464.2015.1036042 ↗
27. 10.1080/01694243.2015.113180610.1080/01694243.2015.1131806 ↗
28. Linde P, Pleitner J, Boer HD, et al. Modelling and simulation of fibre metal laminates. Proceedings of the ABAQUS Users’ Conference. Boston (MA); 2004; p. 421–439.
29. Li X · J Appl Polym Sci · 2017 · 134 · 4478310.1002/app.44783 ↗
30. Tan YY · Acta Aeronautica Et Astronautica Sinica · 2016 · 37 · 3734
31. 10.1016/j.compstruct.2015.01.03410.1016/j.compstruct.2015.01.034 ↗
32. 10.1177/00219983980320140110.1177/002199839803201401 ↗
33. 10.1016/j.compscitech.2004.08.00410.1016/j.compscitech.2004.08.004 ↗
34. 10.1016/j.engfracmech.2006.03.00610.1016/j.engfracmech.2006.03.006 ↗
35. 10.1016/S0022-5096(02)00075-310.1016/S0022-5096(02)00075-3 ↗
36. 10.1016/0266-3538(96)00005-X10.1016/0266-3538(96)00005-X ↗
37. ABAQUS Theory Manual, (HKS Inc., USA, 2012).