Analysis of the anisotropic mechanical properties of structural adhesive joints with curing-induced pre-deformations
Source abstract
Abstract
In modern lightweight construction, multi-material design has become increasingly important. An increasing number of structures are being adhered because adhesive joining technology can be used regardless of the material of the bonded partners. Owing to the dissimilar coefficients of thermal expansion, thermally induced relative displacements of the adherend occur during heat curing. Following these pre-deformations, changes in the mechanical properties of adhesive joints were observed. In this study, thick adherend shear specimens were used to induce defined relative displacements in the shear plane during the curing process. Quasi-static tests showed a directional dependence in the pre-deformation. This anisotropic behaviour was investigated in detail. Results showed that shear band formation occurred in the adhesive owing to the load during the cooling of joined structures. The restructuring of the polymer structure leads to changes in the mechanical properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Material Properties and Applications · Polymer Science and Applications · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratory for Material and Joining Technology (LWF), Paderborn University
References (42)
Show source-provided references
1. 10.1007/s12544-008-0001-210.1007/s12544-008-0001-2 ↗
2. 10.1080/13588265.2019.161709510.1080/13588265.2019.1617095 ↗
3. 10.1007/s00170-019-03613-510.1007/s00170-019-03613-5 ↗
4. 10.1007/s00158-024-03811-010.1007/s00158-024-03811-0 ↗
5. 10.1016/j.mser.2018.04.00110.1016/j.mser.2018.04.001 ↗
6. 10.3390/ma1422699110.3390/ma14226991 ↗
7. 10.1016/j.compositesb.2018.06.00910.1016/j.compositesb.2018.06.009 ↗
8. 10.1177/0954407022110013010.1177/09544070221100130 ↗
9. Hüsgen B. Beitrag zum Einfluß der Fertigung auf ausgewählte Eigenschaften von Klebverbindungen mit warmaushärtenden Klebstoffen [Contribution to the influence of production on selected properties of adhesively bonded joints with thermosetting adhesives]. Zugl.: Paderborn Universität Paderborn Diss. 1993 in Forschungsbericht des Laboratoriums für Werkstoff- und Fügetechnik der Universität – Gesamthochschule. Paderborn Paderborn: Universität Paderborn; 1993.
10. Hahn O Ewerszumrode A. Einfluss der Abbindebedingungen auf das Eigenschaftsprofil geklebter Verbindungen aus Fügeteilen mit unterschiedlichen Ausdehnungskoeffizienten [Influence of the setting conditions on the property profile of adhesively bonded joints made of parts with different coefficients of thermal expansion]. Laboratorium für Werkstoff- und Fügetechnik Paderborn; 1997.
11. 10.1080/0021846980801224410.1080/00218469808012244 ↗
12. 10.1016/S0045-7949(01)00139-010.1016/S0045-7949(01)00139-0 ↗
13. 10.1016/j.ijadhadh.2005.07.00610.1016/j.ijadhadh.2005.07.006 ↗
14. Eichleiter F. Fertigungs- und prozessbedingte Eigenschaften von Klebverbindungen im Karosseriebau [Production and process-related properties of adhesively bonded joints in car body construction]. Zugl.: Braunschweig Techn. Univ. Diss. 2011 in Forschungsberichte des Instituts für Füge- und Schweißtechnik Vol. 29. Aachen: Shaker; 2012. ISBN: 9783844007831.
15. 10.1016/j.ijadhadh.2020.10273510.1016/j.ijadhadh.2020.102735 ↗
16. 10.1533/9781845698058.3.38910.1533/9781845698058.3.389 ↗
17. 10.1016/B978-0-08-096532-1.00205-310.1016/B978-0-08-096532-1.00205-3 ↗
18. 10.1007/s40194-014-0195-y10.1007/s40194-014-0195-y ↗
19. Lutz A, Droste A, Brändli C. Strukturkleben im Fahrzeugleichtbaum, Eigenschaften und Haftungsspektrum moderner Strukturklebstoffe, Simulation und Anwendung im Karosserierohbau und in der Montage [Structural bonding in lightweight vehicle construction, properties and adhesion spectrum of modern structural adhesives, simulation and application in body-in-white construction and assembly]. Die Bibliothek der Technik, Bd. Landsberg Verl. Moderne Industrie; 2013. ISBN: 978-3-86236-052-9.
20. DuPont de Nemours BETAMATE 1496V: datasheet Sep; 2021.
21. 10.31030/177968010.31030/1779680 ↗
22. DELO Industrie Klebstoffe GmbH & Co. KGaA. Structural bonding – requirements adhesives and applications: technical information Mai; 2019.
23. 10.1365/s35145-011-0013-210.1365/s35145-011-0013-2 ↗
24. 10.1016/B978-0-444-51140-9.50039-110.1016/B978-0-444-51140-9.50039-1 ↗
25. Winter HH. Gel point. In: Mark HF, editor. Encyclopedia of polymer science and technology. Wiley; 2002, p. 1–15.
26. Aubel T Teutenberg D Meschut G et al. Methodenentwicklung zur Simulation des thermomechanischen Verhaltens von Klebschichten in hybriden Fügeverbindungen während des Aushärteprozesses [Development of methods for the simulation of the thermo-mechanical behavior of adhesive layers in hybrid joints during the curing process]. Final report on IGF project no. 18895 N in FOSTA Forschungsberichte Vol. 1087 Düsseldorf: forschungsvereinigung Stahlanwendung e.V. (FOSTA); 2018 p. 1087. ISBN: 978-3-96780-085-2.
27. 10.1557/mrs2003.12610.1557/mrs2003.126 ↗
28. 10.1007/978-94-011-5850-3_610.1007/978-94-011-5850-3_6 ↗
29. 10.1007/978-94-010-2355-9_810.1007/978-94-010-2355-9_8 ↗
30. 10.1007/978-94-011-5850-3_810.1007/978-94-011-5850-3_8 ↗
31. Kausch HH. Crazing in polymers. In: Advances in polymer science, Vol. 1. Berlin Springer; 1983.
32. 10.1007/978-94-017-1594-2_410.1007/978-94-017-1594-2_4 ↗
33. 10.3390/s2322921310.3390/s23229213 ↗
34. 10.1007/978-94-015-9231-4_4210.1007/978-94-015-9231-4_42 ↗
35. 10.1021/jp406200w10.1021/jp406200w ↗
36. 10.1007/978-94-010-2355-9_610.1007/978-94-010-2355-9_6 ↗
37. Bauschinger J. Über die Veränderung der Elastizitätsgrenze und die Festigkeit des Eisens und Stahls durch Strecken und Quetschen durch Erwärmen und Abkühlen und durch oftmals wiederholte Beanspruchungen [About the change in the elastic limit and the strength of iron and steel through stretching and crushing through heating and cooling and through often repeated stresses]. Communication Mechanical-technical laboratory Imperial Technical University Munich; 1886.
38. 10.1016/j.jmps.2022.10504610.1016/j.jmps.2022.105046 ↗
39. 10.1016/j.msea.2017.09.09110.1016/j.msea.2017.09.091 ↗
40. 10.1080/1478643720822744410.1080/14786437208227444 ↗
41. 10.1021/acs.macromol.3c0052610.1021/acs.macromol.3c00526 ↗
42. 10.1002/polb.2205610.1002/polb.22056 ↗