The microstructure and mechanical properties of aluminum/steel welded joint with Ni foil interlayers by FSLW
Source abstract
Abstract
Friction stir lap welding experiments between 6061 aluminum alloy plate and DP590 dual-phase steel plate were carried out. The effects of welding parameters and addition of Ni foil interlayers with different thickness on the microstructures and mechanical properties of the lap joints were investigated. The shear strength of the joint reached the maximum value of 6597 N and showed a mixed ductile-brittle fracture mode when the welding speed, the rotating speed and the thickness of the Ni foil intermediate layer were set to 100 mm/min, 900 rpm and 0.3 mm, respectively. A certain amount of beneficial plastic AlNi and FeNi3 intermetallic compounds are formed through the reaction of Al, Fe and Ni at the aluminum alloy/steel interface.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Material and Chemical Engineering, Hubei University of Technology, Wuhan, China
Key Laboratory of Green Materials for Light Industry of Hubei Provincial, Wuhan, China
Library of Hubei University of Technology, Wuhan, China
Wuhan Heavy Duty Machine Tool Group Corporation, Wuhan, China
Funding
the Special Funds for Guiding Local Scientific and Technological Development by the Central Government of China · the Doctoral Research Start-up Fund of Hubei University of Technology · the Youth Talent Project of Science and Technology Research Program for Education Department in Hubei Province · the Educational Reform Research Project for Postgraduate Students of Hubei University of Technology
References (32)
Show source-provided references
1. 10.3390/met1210157410.3390/met12101574 ↗
2. Huang X, Zhou L, Jiang J. Influence of friction stir welding process parameters on the microstructure and properties of ultra-thin aluminum alloy plate/high-strength steel lap joints. Nonferrous Met Mater Eng. 2019;40(01):13–19.
3. 10.1016/j.matdes.2004.04.00210.1016/j.matdes.2004.04.002 ↗
4. 10.1016/j.msea.2012.06.07610.1016/j.msea.2012.06.076 ↗
5. 10.1016/j.jallcom.2017.04.27210.1016/j.jallcom.2017.04.272 ↗
6. 10.1007/s11661-016-3428-410.1007/s11661-016-3428-4 ↗
7. Geng PH, Morimura M, Ma H, et al. Elucidation of intermetallic compounds and mechanical properties of dissimilar friction stir lap welded 5052 Al alloy and DP590 steel. J Alloy Compd. 2022;906:164381.
8. 10.1007/s00170-015-7531-210.1007/s00170-015-7531-2 ↗
9. 10.1080/02670836.2023.220799210.1080/02670836.2023.2207992 ↗
10. 10.3390/met1208137610.3390/met12081376 ↗
11. 10.1002/adem.20080002810.1002/adem.200800028 ↗
12. Liu GQ, Wang YC, Huang XF, et al. Status and prospect of steel/aluminium heterogeneous metal laser welding research. Weld Technol. 2022;51(12):10–16.
13. 10.1007/s00170-018-2854-410.1007/s00170-018-2854-4 ↗
14. 10.1007/s11740-017-0712-010.1007/s11740-017-0712-0 ↗
15. Selvakumaran T, Gururaj HD, et al. Mechanicalproperties of 304 stainless steel plates and friction stir welded Al 2219 alloy. Mater Today. 2022;59(P2):1388–1393.
16. Mrinal S, Subhas G. Distribution of intermetallic compounds in dissimilar joint interface of AA 5083 and HSLA steel welded by FSW technique. Intermetallic. 2022;151:107734.
17. 10.1016/j.scriptamat.2011.12.03510.1016/j.scriptamat.2011.12.035 ↗
18. 10.1179/174328407X24850510.1179/174328407X248505 ↗
19. 10.1016/j.matlet.2016.08.10210.1016/j.matlet.2016.08.102 ↗
20. 10.1007/s11661-014-2424-910.1007/s11661-014-2424-9 ↗
21. 10.1016/j.msea.2015.11.06410.1016/j.msea.2015.11.064 ↗
22. Reza J, Reza HJ, Rasoul K, et al. Effect of FSW process parameters on microstructure and mechanical properties of the dissimilar AA2024 Al alloy and 304 stainless steel joints. Mat Sci Eng A. 2021;814:140981.
23. 10.1016/j.matdes.2016.05.10110.1016/j.matdes.2016.05.101 ↗
24. 10.1016/j.matdes.2014.02.00310.1016/j.matdes.2014.02.003 ↗
25. 10.1016/j.jmst.2014.04.00910.1016/j.jmst.2014.04.009 ↗
26. 10.1007/s00170-015-7390-x10.1007/s00170-015-7390-x ↗
27. 10.1016/j.jallcom.2016.06.09210.1016/j.jallcom.2016.06.092 ↗
28. Li Z, Shi Y, Liu J, et al. Effect of nickel plating layer on laser welding quality of aluminum/steel dissimilar metals. Applied Laser. 2016;36(03):316–320.
29. Gao PY, Xu HB, Li MY, et al. Research on friction stir welding of steel and aluminum matrix composites under Zn intermediate layer. Hot Process Technol. 2019;48(03):66–69.
30. 10.1007/s42243-023-00958-w10.1007/s42243-023-00958-w ↗
31. Ma XT, Yan DJ, Meng XC, et al. Advances in the regulation of intermetallic compounds in aluminum/steel stir friction welding. J Weld. 2020;41(07):1–11.
32. Zheng B, Zhao L, Dong SJ, et al. First principles study on Mg-Al intermetallic compounds. Mater Rep. 2019;33(14):2426–2430.