journal article·2020-10-01

The bond and flexural strengthening of reinforced concrete elements strengthened with near surface mounted prestressing steel (PS) bars

Oualid Sadoun, Abdelghani Merdas, Abdellah Douadi

Publisher page

Abstract

The main objective of this work is to study the performance of prestressing steel (PS) bars as reinforcements in the reinforced concrete (RC) elements strengthened by the near-surface mounted method (NSM). The work includes two parts. In the first part, direct pull-out tests are performed in order to study the bond performance between PS reinforcement and concrete. The influences of groove sizes and PS surface conditions (smooth and sand coated) are evaluated. The results show that the sand coated PS (PS-Sc) reinforcement has the best adhesion behavior compared with the smooth bar, and its pull-out force is increased by 48%. For this reason, the PS-Sc bars are used in the second part of this work as NSM reinforcement to strengthen RC beams subjected to bending forces. Then, four-point bending tests are carried out to understand the flexural behavior of strengthened RC beams with PS-Sc reinforcements of different lengths and ratios. The obtained results demonstrate that the use of NSM-PS-Sc bars strengthening technique leads to important enhancement in the load carrying capacity of the RC beams. The first crack load and ultimate load of the strengthened RC beams attain 71.41 and 65.67%, respectively, which are higher than those of the control beam. Furthermore, the experimental values show a good agreement with the analytical values in both the ultimate deflection and the ultimate load. This proves that the NSM-PS-Sc bars studied in this work are promising reinforcement of the RC beams.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Research Unit on Emerging Materials (RUEM), Department of Civil Engineering, University Ferhat Abbas Setif 1, Setif, Algeria

References (51)

Show source-provided references
1. 10.1139/l00-03110.1139/l00-031 ↗
2. 10.1061/(ASCE)1090-0268(2004)8:2(173)10.1061/(ASCE)1090-0268(2004)8:2(173) ↗
3. 10.1016/j.compositesb.2015.01.02210.1016/j.compositesb.2015.01.022 ↗
4. 10.1016/j.compstruct.2014.12.04610.1016/j.compstruct.2014.12.046 ↗
5. 10.1163/15685610074245610.1163/156856100742456 ↗
6. 10.3390/ma807413110.3390/ma8074131 ↗
7. 10.1016/j.conbuildmat.2009.03.00510.1016/j.conbuildmat.2009.03.005 ↗
8. Kreit A. Prolongation de la durée de vie des ouvrages en béton armé [PhD Thesis]. Toulouse (France): INSA; 2012.
9. 10.1080/01694243.2016.114070310.1080/01694243.2016.1140703 ↗
10. 10.1016/j.compositesb.2006.08.00310.1016/j.compositesb.2006.08.003 ↗
11. Abdel WN. Bond behaviour of beams reinforced with near surface mounted carbon fibre reinforced polymer rods under fatigue loading [PhD Thesis]. Waterloo (Canada): University of Waterloo; 2011.
12. 10.1080/01694243.2016.120474110.1080/01694243.2016.1204741 ↗
13. 10.1016/j.cemconcomp.2007.04.01010.1016/j.cemconcomp.2007.04.010 ↗
14. 10.1016/j.compositesb.2011.10.01710.1016/j.compositesb.2011.10.017 ↗
15. 10.1061/(ASCE)CC.1943-5614.000031810.1061/(ASCE)CC.1943-5614.0000318 ↗
16. 10.1177/073168441557381410.1177/0731684415573814 ↗
17. 10.1016/j.proeng.2017.06.23010.1016/j.proeng.2017.06.230 ↗
18. 10.1080/01694243.2019.159294410.1080/01694243.2019.1592944 ↗
19. 10.1061/(ASCE)1090-0268(2006)10:2(92)10.1061/(ASCE)1090-0268(2006)10:2(92) ↗
20. 10.1016/j.compstruct.2009.04.04010.1016/j.compstruct.2009.04.040 ↗
21. 10.1016/j.compstruct.2008.05.01610.1016/j.compstruct.2008.05.016 ↗
22. 10.1016/j.compstruct.2013.10.05110.1016/j.compstruct.2013.10.051 ↗
23. 10.3390/polym803006710.3390/polym8030067 ↗
24. 10.1016/j.aej.2016.01.03310.1016/j.aej.2016.01.033 ↗
25. 10.1016/j.engstruct.2010.09.01710.1016/j.engstruct.2010.09.017 ↗
26. 10.1016/j.compstruct.2010.03.00910.1016/j.compstruct.2010.03.009 ↗
27. 10.1016/j.compstruct.2016.12.04410.1016/j.compstruct.2016.12.044 ↗
28. 10.1016/j.compstruct.2016.03.01810.1016/j.compstruct.2016.03.018 ↗
29. 10.1016/j.compstruct.2019.11175110.1016/j.compstruct.2019.111751 ↗
30. Fathuldeen SW · Struct Eng Mech · 2019 · 70 · 67
31. 10.1016/j.compstruct.2018.05.12610.1016/j.compstruct.2018.05.126 ↗
32. 10.1016/j.compstruct.2020.11205910.1016/j.compstruct.2020.112059 ↗
33. 10.1016/j.conbuildmat.2016.04.15210.1016/j.conbuildmat.2016.04.152 ↗
34. 10.1016/j.matdes.2015.06.03510.1016/j.matdes.2015.06.035 ↗
35. 10.1002/suco.20170009910.1002/suco.201700099 ↗
36. Deux G · 1998
37. NF P18-406. Essai de compression [Compression test]; 1981. French.
38. NF P18-408. Essai de traction [Tensile test]; 1981. French.
39. EN 10002. Metallic materials-tensile testing part1: method of test at ambient, 2001.
40. Trefisoud company: Societe de Trefilage et de Fabrication des produits de Soudage [A company specializing in Trefiling and manufacture of Welding products] [Internet]. Algiers (Algeria): Trefisoud; [cited 2019 Dec 16]. Available from: https://www.trefisoud.com/index1.html.
41. Sika AG. Sikadur® 330. Resin Epoxy of Impregnation for Tissue of Strengthening. Available from: www.sika.com
42. 10.1016/S1359-8368(02)00052-510.1016/S1359-8368(02)00052-5 ↗
43. 10.1016/j.engstruct.2014.11.03910.1016/j.engstruct.2014.11.039 ↗
44. BAEL. Règle technique de conception et de calcul des ouvrage et constructions en béton armé suivant la méthode des états limites [BAEL (1992) :technical rule for the design and calculation of reinforced concrete structures and structures according to the limit state method], French Concrete Code Eyrolles ed. 1992 (in French)
45. Hassan T · ACI Struct J · 2004 · 101 · 830
46. 10.1016/j.compositesb.2018.08.09110.1016/j.compositesb.2018.08.091 ↗
47. 10.1016/j.compstruct.2019.11171610.1016/j.compstruct.2019.111716 ↗
48. 10.1016/j.compstruct.2010.01.00210.1016/j.compstruct.2010.01.002 ↗
49. 10.1016/j.conbuildmat.2016.10.07710.1016/j.conbuildmat.2016.10.077 ↗
50. 10.1016/j.conbuildmat.2015.01.01310.1016/j.conbuildmat.2015.01.013 ↗
51. BSI (British Standards Institution) (2004), BS EN 1992-1-1:2004: Eurocode 2: Design of concrete structures: part 1–1: General rules and rules for buildings.