journal article·2026-02

Enhancing hardness in SMAW welded joints with low-frequency vibration assistance: an experimental and analytical study

Rajeev Ranjan, Sanjay Kumar Jha, Ajay Kumar

Publisher page

Abstract

Vibration assisted welding has gained popularity over the years for creating high quality welds and achieving better mechanical properties. The main objective of this research is to use low frequency vibration-assisted welding to optimise the process parameters. This study uses a novel vibratory technique to vibrate the workpiece during shielded metal arc welding at frequencies ranging from 0 to 100 Hz in order to examine the hardness of mild steel plates butt-welded to a thickness of 5 mm. Taguchi Methodology has been applied to optimise the hardness of welded specimens by varying the input variables viz. Current, vibration duration, and vibration frequency. Additionally, the microstructure of welded mild steel plates has been studied using SEM, optical micrographs, and XRD analysis. Results indicated that a low heat input of 80 Amp frequency of vibration of 100 Hz, and duration of vibration of 100 sec demonstrated optimum performance in terms of hardness of welded MS plates. Frequency of vibration has been found to be the most important parameter determining the hardness of the welded joint. Maximum hardness of 97.1643RHN has been found at optimal parameters. As the weld pool is being excited, vibration-assisted welded butt joints exhibit a finer grain structure, suggesting higher hardness values.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Production and Industrial Engineering, Birla Institute of Technology Mesra

Department of Mechanical Engineering, School of Engineering & Technology, JECRC University

References (46)

Show source-provided references
1. Krajewski A. Welding processes supported by mechanical vibration. Science Bulletin. 2009;:33–51.
2. 10.1007/s00521-016-2496-010.1007/s00521-016-2496-0 ↗
3. 10.1016/j.jmatprotec.2010.02.01310.1016/j.jmatprotec.2010.02.013 ↗
4. 10.2478/v10175-012-0098-210.2478/v10175-012-0098-2 ↗
5. 10.1016/j.ijmachtools.2009.06.01410.1016/j.ijmachtools.2009.06.014 ↗
6. 10.1016/j.msea.2018.02.09610.1016/j.msea.2018.02.096 ↗
7. 10.1016/j.optlastec.2018.07.01510.1016/j.optlastec.2018.07.015 ↗
8. 10.1016/j.jajp.2022.10012910.1016/j.jajp.2022.100129 ↗
9. 10.1007/s11665-021-06362-310.1007/s11665-021-06362-3 ↗
10. 10.1177/095440541453124810.1177/0954405414531248 ↗
11. Victor AD. Impact of low frequency vibration during welding and annealing on microstructure of mild steel butt-welded joints. Modern Approach Mater Sci. 2020;:366–373.
12. 10.1007/s00170-013-5350-x10.1007/s00170-013-5350-x ↗
13. 10.17485/ijst/2016/v9i35/9284610.17485/ijst/2016/v9i35/92846 ↗
14. 10.1108/WJE-11-2019-033310.1108/WJE-11-2019-0333 ↗
15. 10.1080/13621718.2023.216560310.1080/13621718.2023.2165603 ↗
16. 10.1117/12.58240810.1117/12.582408 ↗
17. 10.1016/j.matdes.2019.10789810.1016/j.matdes.2019.107898 ↗
18. 10.3390/ma1513450710.3390/ma15134507 ↗
19. 10.1080/01694243.2023.222746110.1080/01694243.2023.2227461 ↗
20. 10.2355/isijinternational.39.80910.2355/isijinternational.39.809 ↗
21. 10.1007/s13198-021-01107-w10.1007/s13198-021-01107-w ↗
22. 10.18280/acsm.43040910.18280/acsm.430409 ↗
23. 10.1088/1757-899X/377/1/01204910.1088/1757-899X/377/1/012049 ↗
24. 10.1016/S0924-0136(98)00195-210.1016/S0924-0136(98)00195-2 ↗
25. 10.1109/ULTSYM.2008.052810.1109/ULTSYM.2008.0528 ↗
26. 10.1016/j.jmatprotec.2006.11.16810.1016/j.jmatprotec.2006.11.168 ↗
27. 10.1016/s0041-624x(02)00245-710.1016/s0041-624x(02)00245-7 ↗
28. 10.1080/0022234080240345310.1080/00222340802403453 ↗
29. 10.1016/j.jmatprotec.2007.01.01210.1016/j.jmatprotec.2007.01.012 ↗
30. Dahl W. Fracture toughness testing of metallic materials. Encyclop Mater Sci Tech (Second Edition). 2001;:3336–3340.
31. Gao JZ. Low-frequency vibration welding of mild steel with improved mechanical properties. Mater Res Express. 2020.
32. 10.1016/j.measurement.2019.10692410.1016/j.measurement.2019.106924 ↗
33. 10.1088/1742-6596/1240/1/01207810.1088/1742-6596/1240/1/012078 ↗
34. 10.1080/03019233.2019.162359210.1080/03019233.2019.1623592 ↗
35. 10.1007/s12008-023-01674-110.1007/s12008-023-01674-1 ↗
36. 10.1051/mfreview/201902010.1051/mfreview/2019020 ↗
37. 10.1016/j.measurement.2018.08.07810.1016/j.measurement.2018.08.078 ↗
38. 10.1155/2018/723961810.1155/2018/7239618 ↗
39. 10.1007/s12206-017-0446-010.1007/s12206-017-0446-0 ↗
40. 10.1016/S1003-6326(15)63959-010.1016/S1003-6326(15)63959-0 ↗
41. 10.1177/009524431142599810.1177/0095244311425998 ↗
42. 10.1007/s12206-015-0931-210.1007/s12206-015-0931-2 ↗
43. 10.1016/j.jmapro.2018.06.02910.1016/j.jmapro.2018.06.029 ↗
44. But DM. Effect of welding techniques (GTAW & SMAW) on the microstructure & mechanical properties of mild steel SA 516 Gr. 70. Electric Engng. 2009;6:35–40.
45. 10.1016/j.jmapro.2017.02.02710.1016/j.jmapro.2017.02.027 ↗
46. 10.1016/j.matpr.2022.05.37710.1016/j.matpr.2022.05.377 ↗