Peel Behaviour of Aircraft Fuel Tank Sealants: the Effect of Peel Angle, Sealant Layer Thickness and Peel Rate
Source abstract
Abstract
The peel performance of two aircraft fuel tank sealants was comprehensively investigated by means of a modified peel specimen previously developed. Experiments were carried out at five different peel angles in the range from 90 to 180° using seven sealant layer thicknesses in the range from 0.1 to 5 mm. The effect of the peel rate was also investigated at a fixed peel angle and sealant layer thickness. The results were analysed in terms of the peel energy. Both peel angle and sealant layer thickness were found to affect significantly the measured peel energy of the sealants in a coupled way. In particular, it was found that the peel energy increased linearly with the sealant layer thickness, for the range considered in this study, and the rate of this increase was also found to increase as the peel angle was varied from 90 to 180°. For very small sealant layer thicknesses (0.1 mm) there was no effect of the peel angle on the measured peel energy. The results were explained in terms of the amount of energy these materials dissipated upon deformation up to fracture and a relationship for the prediction of the peel energy was proposed. The peel rate was found to affect only slightly the measured peel energy, in the range studied.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Silicone and Siloxane Chemistry · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
a Department of Mechanical Engineering, University of Bristol, Queen's Building, University Walk, Bristol BS8 1TR, UK;, Email: sgiannis@merl-ltd.co.uk
b Department of Mechanical Engineering, University of Bristol, Queen's Building, University Walk, Bristol BS8 1TR, UK
c Airbus, New Filton House, Filton, Bristol BS99 7AR, UK
d Airbus, New Filton House, Filton, Bristol BS99 7AR, UK
References (34)
Show source-provided references
1. 2002
2. Adams R. D. · 1997
3. 10.1122/1.54886810.1122/1.548868 ↗
4. 10.1122/1.54933310.1122/1.549333 ↗
5. 10.1080/0021846750807504110.1080/00218467508075041 ↗
6. Nicholson D. W. · Int. J. Fracture · 1977 · 13 · 27910.1007/BF00040144 ↗
7. 10.1080/0021846810807119410.1080/00218468108071194 ↗
8. 10.1080/0021846820807319010.1080/00218468208073190 ↗
9. 10.1002/pen.76017070810.1002/pen.760170708 ↗
10. 10.5254/1.353525410.5254/1.3535254 ↗
11. 10.1002/pol.1975.18013110610.1002/pol.1975.180131106 ↗
12. 10.1002/pol.1978.18016030410.1002/pol.1978.180160304 ↗
13. 10.1007/BF0001263510.1007/BF00012635 ↗
14. 10.1520/JTE10421J10.1520/JTE10421J ↗
15. 10.1520/JTE11998J10.1520/JTE11998J ↗
16. 10.1016/0020-7683(88)90071-610.1016/0020-7683(88)90071-6 ↗
17. 10.1016/j.ijadhadh.2007.06.00210.1016/j.ijadhadh.2007.06.002 ↗
18. 10.1016/S0143-7496(03)00002-210.1016/S0143-7496(03)00002-2 ↗
19. 10.1016/S0143-7496(97)00026-210.1016/S0143-7496(97)00026-2 ↗
20. 10.1080/0360255820806773010.1080/03602558208067730 ↗
21. Petrie E. M. · 1999
22. 1993. ASTM C794
23. 2004. ASTM D3167
24. 10.1098/rspa.1969.008510.1098/rspa.1969.0085 ↗
25. 10.1002/pol.1955.12018880310.1002/pol.1955.120188803 ↗
26. 10.1163/156856196X0066110.1163/156856196X00661 ↗
27. Cutts , E. 1981.Developments in Adhesives-2, Edited by: Kinloch , A. J. 367–404. Essex, UK: Applied Science Publishers.
28. 10.1080/0021846030955510.1080/00218460309555 ↗
29. ICPeel 2006 Spreadsheet. Available athttp://www3.imperial.ac.uk/meadhesion/testprotocols/peel
30. Giannis S. · 2006
31. 10.1080/0021846950800993810.1080/00218469508009938 ↗
32. 10.1016/S0143-7496(97)00024-910.1016/S0143-7496(97)00024-9 ↗
33. Jarosz R. · 1999
34. 10.1520/STP16059S10.1520/STP16059S ↗