Scratch adhesion and wear failure characteristics of PVD multilayer CrTi/CrTiN thin film ceramic coating deposited on AA7075-T6 aerospace alloy
Source abstract
Abstract
This study highlights the scratch adhesion failure characterization and tribo-mechanical properties of physical vapor deposited (Cr, Ti) N coating on AA7075-T6 by using magnetron-sputtering technique. The surface morphology, microstructure and chemical composition of CrTi/CrTiN film were inspected by an optical microscope, scanning electron microscope (SEM) incorporated with energy dispersive X-ray spectroscopy (EDX) in addition to focused ion beam milling. The coating to substrate critical load of about 1261 mN was obtained, by employing coating deposition parameters of; DC power (300 W, RF power (200 W)), temperature (300 °C) and nitrogen flow rate (6%). Failure adhesion characteristics exhibited initial arc-tensile cracking followed by chipping and spallation that led to complete coating failure at Lc3. The tribo-mechanical aspects were evaluated by a pin-on-plate reciprocating testing unit, which showed a lower friction coefficient of 0.36 for CrTiN as compared with 0.43 for AA7075-T6. Subsequently, the wear depth was also reduced from 9.5 to 5.9 μm. It was revealed that the wear mechanism for AA7075-T6 was extensive deformation, abrasion and delamination, while the CrTiN exhibited slightly oxidative abrasive wear mode.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Mechanical Engineering, Universiti Malaysia Pahang, Pekan, Pahang, Malaysia
Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia
Funding
University of Malaya
References (34)
Show source-provided references
1. 10.1016/j.ijfatigue.2006.01.00210.1016/j.ijfatigue.2006.01.002 ↗
2. 10.1080/01694243.2016.124870410.1080/01694243.2016.1248704 ↗
3. 10.1080/01694243.2015.107585710.1080/01694243.2015.1075857 ↗
4. 10.1016/j.wear.2017.03.02010.1016/j.wear.2017.03.020 ↗
5. 10.1016/j.surfcoat.2016.10.08710.1016/j.surfcoat.2016.10.087 ↗
6. 10.4028/www.scientific.net/AMR.287-29010.4028/www.scientific.net/AMR.287-290 ↗
7. 10.1016/j.surfcoat.2015.11.04010.1016/j.surfcoat.2015.11.040 ↗
8. 10.3103/S106836661403006410.3103/S1068366614030064 ↗
9. 10.1016/j.apsusc.2007.02.06110.1016/j.apsusc.2007.02.061 ↗
10. 10.1016/S0301-679X(97)00012-110.1016/S0301-679X(97)00012-1 ↗
11. 10.1016/j.apsusc.2015.08.19410.1016/j.apsusc.2015.08.194 ↗
12. 10.1016/S1002-0721(16)60061-310.1016/S1002-0721(16)60061-3 ↗
13. 10.1016/S0043-1648(00)00488-910.1016/S0043-1648(00)00488-9 ↗
14. 10.1179/1751584X13Y.000000003710.1179/1751584X13Y.0000000037 ↗
15. 10.1016/j.surfcoat.2016.07.10910.1016/j.surfcoat.2016.07.109 ↗
16. 10.1016/j.triboint.2010.12.00210.1016/j.triboint.2010.12.002 ↗
17. 10.1016/S0257-8972(98)00840-810.1016/S0257-8972(98)00840-8 ↗
18. Bunshah RF. Handbook of Hard Films. New York (NY): Noyes; 2001. p. 17–21.
19. 10.1016/j.surfcoat.2011.07.04810.1016/j.surfcoat.2011.07.048 ↗
20. 10.1016/0921-5093(91)90482-310.1016/0921-5093(91)90482-3 ↗
21. 10.1016/S0257-8972(97)00682-810.1016/S0257-8972(97)00682-8 ↗
22. 10.1016/j.tsf.2017.07.04910.1016/j.tsf.2017.07.049 ↗
23. 10.1016/j.compositesb.2013.08.07310.1016/j.compositesb.2013.08.073 ↗
24. 10.4028/www.scientific.net/AMR.625.30110.4028/www.scientific.net/AMR.625.301 ↗
25. 10.1080/17515831.2016.120410610.1080/17515831.2016.1204106 ↗
26. 10.1016/0301-679X(76)90047-510.1016/0301-679X(76)90047-5 ↗
27. 10.1243/13506500276235528010.1243/135065002762355280 ↗
28. 10.1016/S1003-6326(09)60148-510.1016/S1003-6326(09)60148-5 ↗
29. 10.1016/j.triboint.2009.12.03210.1016/j.triboint.2009.12.032 ↗
30. 10.1016/0043-1648(87)90180-310.1016/0043-1648(87)90180-3 ↗
31. 10.1016/S0043-1648(00)00460-910.1016/S0043-1648(00)00460-9 ↗
32. 10.1007/s40516-016-0025-810.1007/s40516-016-0025-8 ↗
33. 10.1080/10402004.2016.115889110.1080/10402004.2016.1158891 ↗
34. 10.1016/S0040-6090(98)00840-210.1016/S0040-6090(98)00840-2 ↗