Fracture aspects of adhesive joints: material, fatigue, interphase, and stress concentration considerations
Source abstract
Abstract
—The effects of secondary material phases added or created in the adhesive bulk during processing ; changes in joint material properties due to processing and adhesion (interphase properties) and/or loading, including fatigue loading; and effect of interphase material properties on overlap edge stress concentrations are considered in this paper in relation to the fracture behavior of adhesive joints. A theoretical discussion is provided on each of these issues along with specific examples and experimental and/or calculated data. The experimental data discussed were obtained using bulk specimens (material considerations), independently loaded mixed-mode specimens (ILMMS) (fatigue/fracture considerations), and single fiber fragmentation specimens (interphase considerations and its effect on the overlap edge stress concentration). Cause-effect relations between the above-mentioned fracture issues are highlighted as permitted by the data and the analytical models presented.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Sancaktar, E. and Brinson, H. F. 1980.Adhesion and Adsorption of Polymers, Edited by: Lee, L. H. Vol. A, 279New York: Plenum Press.10.1007/978-1-4613-3093-6_18 ↗
2. Sancaktar E. · J. Adhesion · 1983 · 15 · 24110.1080/00218468308073230 ↗
3. Jozavi H. · J. Adhesion · 1985 · 18 · 2510.1080/00218468508074935 ↗
4. Sancaktar, E. and Turgut, A. 1991.1st Canadian International Composites Conference and Exhibition Pre- Prints, 1F2–1. Canadian Association for Composite Structures and Materials.
5. O'Conner D. G. · 1979
6. Chen N. N. S. · J. Adhesion · 1987 · 21 · 11510.1080/00218468708074962 ↗
7. Adams R. D. · 198410.1007/978-94-009-5616-2 ↗
8. Bannantine J. A. · 1990
9. Lees W. A. · 198410.1007/978-3-662-11032-4 ↗
10. Sancaktar, E. and Tang, J. 1987.Proceedings of Adhesion '87, 18London: Plastics and Rubber Institute.
11. Sancaktar, E. 1987.Proceedings of the Fifth International Joint Government—Industry Symposium on Structural Adhesive Bonding, 120Arlington, VA: American Defense Preparedness Association.
12. Sancaktar, E. 1987.Mechanical Behavior of Adhesive Joints, Edited by: Verchery, G. and Cardon, A. H. 351Paris: Editors Pluralis.
13. Johnson W. S. · 1985
14. Johnson W. S. · 1983
15. Mall, S., Johnson, W. S. and Everett, R. A. Jr. 1984.Adhesive Joints: Formation, Characteristics and Testing, Edited by: Mittal, K. L. 639New York: Plenum Press.10.1007/978-1-4613-2749-3_38 ↗
16. Mall, S. and Johnson, W. S. 1986.Composite Materials, Testing and Design, 7th Conference, ASTM STP 893 322Philadelphia, PA: ASTM.
17. Sancaktar E. · J. Adhesion · 1987 · 23 · 23310.1080/00218468708075409 ↗
18. Kinloch, A. J. and Shaw, S. J. 1981.Development in Adhesives — 2, Edited by: Kinloch, A. J. 83Englewood, NJ: Applied Science Publishers.
19. Ripling, E. J., Mostovoy, S. and Patrick, R. L. 1963.Adhesion, ASTM STP 360 5Philadelphia, PA: ASTM.10.1520/STP44560S ↗
20. Sancaktar, E. 1990.Engineered Materials Handbook, Vol. 3: Adhesives and Sealants, 501Ohio: ASM International Materials Park.
21. Sancaktar, E. 1993.Reliability, Stress Analysis, and Failure Prevention - 1993, Edited by: Schaller, R. J. 111New York: ASME.10.1115/DETC1993-0067 ↗
22. Sancaktar E. · ASME Trans. J. Mech. Design · 1989 · 112 · 60510.1115/1.2912653 ↗
23. Drzal, L. T., Rich, M. J. and Hall, D. L. 1981. Paper presented at the American Carbon Society, 15th Biennial Conference on Carbon. June1981.
24. Broek D. · 1983
25. Sancaktar E. · Appl. Mech. Rev. · 1987 · 40 · 139310.1115/1.3149541 ↗
26. Sancaktar E. · J. Adhesion · 1992 · 38 · 9110.1080/00218469208031269 ↗
27. Kelley A. · Mech. Phys. Solids · 1965 · 13 · 32910.1016/0022-5096(65)90035-9 ↗
28. Greenwood, L. 1969.Aspects of Adhesion, Edited by: Alner, D. J. Vol. 5, 40Boca Raton, FL: CRC Press.
29. Gol M. · J. Appl. Mech. · 1944 · 77 · 17
30. Schenck S. C. · 1983
31. Mall S. · 1982
32. St. Clair T. L. · 1982