Estimation of fracture behavior of CFRP/CFRP adhesively bonded joints under mixed-mode conditions using a cohesive zone model
Source abstract
Abstract
Finite element (FE) simulations of adhesively bonded composite joints were conducted using the cohesive zone model (CZM). To clarify the effect of fracture criteria on the accuracy of the CZM simulation, two types of mixed-mode criteria including the linear summation model of Modes I and II energy release rates, GI/GIC+GII/GIIC=1, and the nonlinear power-law, (GI/GIC)n+(GII/GIIC)n=1 , were employed. A CZM formulation using the power-law fracture criterion was developed in this study. The load–displacement curves calculated by the two models were compared with the experimental results obtained from mixed-mode Fernlund–Spelt-type double cantilever beam tests, and the Mode II end-notched flexure (ENF) tests. Calculations using the nonlinear fracture criterion were closer to the experimental results. Consequently, it is concluded that nonlinear fracture modeling is of vital importance for accurate strength analysis of mixed-mode adhesive joints.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Western Region Industrial Research Center, Hiroshima Prefectural Technology Research Institute, Hiroshima, Japan
Department of Technology Education, Osaka Kyoiku University, Osaka, Japan
Department of Advanced Science and Engineering, Hiroshima University, Hiroshima, Japan
Department of Mechanical Engineering, Keio University, Yokohama, Japan
Institute of Engineering, Hiroshima University, Hiroshima, Japan
References (32)
Show source-provided references
1. 10.1016/j.ijadhadh.2008.09.00310.1016/j.ijadhadh.2008.09.003 ↗
2. 10.1016/j.ijsolstr.2011.10.00110.1016/j.ijsolstr.2011.10.001 ↗
3. 10.1016/j.ijadhadh.2013.02.00610.1016/j.ijadhadh.2013.02.006 ↗
4. 10.1016/j.compstruct.2016.05.03410.1016/j.compstruct.2016.05.034 ↗
5. 10.1016/j.compstruct.2016.03.00910.1016/j.compstruct.2016.03.009 ↗
6. 10.1016/j.ijadhadh.2017.04.00210.1016/j.ijadhadh.2017.04.002 ↗
7. 10.1016/j.ijadhadh.2017.10.00810.1016/j.ijadhadh.2017.10.008 ↗
8. 10.1016/j.ijadhadh.2019.10249310.1016/j.ijadhadh.2019.102493 ↗
9. 10.1016/j.ijadhadh.2019.10242110.1016/j.ijadhadh.2019.102421 ↗
10. 10.1016/j.ijadhadh.2022.10323210.1016/j.ijadhadh.2022.103232 ↗
11. 10.1016/j.ijadhadh.2022.10329810.1016/j.ijadhadh.2022.103298 ↗
12. 10.1016/j.compstruct.2020.11263910.1016/j.compstruct.2020.112639 ↗
13. 10.1016/j.ijadhadh.2020.10271010.1016/j.ijadhadh.2020.102710 ↗
14. 10.1080/0021846090288031310.1080/00218460902880313 ↗
15. 10.1016/j.ijmecsci.2022.10706310.1016/j.ijmecsci.2022.107063 ↗
16. 10.1016/j.compstruct.2022.11552810.1016/j.compstruct.2022.115528 ↗
17. 10.1016/j.ijadhadh.2021.10285410.1016/j.ijadhadh.2021.102854 ↗
18. 10.1016/j.ijadhadh.2018.05.01110.1016/j.ijadhadh.2018.05.011 ↗
19. 10.1016/j.ijadhadh.2020.10268210.1016/j.ijadhadh.2020.102682 ↗
20. 10.1016/j.tafmec.2022.10334710.1016/j.tafmec.2022.103347 ↗
21. 10.1016/j.compstruct.2020.11337410.1016/j.compstruct.2020.113374 ↗
22. 10.1080/01694243.2017.129132010.1080/01694243.2017.1291320 ↗
23. 10.1016/j.ijsolstr.2007.10.00310.1016/j.ijsolstr.2007.10.003 ↗
24. 10.1080/00218464.2014.90191210.1080/00218464.2014.901912 ↗
25. 10.1016/j.engfracmech.2013.05.00810.1016/j.engfracmech.2013.05.008 ↗
26. 10.1016/j.ijadhadh.2020.10276210.1016/j.ijadhadh.2020.102762 ↗
27. 10.1016/j.ijsolstr.2008.12.00110.1016/j.ijsolstr.2008.12.001 ↗
28. 10.1016/j.engfracmech.2006.01.00410.1016/j.engfracmech.2006.01.004 ↗
29. 10.1016/j.ijmecsci.2018.09.02910.1016/j.ijmecsci.2018.09.029 ↗
30. 10.1016/j.compscitech.2022.10931510.1016/j.compscitech.2022.109315 ↗
31. 10.1016/j.tafmec.2016.08.01810.1016/j.tafmec.2016.08.018 ↗
32. 10.1016/j.compstruct.2023.11707810.1016/j.compstruct.2023.117078 ↗