Resistance welding of thermoplastics by carbon nanotube-grafted heating element
Source abstract
Abstract
The surface of stainless-steel (SS) mesh was modified by growing carbon nanotubes (CNTs) from ethanol flame. The CNT-modified SS mesh was then used as a heating element for the resistance welding of glass-fibre-reinforced polyetherimide (GF/PEI) laminates to improve the interfacial bond strength of SS wire and PEI resin. Interfacial microstructure, the mechanical properties of the welded joint and the effects of CNT growth time (tg) on the wettability of PEI resin solution to SS wire were investigated. The results indicate that the addition of CNTs increased wettability due to the capillary action of high-porosity CNT coating. The microstructure of the welded joints changed with tg, and the thickness of the welding implant layer decreased below tg = 10 min, and the maximum single lap shear strength (SLSS) value of the welded joint was 39.2 MPa when tg = 10 min. The strengthening mechanism of CNTs and the failure modes of the welded joints were also elucidated in detail by the interfacial shear strength (IFSS) between SS wire, PEI resin and the fractography analysis.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Fiber-reinforced polymer composites · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Liaoning Key Laboratory of Advanced Polymer Matrix Composites, Shenyang Aerospace University, Shenyang, China
Civil Aviation College, Shenyang Aerospace University, Shenyang, China
State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, China
References (37)
Show source-provided references
1. 10.1016/j.jmapro.2017.07.02410.1016/j.jmapro.2017.07.024 ↗
2. 10.1016/j.ijadhadh.2017.03.01210.1016/j.ijadhadh.2017.03.012 ↗
3. 10.1016/j.ijadhadh.2016.10.01010.1016/j.ijadhadh.2016.10.010 ↗
4. 10.1177/089270570404518710.1177/0892705704045187 ↗
5. 10.1177/089270571245603110.1177/0892705712456031 ↗
6. 10.5028/jatm.2012.04030391210.5028/jatm.2012.040303912 ↗
7. Offringa A. · JEC Composion Magement · 2010 · 58 · 45
8. 10.1179/174328909X38784710.1179/174328909X387847 ↗
9. 10.1243/09544100JAERO51510.1243/09544100JAERO515 ↗
10. 10.1016/S1359-835X(04)00182-410.1016/S1359-835X(04)00182-4 ↗
11. Kompozitov SN. · Mater Technol · 2016 · 50 · 655
12. 10.1007/s00170-011-3287-510.1007/s00170-011-3287-5 ↗
13. 10.1016/j.compositesa.2017.11.00310.1016/j.compositesa.2017.11.003 ↗
14. 10.1016/j.ijadhadh.2017.12.01810.1016/j.ijadhadh.2017.12.018 ↗
15. 10.1016/S0263-8223(00)00047-710.1016/S0263-8223(00)00047-7 ↗
16. 10.1016/j.proeng.2013.08.25610.1016/j.proeng.2013.08.256 ↗
17. 10.1007/s40194-018-0628-010.1007/s40194-018-0628-0 ↗
18. 10.1039/C5NR05537G10.1039/C5NR05537G ↗
19. 10.1016/j.carbon.2013.07.02910.1016/j.carbon.2013.07.029 ↗
20. 10.1016/j.compositesa.2011.08.00510.1016/j.compositesa.2011.08.005 ↗
21. 10.1016/j.compscitech.2017.06.00110.1016/j.compscitech.2017.06.001 ↗
22. 10.1016/j.compscitech.2016.07.01210.1016/j.compscitech.2016.07.012 ↗
23. 10.1016/j.carbon.2015.04.08110.1016/j.carbon.2015.04.081 ↗
24. 10.1007/s10853-010-5225-610.1007/s10853-010-5225-6 ↗
25. 10.1016/j.matdes.2015.07.09510.1016/j.matdes.2015.07.095 ↗
26. 10.1039/C4SC00543K10.1039/C4SC00543K ↗
27. 10.1080/1536383050053844110.1080/15363830500538441 ↗
28. 10.1016/j.carbon.2006.06.02510.1016/j.carbon.2006.06.025 ↗
29. 10.1016/j.carbon.2005.07.04310.1016/j.carbon.2005.07.043 ↗
30. 10.1021/jp803485210.1021/jp8034852 ↗
31. 10.1063/1.298748010.1063/1.2987480 ↗
32. 10.1002/app.4787910.1002/app.47879 ↗
33. 10.1016/0956-7143(92)90078-910.1016/0956-7143(92)90078-9 ↗
34. 10.1016/j.compscitech.2009.03.01210.1016/j.compscitech.2009.03.012 ↗
35. 10.1016/0008-6223(89)90062-610.1016/0008-6223(89)90062-6 ↗
36. 10.1016/S1359-6454(01)00352-410.1016/S1359-6454(01)00352-4 ↗
37. 10.1177/002199831141298610.1177/0021998311412986 ↗