Adhesives for On-Site Rehabilitation of Timber Structures
Source abstract
Abstract
The use of adhesives to produce assembled structural joints in the building industry is increasing, particularly in the context of on-site rehabilitation of timber structures. On their own or together with steel or fibre reinforced polymer composite connecting materials, adhesives can provide low intrusive, fast, versatile and effective on-site repair or reinforcement interventions to timber structures. Most common applications involve sealing and repair of cracks, drying fissures and delamination of glued laminated members; replacement of decayed beam ends; strengthening of timber members; and repair and strengthening of mechanical timber joints. The performance of bonded joints highly depends on their design and detailing, surfaces preparation, selection and application of adhesives, and full compliance with their cure schedule. Therefore, the work should be carried out by well-informed, trained and certified operators following a Quality Assurance Program to ensure satisfactory end-product strength and durability. Despite some recent developments, the exploitation of the full potential for on-site bonded joints is mainly restrained at present by the lack of structural design guidance, standards for durability assessment and onsite acceptance testing. This article discusses briefly the use of adhesives on the construction site in the context of structural repair and reinforcement; the requirements and practical difficulties in the work on site with regards to the strength and durability of the rehabilitated timber structure; and the consequent need for quality control. It also highlights the characteristics and requirements that must be fulfilled by structural adhesives and reinforcing materials; factors affecting performance and durability of bonded joints; and ways to improve adhesion and durability. Finally, it points out some research needs and future developments identified by the authors.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Antimicrobial agents and applications · Wood Treatment and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Mettem C. · Constr. Repair · 1996 · 10 · 23
2. Mettem C. · Constr. Repair · 1996 · 10 · 43
3. Broughton, J. G. and Custódio, J. 2009.ICE Manual of Construction Materials, Edited by: Forde, M. C. Vol. 2, 739–760. London: Thomas Telford Ltd.
4. 2006
5. 2009
6. 2009
7. Cruz, H., Custódio, J. and Smedley, D. 2006.Proceedings of the 3rd International Conference on High Performance Structures and Materials — HPSM 2006539–548. Ostend, Belgium
8. 1997
9. 2009
10. Blass H. J. · 1995
11. Blass H. J. · 1995
12. Dunky M. · 2008
13. Custódio J. · 2009
14. Wheeler A. S. · Int. J. Adhesion Adhesives · 1998 · 18 · 110.1016/S0143-7496(97)00060-2 ↗
15. Broughton J. G. · Construct. Build. Mater. · 2001 · 15 · 1710.1016/S0950-0618(00)00066-0 ↗
16. Custódio J. · Int. J. Adhesion Adhesives · 2009 · 29 · 17310.1016/j.ijadhadh.2008.03.002 ↗
17. Cruz H. · Int. J. Construlink · 2005 · 3 · 1
18. Cruz H. · 2006
19. Cruz, H. and Custódio, J. 2006.Proceedings of the 2° Encontro sobre Patologia e Reabilitação de Edifícios — PATORREB 2006 (2nd Symposium on Building Pathology and Rehabilitation)149–158. Porto, Portugal
20. Custódio J. · Ciência & Tecnologia dos Materiais · 2006 · 18 · 23
21. 1999
22. Custódio, J., Rodrigues, D., André, R., Ferreira, J. and Cruz, H. 2008.Proceedings of the COST Action E34 Final Conference on Bonding of Timber — Enhancing Bondline Performance20–30. Sopron, Hungary
23. Cruz, H., Custódio, J. and Machado, J. S. 2004.Proceedings of the 2° Congresso Nacional da Construção, Repensar a Construção — CONSTRUÇÃO 2004 (2nd National Construction Congress, Re-think Construction)907–912. Porto, Portugal
24. Custódio, J. and Broughton, B. 2008.Core Document of the COST Action E34 ‘Bonding of Timber, Edited by: Dunky, M., Källender, B., Properzi, M., Richter, K. and Leemput, M. V. 56–73. Vienna: University of Natural Resources and Applied Life Sciences.
25. Nguyen T. · Wood Sci. Technol. · 1979 · 13 · 2910.1007/BF00350173 ↗
26. Dimri M. P. · J. Timber Dev. Assoc. India · 1993 · 39 · 18
27. Manbeck H. B. · Wood Fiber. Sci. · 1995 · 27 · 239
28. Sellers T. · Forest Prod. J. · 1997 · 47 · 73
29. Vick C. B. · Forest Prod. J. · 1990 · 40 · 16
30. Vick C. B. · Wood Fiber. Sci. · 1992 · 24 · 36
31. Vick C. B. · Int. J. Adhesion Adhesives · 1993 · 13 · 13910.1016/0143-7496(93)90035-8 ↗
32. Vick C. B. · Wood Fiber. Sci. · 1993 · 25 · 77
33. Vick C. B. · Forest Prod. J. · 1997 · 47 · 83
34. Vick C. B. · Forest Prod. J. · 1995 · 45 · 78
35. Herzog B. · Forest Prod. J. · 2004 · 54 · 82
36. Kilmer W. R. · Wood Fiber. Sci. · 1998 · 30 · 175
37. Lisperguer J. H. · Forest Prod. J. · 2005 · 55 · 113
38. Tascioglu C. · Composites Sci. Technol. · 2003 · 63 · 97910.1016/S0266-3538(03)00013-7 ↗
39. Pizzi A. · 200310.1201/9780203912225 ↗
40. Allen K. W. · 1977 · 1
41. Thrall E. W. · 1985
42. Johnson W. S. · 198810.1520/STP981-EB ↗
43. Kinloch A. J. · 1983
44. Kinloch A. J. · 198710.1007/978-94-015-7764-9 ↗
45. 2003
46. 2003
47. 2003
48. 2005
49. 2006
50. Custódio J. · Int. J. Adhesion Adhesives · 2009 · 29 · 16710.1016/j.ijadhadh.2008.03.003 ↗
51. Custódio J. · J. Adhesion. · 2008 · 84 · 50210.1080/00218460802161558 ↗
52. Mittal K. L. · 2009 · 510.1163/ej.9789004165915.i-348 ↗
53. Brebner K. I. · Wood Sci. Technol. · 1985 · 19 · 7510.1007/BF00354755 ↗
54. Donath S. · Holzforschung · 2006 · 60 · 21010.1515/HF.2006.035 ↗
55. Schneider M. H. · Wood Sci. Technol. · 1985 · 19 · 6710.1007/BF00354754 ↗
56. Donath S. · Holzforschung · 2006 · 60 · 4010.1515/HF.2006.008 ↗
57. Custódio, J., Cruz, H., Broughton, J. G., Hutchinson, A. R. and Winfield, P. H. 2008.Proceedings of the 10th International Conference on the Science and Technology of Adhesion and Adhesives — Euradh 2008/Adhesion’08129–133. Oxford, UK
58. Mays G. · 199210.1017/CBO9780511529597 ↗
59. Custódio, J., Cruz, H. and Broughton, J. G. 2008.Proceedings of the 11th International Conference on Durability of Building Materials and Components — DBMC 2008635–642. Istanbul, Turkey