journal article·2013-04

Contact angle and wettability of hybrid surface-treated metal adherends

Jin Gyu Kim, Ilbeom Choi, Dai Gil Lee

Publisher page

Abstract

Abstract Adhesion performance of adhesively bonded metal joints with aluminum and stainless steel was much dependent on the surface treatment of the adherends. This work was aimed at optimizing hybrid surface treatments to improve wettability of metal surfaces and strength of adhesive metal joints, which was a combination of mechanical, chemical, and energetic surface treatment methods. The surface free energies and wettability of hybrid surface-treated metal adherends were measured for different treatment conditions with abrasion, grit blast, sulfuric acid etching, phosphoric acid anodizing, silane treatment, plasma treatment, and flame treatment. The surface morphology and chemical composition of the metal adherends were investigated by scanning electron microscopy and X-ray photoelectron spectroscopy and the bond strengths of the single-lap joints composed of aluminum and stainless steel adherends were measured with respect to hybrid surface treatment conditions. From the experiments, an effective hybrid surface treatment condition was suggested for metal surfaces with super-hydrophilic characteristics. Also, the failure mode of adhesive metal joints was evaluated by photo-surface analysis method. Keywords: hybrid treatmentcontact anglesurface wettabilityaluminumcohesivitylap shear strength Acknowledgments This research was supported by the WCU (World Class University) program through the National Research Foundation of Korea funded by the Ministry of Education, Science and Technology (R31-2008-000-10,045-0), grant No. EEWS-2011-N01110017 from the EEWS Research Project of the office of KAIST EEWS Initiative (EEWS: Energy, Environment, Water, and Sustainability) and BK21. Their support is greatly appreciated.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Adhesion, Friction, and Surface Interactions · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Hart-Smith, LJ. 1987.Composites, Edited by: Reinhart, TJ. 479–495. Ohio, USA: ASM International.
2. Lee DG · 2006
3. Chan CM · Surface Science Reports · 1996 · 24 · 110.1016/0167-5729(96)80003-3 ↗
4. Kinloch AJ · 198710.1007/978-94-015-7764-9 ↗
5. Parker AA, MacLachlan J. In: Mittal KL, editor. Silane and other coupling agents, vol. 2. Utrecht: VSP; 2000. 27–40.
6. Wegman RF · 1989
7. Denes F · 1998
8. Trevoy DJ · Journal of Physical Chemistry · 1958 · 62 · 83310.1021/j150565a016 ↗
9. Rider AN · International Journal of Adhesion and Adhesives · 2006 · 26 · 6710.1016/j.ijadhadh.2005.03.005 ↗
10. Nitowski GA. Topographic and surface chemical aspects of the adhesion of structural epoxy resins to phosphorus oxo acid treated aluminum adherends [dissertation]. VA: Materials Engineering Science; 1998.
11. Kim JG · Journal of Adhesion Science and Technology · 2010 · 24 · 77510.1163/016942409X12579497420843 ↗
12. Kim JK · Journal of Adhesion Science and Technology · 2003 · 17 · 32910.1163/156856103762864651 ↗
13. ASTM D2674-72. Standard methods of analysis of sulfochromate etch solution used in surface preparation of aluminum.
14. ASTM D3933-98. Standard guide for preparation of aluminum surface for structural adhesive bonding (phosphoric acid anodizing).
15. Allara DL · Materials Science and Engineering · 1986 · 83 · 21310.1016/0025-5416(86)90339-3 ↗
16. Kim WS · Journal of Adhesion Science and Technology · 2007 · 21 · 12510.1163/156856107780437462 ↗
17. Lee DG · 2006
18. Kim JK · Composite Structure · 2002 · 57 · 3710.1016/S0263-8223(02)00060-0 ↗
19. Bang CS · Journal of Adhesion Science and Technology · 2012 · 26 · 96910.1163/156856111X593667 ↗
20. van Oss CJ · Journal of Adhesion Science and Technology · 2002 · 16 · 66910.1163/156856102760099870 ↗
21. ASTM D1002-05. Standard test method for apparent shear strength of single-lap-joint adhesively bonded metal specimens by tension loading (metal-to-metal); 2005.
22. Lee KH · Journal of Adhesion Science and Technology · 2009 · 23 · 649
23. Kiruthika P · Surface Coatings Technology · 2010 · 204 · 127010.1016/j.surfcoat.2009.10.017 ↗
24. Pocius V · 1997
25. Baravian G · Surface Coatings Technology · 1999 · 115 · 6610.1016/S0257-8972(99)00162-0 ↗
26. Hong SG · Journal of Adhesion · 1995 · 49 · 13310.1080/00218469508009982 ↗