Effect of active rubber powder on structural two-component epoxy resin and its mechanical properties
Source abstract
Abstract
The aim of the research was to investigate a possibility to use active rubber powder (ARP) from a process of tyres recyclation in an area of a filler into a reactoplastics matrix applied in structural adhesive bonds. This study focuses on an analysis of a tensile strength, a shear impact strength and a hardness of the composite mixture itself and further on the interaction with an adhesive bonded material, i.e. it evaluates an influence of different ratio of ARP on the adhesive bond strength. Effects of the cyclic degradation environment combining the decreased temperature −40 °C and the increased temperature 90 °C at the simultaneous acting of the increased moisture up 90% is a part of the research. The tensile strength and the hardness were decreased by adding ARP. The experiment results proved a positive effect of ARP in the area of adhesive bonds exposed to the cyclic degradation at increased and decreased temperatures. Elastic ARP is able to absorb an inner tension in the layer of the adhesive bond.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Behavior of Composites · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Engineering, Department of Material Science and Manufacturing Technology, Czech University of Life Sciences Prague, Prague, Czech Republic
Faculty of Mechanical Engineering, Politechnika Lubelska, Lublin, Poland
Funding
grant agency of Faculty of Engineering, Czech University of Life Sciences Prague · Internal grant agency of Faculty of Engineering, Czech University of Life Sciences Prague
References (29)
Show source-provided references
1. 10.1016/j.measurement.2016.08.02010.1016/j.measurement.2016.08.020 ↗
2. 10.1016/j.jclepro.2017.01.12110.1016/j.jclepro.2017.01.121 ↗
3. 10.1016/j.wasman.2016.10.05110.1016/j.wasman.2016.10.051 ↗
4. Müller M · Agron Res · 2015 · 13 · 700
5. 10.1016/S0261-3069(00)00052-210.1016/S0261-3069(00)00052-2 ↗
6. Taranu N · Romanian J Mater · 2013 · 43 · 3
7. Knapčíková L · J Manuf Ind Eng · 2014 · 12 · 20
8. 10.15376/biores.12.1.255-26910.15376/biores.12.1.255-269 ↗
9. 10.1016/j.compositesb.2016.08.01410.1016/j.compositesb.2016.08.014 ↗
10. 10.1016/j.compositesb.2015.05.01510.1016/j.compositesb.2015.05.015 ↗
11. 10.1016/j.jrras.2015.06.01010.1016/j.jrras.2015.06.010 ↗
12. 10.15376/biores.12.3.5449-546110.15376/biores.12.3.5449-5461 ↗
13. 10.17221/51/2015-RAE10.17221/51/2015-RAE ↗
14. 10.17221/32/2015-RAE10.17221/32/2015-RAE ↗
15. Müller M · Tehnicki Vjestnik · 2013 · 20 · 641
16. 10.1007/s10965-007-9114-x10.1007/s10965-007-9114-x ↗
17. 10.1080/01694243.2017.128574310.1080/01694243.2017.1285743 ↗
18. Rudawska A · Int J Adhes Adhes · 2012 · 26 · 1233
19. Müller M · Tehnicki Vjesnik-Technical Gazette · 2013 · 20 · 571
20. 10.1016/j.ijadhadh.2016.06.01010.1016/j.ijadhadh.2016.06.010 ↗
21. 10.1016/j.compositesb.2017.04.01410.1016/j.compositesb.2017.04.014 ↗
22. 10.1016/j.jmatprotec.2004.04.31910.1016/j.jmatprotec.2004.04.319 ↗
23. Messler R · 200410.1016/B978-075067757-8/50014-2 ↗
24. 10.1016/j.apsusc.2013.09.01310.1016/j.apsusc.2013.09.013 ↗
25. Valášek P · Agron Res · 2014 · 12 · 291
26. Valášek P · Manuf Technol · 2014 · 14 · 632
27. 10.1016/j.ijadhadh.2012.03.00710.1016/j.ijadhadh.2012.03.007 ↗
28. Müller M · Agron Res · 2013 · 11 · 155
29. Valášek P · Agron Res · 2015 · 13 · 723