journal article·2017-02

Latex influence on the mechanical behavior and durability of cementitious materials

Yacine Benali, Fouad Ghomari

Publisher page

Abstract

The results of an experimental program conducted on latex-modified mortars are presented in this article. These mortars have become of growing interest in the field of construction. They were used as superplasticizers, or water reducers, for finishing work applications and for repairs, coatings, and waterproofing. This study is about using two polymers (latex), i.e. styrene–butadiene rubber and styrene–acrylic, in order to assess their performance in replacing cement in mortars. A series of mortar mixtures, containing 0, 2.5, 5, 10, 15, and 20% of solid polymer latex (by weight), were prepared and tested in the fresh and hardened states. The test parameters include the fluidity, compressive and flexural strengths, porosity accessible to water, adhesion to clay bricks, and cementitious substrates. The experimental results showed that substituting cement into modified mortars improves their fluidity and adhesion. In the case of clay substrates, a cohesive failure occurs within the substrate layer beyond 10% of substitution, while the rupture takes place at the interface for all formulations tested on cementitious substrates. It was also noted that the flexural tensile strength improved beyond 60 days. However, the compressive strength of polymer mortars decreased with the substitution rate of cement, for all maturities considered. However, for porosity accessible to water, the results follow a linear function, with an inflection at 5% of latex substitution.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. Ohama Y · 1995
2. 10.1016/S1065-7355(96)00005-310.1016/S1065-7355(96)00005-3 ↗
3. 10.1016/S0958-9465(97)00065-610.1016/S0958-9465(97)00065-6 ↗
4. 10.1016/j.cemconres.2004.07.01210.1016/j.cemconres.2004.07.012 ↗
5. 10.1016/j.cemconres.2011.01.00610.1016/j.cemconres.2011.01.006 ↗
6. 10.1016/j.compositesb.2011.11.05810.1016/j.compositesb.2011.11.058 ↗
7. 10.1016/j.conbuildmat.2011.09.00410.1016/j.conbuildmat.2011.09.004 ↗
8. Ngassam ILT. Durabilité des réparations des ouvrages d’art en Béton [Durability of repairing concrete structures] [Phd thesis]. France: University of Paris-Est; 2013. p. 219. French.
9. 10.1016/j.cemconres.2009.07.02010.1016/j.cemconres.2009.07.020 ↗
10. 10.1016/j.jiec.2013.04.00110.1016/j.jiec.2013.04.001 ↗
11. 10.1617/s11527-013-0107-410.1617/s11527-013-0107-4 ↗
12. Amde AM · TMS J · 2007 · 69
13. 10.1016/j.conbuildmat.2010.12.01210.1016/j.conbuildmat.2010.12.012 ↗
14. 10.1016/j.conbuildmat.2010.12.05210.1016/j.conbuildmat.2010.12.052 ↗
15. 10.1080/01694243.2013.86676010.1080/01694243.2013.866760 ↗
16. Soni K · J. Eng. Res. Appl · 2014 · 4 · 838
17. 10.1016/0079-6700(94)90031-010.1016/0079-6700(94)90031-0 ↗
18. 10.1016/j.reactfunctpolym.2003.10.00510.1016/j.reactfunctpolym.2003.10.005 ↗
19. 10.1016/j.polymer.2007.09.03110.1016/j.polymer.2007.09.031 ↗
20. Nguyen D. Etude de la nucléation controlée de latex polymère à la surface de nanoparticules d’oxyde pour l’élaboration de colloides hybrides structurés [Study of the controlled nucleation of polymer latex to the surface of the oxide nanoparticles for the development of structured hybrid colloids] [Phd thesis]. France: University of Bordeaux 1; 2008. p. 166. French.
21. 10.1039/b909964f10.1039/b909964f ↗
22. Youssef I. Polymérisation en émulsion et en miniémulsion. Influence de la combinaison de stabilisants moléculaires et macromoléculaires et suivi in situ par spectroscopie Raman [Emulsion polymerization and miniemulsion. Influence of the combination of molecular and macromolecular stabilizers and monitoring in situ by Raman spectroscopy] [Phd thesis] France: University of Lorraine; 2012. p. 182. French.
23. 10.1016/j.polymer.2013.01.01710.1016/j.polymer.2013.01.017 ↗
24. Ojeda T, Yamak HB, Ross KA, et al. Polymer science. In: Yılmaz F, editor. Croatia: InTech; 2013. p. 256.
25. 10.1016/S0958-9465(02)00092-610.1016/S0958-9465(02)00092-6 ↗
26. Gélinas L. Plastiques biosourcés : étude de leur performance environnementale comparativement aux plastiques pétrochimiques [Bio-based plastics: study of their environmental performance compared to petrochemical plastics] [Master’s thesis]. Canada: University of Sherbrooke; 2013. p. 111. French.
27. Rémy É Les plastiques biosourcés présentent-ils moins d’impacts négatifs pour l’environnement que les plastiques issus de la pétrochimie? [Biobased plastics they have fewer negative impacts on the environment as plastics derived from petrochemicals?] [Master’s thesis]. Canada: University of Sherbrooke; 2014. p. 197. French.
28. ACI Committee 548 · Polymer-modified concrete · 2003
29. ACI Committee 548 · Guide for the use of polymers in concrete · 1997
30. Pierre N · Interactions mortier-support : éléments déterminants des performances et de · 2008
31. Goto T. Influence des paramètres moléculaires du latex sur l’hydratation, la rhéologie et les propriétés mécaniques des composites ciment/latex [Influence of molecular parameters of the latex on hydration, rheology and mechanical properties of the composite cement / latex] [Phd thesis] France: University of Paris VI Pierre and Marie Curie; 2006. p. 243. French.
32. 10.1016/j.conbuildmat.2014.01.09410.1016/j.conbuildmat.2014.01.094 ↗
33. Soufi A. Etude de la durabilit_e des systèmes béton armé : mortiers de réparation en milieu marin [Study of the durability of reinforced concrete systems – repair mortars in marine environment] [Phd thesis] France: University of La Rochelle; 2013. p. 235. French.
34. ACI Committee 548 · Report on polymer-modified concrete · 2009
35. 10.1016/j.conbuildmat.2014.06.06110.1016/j.conbuildmat.2014.06.061 ↗
36. 10.1617/s11527-009-9501-310.1617/s11527-009-9501-3 ↗
37. 10.1016/j.cemconres.2014.01.01710.1016/j.cemconres.2014.01.017 ↗
38. 10.1016/j.cemconcomp.2013.04.01210.1016/j.cemconcomp.2013.04.012 ↗
39. 10.1016/j.aej.2014.01.00810.1016/j.aej.2014.01.008 ↗
40. 10.1016/j.conbuildmat.2011.04.06010.1016/j.conbuildmat.2011.04.060 ↗
41. 10.1016/j.conbuildmat.2012.12.02810.1016/j.conbuildmat.2012.12.028 ↗
42. ACI Committee 548 · Guide for the use of polymers in concrete · 2009
43. Mehta PK · 2006
44. 10.1016/j.cemconcomp.2013.10.01710.1016/j.cemconcomp.2013.10.017 ↗
45. 10.1016/j.aej.2012.11.00210.1016/j.aej.2012.11.002 ↗
46. 10.1016/j.compositesb.2013.06.02210.1016/j.compositesb.2013.06.022 ↗
47. 10.1016/j.conbuildmat.2009.02.02110.1016/j.conbuildmat.2009.02.021 ↗
48. 10.1080/19648189.2012.67514810.1080/19648189.2012.675148 ↗
49. 10.1016/j.proeng.2015.06.12910.1016/j.proeng.2015.06.129 ↗
50. 10.1016/j.jclepro.2015.04.13610.1016/j.jclepro.2015.04.136 ↗
51. 10.1016/j.cemconres.2003.09.00610.1016/j.cemconres.2003.09.006 ↗
52. 10.1016/S0008-8846(97)00001-X10.1016/S0008-8846(97)00001-X ↗
53. Folic RJ · ACI Mater. J · 1998 · 95 · 463
54. 10.1016/j.conbuildmat.2008.11.01110.1016/j.conbuildmat.2008.11.011 ↗
55. Benfraj A Transfert dans les bétons non saturés : Influence des laitiers et de l’endommagement mécanique [Transfert in non saturated concrete : influence of slag and mechanical damage] [PhD thesis]. France: University of Nantes; 2009. p. 189. French.
56. 10.1016/j.cemconcomp.2013.11.00510.1016/j.cemconcomp.2013.11.005 ↗
57. Courard L. Contribution à l’analyse des paramètres influençant la création de l’interface entre un béton et un système de réparation [Contribution to the analysis of the parameters influencing the creation of the interface between a concrete and a repair system] [PhD thesis] Belgium: University of Liège; 1998. p. 198. French.
58. 10.1016/j.matchar.2005.10.01410.1016/j.matchar.2005.10.014 ↗
59. 10.1080/01694243.2014.99800110.1080/01694243.2014.998001 ↗
60. Courard L · Mater. Struct · 2004 · 37 · 342
61. 10.1016/j.cemconres.2004.05.02710.1016/j.cemconres.2004.05.027 ↗
62. 10.1016/j.conbuildmat.2013.10.00610.1016/j.conbuildmat.2013.10.006 ↗
63. 10.1016/j.conbuildmat.2010.11.07610.1016/j.conbuildmat.2010.11.076 ↗
64. 10.1016/j.conbuildmat.2012.02.06710.1016/j.conbuildmat.2012.02.067 ↗
65. 10.1080/00038628.2004.969702310.1080/00038628.2004.9697023 ↗
66. 10.1016/j.cemconcomp.2005.05.00410.1016/j.cemconcomp.2005.05.004 ↗
67. 10.1016/j.conbuildmat.2013.06.01610.1016/j.conbuildmat.2013.06.016 ↗
68. 10.1016/S0008-8846(02)01094-310.1016/S0008-8846(02)01094-3 ↗
69. 10.1016/0958-9465(95)00007-Y10.1016/0958-9465(95)00007-Y ↗
70. 10.1016/j.cemconres.2004.06.03910.1016/j.cemconres.2004.06.039 ↗
71. 10.1016/j.ijadhadh.2013.01.00710.1016/j.ijadhadh.2013.01.007 ↗
72. 10.1016/S0008-8846(02)01057-810.1016/S0008-8846(02)01057-8 ↗
73. 10.1007/BF0248169810.1007/BF02481698 ↗
74. 10.1080/00218464.2012.70567310.1080/00218464.2012.705673 ↗