Microsphere tensiometry to measure advancing and receding contact angles on individual particles

In this paper, a method to measure the advancing and receding contact angles on individual colloidal spheres is described. For this purpose, the microspheres were attached to atomic force microscope cantilevers. Then the distance to which the microsphere jumps into its equilibrium position at the air-liquid interface of a drop or an air bubble was measured. From these distances the contact angles were calculated. To test the method, experiments were done with silanized silica spheres (4.1 μm in diameter). From the experiments with drops, an advancing contact angle of 101 ± 4° was determined. A receding contact angle of 101 ± 2° was calculated from the jump-in distance into a bubble. Both experimental techniques gave the same contact angle. In contrast, on similarly prepared planar silica surfaces, a clear hysteresis was measured with the sessile drop method; contact angles of 104.5 ± 1° and 93.8 ± 1° were determined for the advancing and receding contact angles, respectively.