journal article·2024-12-16

A state-of-the-art review on adhesively bonded joints of similar and dissimilar materials

Naveen Kumar Akkasali, Sandhyarani Biswas, Sujit Sen, S. Anitha

Publisher page

Abstract

In recent years, adhesive bonding has increasingly been used in many applications as it has many advantages over traditional joining techniques. More uniform stress distribution, absence of damage in the adhesive-bonded parts, high fatigue resistance, ease of manufacture, capability of fluid sealing, and the possibility of joining dissimilar materials are the advantages of adhesive bonding. This paper reviews the current research, advancements in adhesively bonded single lap joints (SLJs) and the related issues for joining different materials. The influence of various factors such as loading direction joint geometry, type of adhesive, type of adherend, joining technique, surface preparation technique, and environmental conditions on the bond properties of the adhesively bonded joints are also discussed. Different failure mechanisms associated with adhesive bonding are also highlighted. The geometry and method of manufacturing, surface preparation, and curing conditions significantly influence the strength of adhesively bonded joints. The combined surface treatment substantially affects the mode of failure in the adhesive joints. Among the different numerical methods, the cohesive zone modelling (CZM) approach can forecast the adhesive strength of joints for a wide range of designs with minimal error. Advanced numerical methodologies, such as the eXtended finite element method (XFEM) or meshless methods, have been utilized for adhesive joint analysis; however, further enhancements are requisite for their broader adoption.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, National Institute of Technology, Rourkela, India

Department of Chemical Engineering, National Institute of Technology, Rourkela, India

Vikram Sarabhai Space Centre (VSSC), Thiruvananthapuram, India

References (100+)

Show source-provided references
1. 10.3390/pr1005080610.3390/pr10050806 ↗
2. 10.3390/s1903068910.3390/s19030689 ↗
3. 10.3390/pharmaceutics1408161610.3390/pharmaceutics14081616 ↗
4. 10.1177/146442071560244110.1177/1464420715602441 ↗
5. 10.1016/0032-3861(78)90223-910.1016/0032-3861(78)90223-9 ↗
6. 10.1557/mrs2003.12410.1557/mrs2003.124 ↗
7. 10.4103/2277-8632.12847910.4103/2277-8632.128479 ↗
8. Petrie EM. Adhesive bonding of textiles: principles types of adhesive and methods of use. Elsevier; 2013. p. 225–274. Available from: https://linkinghub.elsevier.com/retrieve/pii/B978184569627650008110.1533/9780857093967.2.225 ↗
9. Chang I Zhao Y. Advances in powder metallurgy: properties processing and applications. Woodhead Publishing Limited Cambridge UK; 2013.
10. Petrie EM. Handbook of adhesives and sealants. 2nd ed. McGraw Hill New York NY; 2001.
11. Karbhari VM. Non-destructive evaluation (NDE) of polymer matrix composites. Woodhead Publishing Limited Cambridge UK; 2013.10.1533/9780857093554 ↗
12. 10.1007/978-3-319-55411-2_710.1007/978-3-319-55411-2_7 ↗
13. 10.1243/14644207JMDA21910.1243/14644207JMDA219 ↗
14. Hart-Smith LJ. Adhesive bonding of aircraft primary structures. SAE Technical Paper; 1980. p. 367–376. Available from: https://www.sae.org/content/801209/10.4271/801209 ↗
15. 10.1016/j.ijadhadh.2016.03.02510.1016/j.ijadhadh.2016.03.025 ↗
16. 10.1186/s40563-018-0104-510.1186/s40563-018-0104-5 ↗
17. 10.3390/met1006073010.3390/met10060730 ↗
18. 10.1016/S0143-7496(00)00006-310.1016/S0143-7496(00)00006-3 ↗
19. Davis GD. Surface treatments of selected materials. In Lucas F. M. da Silva Andreas Öchsner Robert D. Adams (Eds) Handbook of adhesion technology. 2nd ed. Springer Berlin Heidelberg; 2018.
20. 10.1016/S0026-0576(13)70288-510.1016/S0026-0576(13)70288-5 ↗
21. Suzuki Y. Adhesive bonding for railway application. In da Silva L. Öchsner A. Adams R. (Eds) Handbook of adhesion technology. Cham: Springer International Publishing; 2018. p. 1367–1390.10.1007/978-3-319-55411-2_47 ↗
22. 10.1080/01694243.2016.114639210.1080/01694243.2016.1146392 ↗
23. 10.11118/actaun20156302046310.11118/actaun201563020463 ↗
24. 10.1016/j.ijadhadh.2016.10.01010.1016/j.ijadhadh.2016.10.010 ↗
25. 10.1007/978-3-642-01169-610.1007/978-3-642-01169-6 ↗
26. 10.1016/j.ijadhadh.2010.05.00710.1016/j.ijadhadh.2010.05.007 ↗
27. 10.1016/j.ijadhadh.2006.04.00110.1016/j.ijadhadh.2006.04.001 ↗
28. 10.1590/S1516-1439201200500004210.1590/S1516-14392012005000042 ↗
29. 10.1016/j.ijadhadh.2020.10258710.1016/j.ijadhadh.2020.102587 ↗
30. 10.1016/j.ijadhadh.2020.10273510.1016/j.ijadhadh.2020.102735 ↗
31. 10.3390/applmech201000710.3390/applmech2010007 ↗
32. 10.1016/j.ijadhadh.2012.03.00710.1016/j.ijadhadh.2012.03.007 ↗
33. 10.1016/j.ijadhadh.2012.07.01210.1016/j.ijadhadh.2012.07.012 ↗
34. 10.1080/00218464.2013.77325810.1080/00218464.2013.773258 ↗
35. 10.1186/s40563-015-0042-410.1186/s40563-015-0042-4 ↗
36. 10.1080/00218464.2021.199440410.1080/00218464.2021.1994404 ↗
37. 10.1163/016942411X58008110.1163/016942411X580081 ↗
38. 10.1016/j.matpr.2017.07.17010.1016/j.matpr.2017.07.170 ↗
39. 10.1515/jee-2018-001010.1515/jee-2018-0010 ↗
40. 10.1016/S0143-7496(02)00064-710.1016/S0143-7496(02)00064-7 ↗
41. Karpiesiuk J. Young’s modulus and Poisson’s ratio of polyurethane adhesive in lightweight floor system. Mod Approach Mater Sci. 2020;2:251–255.
42. 10.3390/polym1518384310.3390/polym15183843 ↗
43. 10.3390/ma1522806010.3390/ma15228060 ↗
44. 10.1177/002199830809633410.1177/0021998308096334 ↗
45. 10.1016/j.ijadhadh.2020.10255710.1016/j.ijadhadh.2020.102557 ↗
46. 10.1016/j.jmst.2021.05.07010.1016/j.jmst.2021.05.070 ↗
47. 10.1016/j.cej.2018.12.00110.1016/j.cej.2018.12.001 ↗
48. Ghazali H Ye L Zhang M-Q. Lap shear strength and healing capability of self-healing adhesive containing epoxy/mercaptan microcapsules; 2016. p. 140004. Available from: https://pubs.aip.org/aip/acp/article/84992610.1063/1.4942339 ↗
49. 10.1098/rsif.2006.019410.1098/rsif.2006.0194 ↗
50. 10.1038/3505723210.1038/35057232 ↗
51. 10.1016/j.polymer.2011.02.01110.1016/j.polymer.2011.02.011 ↗
52. 10.1016/j.matpr.2020.10.09710.1016/j.matpr.2020.10.097 ↗
53. 10.3390/molecules2819675710.3390/molecules28196757 ↗
54. 10.1016/j.ijadhadh.2022.10324410.1016/j.ijadhadh.2022.103244 ↗
55. 10.1016/j.compositesb.2020.10825510.1016/j.compositesb.2020.108255 ↗
56. 10.1163/15685610131703550310.1163/156856101317035503 ↗
57. 10.1163/15685610477363545410.1163/156856104773635454 ↗
58. 10.1016/j.ijadhadh.2021.10284510.1016/j.ijadhadh.2021.102845 ↗
59. 10.1016/j.compositesb.2014.03.00110.1016/j.compositesb.2014.03.001 ↗
60. 10.1080/0021846090288031310.1080/00218460902880313 ↗
61. 10.1016/j.compstruct.2019.02.09310.1016/j.compstruct.2019.02.093 ↗
62. 10.1016/j.ijadhadh.2010.12.00310.1016/j.ijadhadh.2010.12.003 ↗
63. 10.1016/j.tafmec.2021.10298410.1016/j.tafmec.2021.102984 ↗
64. 10.1002/mawe.20130012310.1002/mawe.201300123 ↗
65. 10.1016/j.ijadhadh.2013.02.00710.1016/j.ijadhadh.2013.02.007 ↗
66. 10.1016/j.conbuildmat.2015.08.13010.1016/j.conbuildmat.2015.08.130 ↗
67. 10.1186/s40563-020-00131-610.1186/s40563-020-00131-6 ↗
68. 10.1016/j.ijadhadh.2021.10285410.1016/j.ijadhadh.2021.102854 ↗
69. 10.1186/s40563-019-0123-x10.1186/s40563-019-0123-x ↗
70. 10.1016/j.engfracmech.2014.12.00510.1016/j.engfracmech.2014.12.005 ↗
71. 10.1016/j.compositesb.2012.05.05210.1016/j.compositesb.2012.05.052 ↗
72. 10.3390/ma1112258110.3390/ma11122581 ↗
73. 10.1016/j.ijadhadh.2019.10247710.1016/j.ijadhadh.2019.102477 ↗
74. 10.1016/j.tafmec.2021.10301810.1016/j.tafmec.2021.103018 ↗
75. 10.1016/j.compstruct.2009.09.00910.1016/j.compstruct.2009.09.009 ↗
76. 10.1002/pc.2517610.1002/pc.25176 ↗
77. 10.1016/j.ijadhadh.2021.10303010.1016/j.ijadhadh.2021.103030 ↗
78. 10.1016/j.compscitech.2022.10956710.1016/j.compscitech.2022.109567 ↗
79. 10.1016/j.ijadhadh.2014.02.00810.1016/j.ijadhadh.2014.02.008 ↗
80. 10.3390/polym1323410310.3390/polym13234103 ↗
81. 10.1177/0021998321104206610.1177/00219983211042066 ↗
82. 10.1177/095441002093201410.1177/0954410020932014 ↗
83. 10.1016/j.compositesb.2013.06.01710.1016/j.compositesb.2013.06.017 ↗
84. 10.1016/j.promfg.2019.07.02610.1016/j.promfg.2019.07.026 ↗
85. 10.1016/j.compstruct.2019.11089410.1016/j.compstruct.2019.110894 ↗
86. 10.1016/j.ijadhadh.2019.02.00410.1016/j.ijadhadh.2019.02.004 ↗
87. 10.1016/j.compositesb.2012.04.02610.1016/j.compositesb.2012.04.026 ↗
88. 10.1016/j.compositesa.2021.10644310.1016/j.compositesa.2021.106443 ↗
89. 10.1016/S0142-9418(01)00099-X10.1016/S0142-9418(01)00099-X ↗
90. 10.1016/S0143-7496(98)00026-810.1016/S0143-7496(98)00026-8 ↗
91. Roberge R. Engineered materials; McGraw-Hill Companies United States of America 1987. p. 109–112.10.1016/0346-251X(87)90058-3 ↗
92. 10.1016/j.ijadhadh.2012.02.00310.1016/j.ijadhadh.2012.02.003 ↗
93. 10.1016/j.ijadhadh.2005.03.01510.1016/j.ijadhadh.2005.03.015 ↗
94. 10.1016/j.conbuildmat.2018.11.23510.1016/j.conbuildmat.2018.11.235 ↗
95. 10.1186/s40563-018-0116-110.1186/s40563-018-0116-1 ↗
96. 10.1016/j.ijadhadh.2020.10269610.1016/j.ijadhadh.2020.102696 ↗
97. 10.1016/j.ijadhadh.2008.03.00510.1016/j.ijadhadh.2008.03.005 ↗
98. 10.1016/j.ijadhadh.2005.03.01410.1016/j.ijadhadh.2005.03.014 ↗
99. 10.1016/j.ijadhadh.2016.10.00910.1016/j.ijadhadh.2016.10.009 ↗
100. 10.1016/j.apm.2011.09.07910.1016/j.apm.2011.09.079 ↗