Polymer solar cells based low bandgap A1-D-A2-D terpolymer based on fluorinated thiadiazoloquinoxaline and benzothiadiazole acceptors with energy loss less than 0.5 eV

Abstract We synthesized an ultra low bandgap terpolymer denoted as P containing fluorinated-fluorene attached thiadiazoloquinoxaline and benzothiadiazole acceptors and thiophene as donor in its backbone and investigated its optical and electrochemical properties. This terpolymer is used for as donor along with PC 71 BM as electron acceptor in solution processed polymer solar cells (PSCs). The P showed a shows strong absorption band from 650 nm to 1100 nm with an optical bandgap of 1.12 eV and highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of −5.25 eV and −3.87 eV, respectively. After the optimization of P to PC 71 BM weight ratio, the optimized weight ratio 1:2 in chlorobenzene (CB) solution, the PSC showed overall power conversion efficiency of 4.10% (J sc of 10.96 mA/cm 2 , V oc of 0.68 V and FF of 0.55). After the solvent additive (3 v% DIO) followed by subsequent thermal annealing (SA-TA) the PCE has been increased up to 7.54% with J sc of 16.12 mA/cm 2 , V oc of 0.65 V and FF of 0.72. The increase in the PCE is related with the enhancement in the both J sc and FF, attributed optimized nanoscale morphology of the active layer for both efficient exciton dissociation and charge transport towards the electrodes and balanced charge transport in the device, induced by the TSA treatment of the active layer. This is the highest PCE of PSCs with an energy loss about 0.47 eV with the low bandgap of 1.12 eV.