An analytical solution to the adhesive cylindrical indentation of a compressible elastic thin layer
Source abstract
Abstract
A simple analytical method based on the Kerr-type model is proposed to extend the well-known Johnson-Kendall-Roberts (JKR) model to the adhesive contact between a rigid cylinder and a compressible elastic thin layer under plane strain. The Kerr-type model provides a linear differential relation between the contact pressure and the normal deflection of the upper surface of the layer, whose lower surface is either bonded or sliding on a rigid substrate. With the aid of Betti’s reciprocal theorem, several easy-to-use explicit formulas are obtained for the relations between the indentation force, the indentation depth and the contact width, and the pressure distribution inside the contact zone and the pull-off force are determined. Reasonable agreement of the predicted results with existing numerical results shows that the present analytical model can capture the adhesive effects on the cylindrical indentation of a compressible elastic thin layer on a rigid substrate.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Mechanical stress and fatigue analysis · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Aerospace Engineering, Chongqing University, Chongqing, China;
Department of Mechanical Engineering, University of Alberta, Edmonton, Canada
Funding
National Natural Science Foundation of China · Natural Sciences and Engineering Research Council of Canada · Fundamental Research Funds for the Central Universities
References (45)
Show source-provided references
1. Fischer-Cripps A. C. · Appl. Mech. Rev. · 2004 · 57 · B1210.1115/1.1704625 ↗
2. Sen S. · Biophys. J. · 2005 · 89 · 320310.1529/biophysj.105.063826 ↗
3. 10.1098/rspa.1971.014110.1098/rspa.1971.0141 ↗
4. 10.1016/0021-9797(92)90285-T10.1016/0021-9797(92)90285-T ↗
5. Borodich F. M. · 2014 · 47 · 225
6. 10.1016/j.mechmat.2014.03.01110.1016/j.mechmat.2014.03.011 ↗
7. 10.1016/j.jmps.2014.03.00310.1016/j.jmps.2014.03.003 ↗
8. 10.1063/1.36281910.1063/1.362819 ↗
9. Zhang L. · J. Appl. Mech. · 2019 · 86 · 05100410.1115/1.4042574 ↗
10. Argatov I. · J. Adhes. · 2019 · 1
11. 10.1080/0021846880807127110.1080/00218468808071271 ↗
12. Wu J. · Thin Solid Films · 2019 · 669 · 50010.1016/j.tsf.2018.11.034 ↗
13. Shull K. R. · Macromol. Chem. Phys. · 1998 · 199 · 48910.1002/(SICI)1521-3935(19980401)199:4<489::AID-MACP489>3.0.CO;2-A ↗
14. 10.1016/S0927-796X(01)00039-010.1016/S0927-796X(01)00039-0 ↗
15. 10.1016/S0921-5093(03)00289-210.1016/S0921-5093(03)00289-2 ↗
16. 10.1088/0022-3727/37/20/01610.1088/0022-3727/37/20/016 ↗
17. 10.1088/0022-3727/39/16/02110.1088/0022-3727/39/16/021 ↗
18. 10.1557/jmr.2006.032710.1557/jmr.2006.0327 ↗
19. 10.1016/j.tsf.2006.07.15110.1016/j.tsf.2006.07.151 ↗
20. Chung P. C. · Langmuir · 2014 · 30 · 1520010.1021/la503879v ↗
21. 10.1093/qjmam/hbw00210.1093/qjmam/hbw002 ↗
22. Ding Y. · J. Phys. D: Appl. Phys. · 2018 · 51 · 29540110.1088/1361-6463/aacaec ↗
23. 10.1177/108128651879737810.1177/1081286518797378 ↗
24. 10.1088/0022-3727/30/12/00410.1088/0022-3727/30/12/004 ↗
25. Dalmeya R. · J. Adhes. · 2012 · 88 · 110.1080/00218464.2011.610224 ↗
26. Hannah M. · Q. J. Mech. Appl. Math. · 1951 · 4 · 9410.1093/qjmam/4.1.94 ↗
27. Meijers P. · Appl. Sci. Res. · 1968 · 18 · 35310.1007/BF00382359 ↗
28. Alblas J. B. · Acta Mech. · 1970 · 9 · 29210.1007/BF01179827 ↗
29. Sabnis P. A. · Int. J. Plast. · 2013 · 51 · 20010.1016/j.ijplas.2013.05.004 ↗
30. Hui C. Y. · J. Polym. Sci., Part B: Polym. Phys. · 2006 · 44 · 35910.1002/polb.20613 ↗
31. 10.1039/C5SM00008D10.1039/C5SM00008D ↗
32. 10.1080/00218464.2017.130952410.1080/00218464.2017.1309524 ↗
33. Sohn D. · Int. J. Solids Struct. · 2015 · 71 · 24410.1016/j.ijsolstr.2015.06.026 ↗
34. 10.1016/B978-0-12-404501-9.50009-210.1016/B978-0-12-404501-9.50009-2 ↗
35. Zhang L. · Z. Angew. Math. Phys. · 2020 · 71 · 3110.1007/s00033-020-1258-0 ↗
36. Liu F. · J. Visualized Exp. · 2011 · e2911
37. Delavoipière J. · Soft Matter · 2016 · 12 · 804910.1039/C6SM01448H ↗
38. 10.1007/BF0053737610.1007/BF00537376 ↗
39. Wu G. T. · Z. Angew. Math. Phys. · 2019 · 70 · 12610.1007/s00033-019-1169-0 ↗
40. Zhang L. · Z. Angew. Math. Mech. · 2019 · 99 · e20190016210.1002/zamm.201900162 ↗
41. Ru C. Q. · J. Appl. Phys. · 2001 · 90 · 609810.1063/1.1418424 ↗
42. Li M. · Int. J. Mech. Sci. · 2018 · 149 · 50810.1016/j.ijmecsci.2017.07.047 ↗
43. Li M. · Z. Angew. Math. Phys. · 2018 · 69 · 9310.1007/s00033-018-0987-9 ↗
44. 10.1016/B978-0-12-374446-3.50010-810.1016/B978-0-12-374446-3.50010-8 ↗
45. Greenwood J. A. · Int. J. Solids Struct. · 2012 · 49 · 296210.1016/j.ijsolstr.2012.05.036 ↗