The phantom menace of dynamic soft-shorts in solid-state battery research
Source abstract
Abstract
Solid-state batteries with lithium metal anodes present the highest energy density batteries for applications in electric vehicles, leading to massive R&D investments over the past decade. Although most research focuses on preventing lithium metal dendrites that eventually short the battery, the nature of these shorts remains elusive. Soft-shorts, in particular, receive little attention or are not recognized, even in published data. Here, we present a comprehensive outline of the detection and analysis of soft-shorts in solid-state lithium metal cells with composite polymer electrolytes as well as a fundamental understanding of the dynamics of soft-shorts. Transient un-shorting of soft-shorts that occurs on the micro-to-millisecond timescale—driven by joule heating, chemical reactivity, and other processes—limits one’s ability to determine whether the cell was or is still shorted. We provide numerous experimental methods to detect and analyze soft-shorts in any battery type as a resource to all battery researchers. Solid-state batteries with lithium metal anodes present the highest energy density batteries for applications in electric vehicles, leading to massive R&D investments over the past decade. Although most research focuses on preventing lithium metal dendrites that eventually short the battery, the nature of these shorts remains elusive. Soft-shorts, in particular, receive little attention or are not recognized, even in published data. Here, we present a comprehensive outline of the detection and analysis of soft-shorts in solid-state lithium metal cells with composite polymer electrolytes as well as a fundamental understanding of the dynamics of soft-shorts. Transient un-shorting of soft-shorts that occurs on the micro-to-millisecond timescale—driven by joule heating, chemical reactivity, and other processes—limits one’s ability to determine whether the cell was or is still shorted. We provide numerous experimental methods to detect and analyze soft-shorts in any battery type as a resource to all battery researchers.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (82)
Show source-provided references
1. The quest for the Holy Grail of solid-state lithium batteries10.1039/D2EE00842D ↗
2. Challenges for and pathways toward Li-metal-based all-solid-state batteries10.1021/acsenergylett.1c00445 ↗
3. Dendrites in lithium metal anodes: suppression, regulation, and elimination10.1021/acs.accounts.9b00437 ↗
4. Lithium dendrite in all-solid-state batteries: growth mechanisms, suppression strategies, and characterizations10.1016/j.matt.2020.03.015 ↗
5. A Systematic Study Aiming Toward Voltage Noise Elimination in viscoelastic poly(methyl methacrylate)–poly(ethylene oxide) Polymer Blend Electrolytes in Li Metal Battery Cells10.1002/aenm.202301035 ↗
6. Poly(ethylene oxide)-based electrolyte for solid-state-lithium-batteries with high voltage positive electrodes: evaluating the role of electrolyte oxidation in rapid cell failure10.1038/s41598-020-61373-9 ↗
7. Investigating the relationship between internal short circuit and thermal runaway of lithium-ion batteries under thermal abuse condition10.1016/j.ensm.2020.10.020 ↗
8. Dendrite-accelerated thermal runaway mechanisms of lithium metal pouch batteries10.1002/sus2.74 ↗
9. The interplay between solid electrolyte interface (SEI) and dendritic lithium growth10.1016/j.nanoen.2017.08.005 ↗
10. Modeling overcharge at graphite electrodes: plating and dissolution of lithium
11. Direct in situ observation and explanation of lithium dendrite of commercial graphite electrodes10.1039/C5RA13289D ↗
12. Controlling Li dendritic growth in graphite anodes by potassium electrolyte additives for Li-ion batteries10.1021/acsami.2c11175 ↗
13. Direct observation of the growth of lithium dendrites on graphite anodes by operando EC-AFM10.1002/smtd.201700298 ↗
14. Fast lithium growth and short circuit induced by localized-temperature hotspots in lithium batteries
15. Identifying soft breakdown in all-solid-state lithium battery10.1016/j.joule.2022.05.020 ↗
16. Lithium-metal growth kinetics on LLZO garnet-type solid electrolytes10.1016/j.joule.2019.06.013 ↗
17. In situ neutron depth profiling of lithium metal–garnet interfaces for solid state batteries10.1021/jacs.7b07904 ↗
18. Fusing phenomenon of lithium-ion battery internal short circuit10.1149/2.1721712jes ↗
19. Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries10.1038/s41560-017-0047-2 ↗
20. “Soft Shorts” hidden in zinc metal anode research10.1016/j.joule.2021.12.009 ↗
21. Instability of Ga-substituted Li7La3Zr2O12 toward metallic Li10.1039/D1TA10215J ↗
22. High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes10.1038/s41560-018-0312-z ↗
23. Transition of lithium growth mechanisms in liquid electrolytes10.1039/C6EE01674J ↗
24. Transient polarization and dendrite initiation dynamics in ceramic electrolytes10.1021/acsenergylett.3c00499 ↗
25. Fast charging limits of ideally stable metal anodes in liquid electrolytes10.1002/aenm.202102967 ↗
26. Overlimiting ion transport dynamic toward Sand's time in solid polymer electrolytes
27. Mechanism explaining the onset time of dendritic lithium electrodeposition via considerations of the Li+ transport within the solid electrolyte interphase10.1149/2.0601814jes ↗
28. Understanding the influence of Li7La3Zr2O12 nanofibers on critical current density and coulombic efficiency in composite polymer electrolytes10.1021/acsami.3c04262 ↗
29. All-solid-state lithium batteries enabled by sulfide electrolytes: from fundamental research to practical engineering design10.1039/D1EE00551K ↗
30. Recent progress in and perspectives on emerging halide superionic conductors for all-solid-state batteries10.1007/s41918-023-00179-5 ↗
31. Critical current density in solid-state lithium metal batteries: mechanism, influences, and strategies
32. Mechanical stress induced current focusing and fracture in grain boundaries10.1149/2.0321910jes ↗
33. Unveiling the role of PEO-capped TiO2 nanofiller in stabilizing the anode interface in lithium metal batteries10.1021/acs.nanolett.2c02973 ↗
34. The natural critical current density limit for Li7La3Zr2O12 garnets10.1039/C9TA14177D ↗
35. Multifunctional coatings on sulfide-based solid electrolyte powders with enhanced processability, stability, and performance for solid-state batteries10.1002/adma.202300673 ↗
36. Polysiloxane-based single-ion conducting polymer blend electrolyte comprising small-molecule organic carbonates for high-energy and high-power lithium-metal batteries10.1002/aenm.202200013 ↗
37. Theory of impedance spectroscopy for lithium batteries10.1021/acs.jpcc.9b07389 ↗
38. Electrochemical impedance spectroscopy for all-solid-state batteries: theory, methods and future outlook10.1002/celc.202100108 ↗
39. Electroceramics: characterization by impedance spectroscopy10.1002/adma.19900020304 ↗
40. Wetting and inductivity in the impedance behavior of large lithium-ion cells10.1149/1945-7111/ac6aec ↗
41. Electrical resistivity of liquid and solid lithium10.1039/dt9740002325 ↗
42. Different efforts but similar insights in battery R&D: electrochemical impedance spectroscopy vs galvanostatic (constant current) technique10.1021/acs.chemmater.2c02376 ↗
43. Dendrite short-circuit and fuse effect on Li/polymer/Li cells10.1016/j.electacta.2006.02.004 ↗
44. Electrochemical healing of dendrites in garnet-based solid electrolytes10.1021/acsenergylett.0c01896 ↗
45. Lattice parameters of lithium-magnesium and lithium-silver alloys10.1088/0305-4608/4/9/004 ↗
46. Self-heating–induced healing of lithium dendrites10.1126/science.aap8787 ↗
47. Polymer film heat transfer surfaces in seawater desalination: fouling layer formation and technology10.1002/ceat.201900492 ↗
48. Polymer–mould interface heat transfer coefficient measurements for polymer processing10.1016/j.polymertesting.2008.02.007 ↗
49. Increasing ionic conductivity of poly(ethylene oxide) by reaction with metallic Li10.1002/aesr.202100142 ↗
50. Early-stage decomposition of solid polymer electrolytes in Li-metal batteries10.1039/D1TA05015J ↗
51. Liquid metal welding to suppress Li dendrite by equalized heat distribution
52. Reversible short-circuit behaviors in garnet-based solid-state batteries10.1002/aenm.202000702 ↗
53. Understanding the failure process of sulfide-based all-solid-state lithium batteries via operando nuclear magnetic resonance spectroscopy
54. Elimination of “voltage noise” of poly (ethylene oxide)-based solid electrolytes in high-voltage lithium batteries: linear versus network polymers10.1016/j.isci.2020.101225 ↗
55. Effective optimization of high voltage solid-state lithium batteries by using poly(ethylene oxide)-based polymer electrolyte with semi-interpenetrating network10.1002/adfm.202006289 ↗
56. Realizing poly(ethylene oxide) as a polymer for solid electrolytes in high voltage lithium batteries via simple modification of the cell setup10.1039/D1MA00009H ↗
57. Molten Sodium Penetration in NaSICON Electrolytes at 0.1 A cm–210.1021/acsaem.2c03944 ↗
58. Practical considerations for testing polymer electrolytes for high-energy solid-state batteries10.1021/acsenergylett.1c00810 ↗
59. Intergranular Li metal propagation through polycrystalline Li6.25Al0.25La3Zr2O12 ceramic electrolyte10.1016/j.electacta.2016.12.018 ↗
60. In situ observation of dendrite behavior of electrode in half and full cells10.1149/2.0921906jes ↗
61. Morphodynamics of dendrite growth in alumina based all solid-state sodium metal batteries10.1039/D3EE00237C ↗
62. Modification of lithium electrodeposition behavior by variation of electrode distance10.1016/j.jpowsour.2022.231338 ↗
63. Distance-dependent solid electrolyte interphase control by electrochemical pretreatment10.1021/acsenergylett.2c01390 ↗
64. Current-dependent lithium metal growth modes in “anode-free” solid-state batteries at the Cu|LLZO Interface10.1002/aenm.202203174 ↗
65. Unraveling Li growth kinetics in solid electrolytes due to electron beam charging10.1126/sciadv.abq3285 ↗
66. Microstructure of lithium dendrites revealed by room-temperature electron microscopy10.1021/jacs.1c13213 ↗
67. Direct observation and quantitative analysis of lithium dendrite growth by in situ transmission electron microscopy10.1149/1945-7111/abe5ec ↗
68. Role of lithium iodide addition to lithium thiophosphate: implications beyond conductivity10.1021/acs.chemmater.9b05286 ↗
69. New insights on the structure of electrochemically deposited lithium metal and its solid electrolyte interphases via cryogenic TEM10.1021/acs.nanolett.7b03606 ↗
70. 4D imaging of lithium-batteries using correlative neutron and X-ray tomography with a virtual unrolling technique10.1038/s41467-019-13943-3 ↗
71. Failure mechanisms at the interfaces between lithium metal electrodes and a single-ion conducting polymer gel electrolyte10.1021/acsami.2c16869 ↗
72. Detection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes10.1038/nmat3793 ↗
73. Evolution of protrusions on lithium metal anodes stabilized by a solid block copolymer electrolyte studied using time-resolved X-ray tomography10.1021/acsami.1c04582 ↗
74. Internal short circuit and failure mechanisms of lithium-ion pouch cells under mechanical indentation abuse conditions:an experimental study10.1016/j.jpowsour.2020.227939 ↗
75. Tomography imaging of lithium electrodeposits using neutron, synchrotron X-ray, and laboratory X-ray sources: A comparison10.3389/fenrg.2021.657712 ↗
76. Cao, D., Zhang, K., Li, W., Zhang, Y., Ji, T., Zhao, X., Cakmak, E., Zhu, J., Cao, Y., and Zhu, H. Nondestructively visualizing and understanding the mechano-electro-chemical origins of “soft short” and “creeping” in all-solid-state batteries. Adv. Funct. Mater., n/a, 2307998 doi:10.1002/adfm.202307998.10.1002/adfm.202307998 ↗
77. Quantification of dead lithium via in situ nuclear magnetic resonance spectroscopy
78. In situ 7 Li-NMR analysis of lithium metal surface deposits with varying electrolyte compositions and concentrations10.1039/C9CP05334D ↗
79. Fault diagnosis of external soft-short circuit for series connected lithium-ion battery pack based on modified dual extended Kalman filter
80. A soft short-circuit diagnosis method for lithium-ion battery packs in electric vehicles10.1109/TPEL.2022.3151620 ↗
81. High areal energy density 3D lithium-ion microbatteries10.1016/j.joule.2018.04.002 ↗
82. Powering internet-of-things from ambient energy: a review