Degradation of thermal oxide film on pure titanium in an acidic environment containing fluoride
Source abstract
Abstract
Abstract Electrochemical degradation behavior of thermally oxidized pure Ti in the fluoride-containing acidic environments was investigated. Compact TiO2 oxides with acceptable hardness and superior corrosion resistance are formed through the thermal oxidation at 650 °C for 24 h. Corrosion of the oxidized Ti depends on the oxidation condition and fluoride content, resulting in the various interfacial structures at the oxide/solution and metal/solution interface. Degradation of the oxidized Ti consists of three stages during long-term immersion, while its critical fluoride concentration is increased by 1~2 orders of magnitude, attributed to the high stability of the TiO2 thermal oxides.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Shoemaker, L. & Crum, J. R. Experience in effective application of metallic materials for construction of FGD systems. Special Metals www.specialmetals.com (2010).
2. Shoemaker, L., Crum, J., Maitra, D., Muro, R. & Neighbor, M. Recent Experience With Stainless Steels in FGD Air Pollution Control Service. Corrosion 2011 (NACE International, 2011).
3. Zeng, Y., Li, K., Hughes, R. & Luo, J. L. Corrosion mechanisms and materials selection for the construction of flue gas component in advanced heat and power systems. Ind. Eng. Chem. Res. 56, 14141–14154 (2017).10.1021/acs.iecr.7b03664 ↗
4. Pan, P., Chen, H., Liang, Z. & Zhao, Q. Desulfurized flue gas corrosion coupled with deposits in a heating boiler. Corros. Sci. 131, 126–136 (2018).10.1016/j.corsci.2017.11.009 ↗
5. Cui, Z. et al. Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates. Corros. Sci. 118, 31–48 (2017).10.1016/j.corsci.2017.01.016 ↗
6. Dou, Y., Han, S., Wang, L., Wang, X. & Cui, Z. Characterization of the passive properties of 254SMO stainless steel in simulated desulfurized flue gas condensates by electrochemical analysis, XPS and ToF-SIMS. Corros. Sci. 165, 108405 (2020).10.1016/j.corsci.2019.108405 ↗
7. Wang, Z. B., Hu, H. X., Liu, C. B. & Zheng, Y. G. The effect of fluoride ions on the corrosion behavior of pure titanium in 0.05M sulfuric acid. Electrochim. Acta 135, 526–535 (2014).10.1016/j.electacta.2014.05.055 ↗
8. Bordzilowski, J. & Darowicki, K. Anti-corrosion protection of chimneys and flue gas ducts. Anti-Corros. Method. Mater. 45, 388–396 (1998).10.1108/00035599810236243 ↗
9. Li, X. et al. Understanding the effect of fluoride on corrosion behavior of pure titanium in different acids. Corros. Sci. 192, 109812 (2021).10.1016/j.corsci.2021.109812 ↗
10. Stancheva, M. & Bojinov, M. Influence of fluoride content on the barrier layer formation and titanium dissolution in ethylene glycol–water electrolytes. Electrochim. Acta 78, 65–74 (2012).10.1016/j.electacta.2012.05.093 ↗
11. Amrutha, M. S., Fasmin, F. & Ramanathan, S. Effect of HF concentration on anodic dissolution of titanium. J. Electrochem. Soc. 164, H188–H197 (2017).10.1149/2.0501704jes ↗
12. Li, Y. & Xu, J. Is niobium more corrosion-resistant than commercially pure titanium in fluoride-containing artificial saliva? Electrochim. Acta 233, 151–166 (2017).10.1016/j.electacta.2017.03.015 ↗
13. Industrial, I. C. O. Model Code for Steel Chimneys. (CICIND, 1999).
14. Wang, Z. B., Hu, H. X., Zheng, Y. G., Ke, W. & Qiao, Y. X. Comparison of the corrosion behavior of pure titanium and its alloys in fluoride-containing sulfuric acid. Corros. Sci. 103, 50–65 (2016).10.1016/j.corsci.2015.11.003 ↗
15. Cui, Z. et al. Electrochemical behavior and surface characteristics of pure titanium during corrosion in simulated desulfurized flue gas condensates. J. Electrochem. Soc. 165, C542–C561 (2018).10.1149/2.1321809jes ↗
16. Kumar, S., Narayanan, T. S. N. S., Raman, S. G. S. & Seshadri, S. K. Thermal oxidation of CP Ti—An electrochemical and structural characterization. Mater. Charact. 61, 589–597 (2010).10.1016/j.matchar.2010.03.002 ↗
17. Shankar, A. R., Karthiselva, N. S. & Mudali, U. K. Thermal oxidation of titanium to improve corrosion resistance in boiling nitric acid medium. Surf. Coat. Technol. 235, 45–53 (2013).10.1016/j.surfcoat.2013.07.010 ↗
18. Wang, S., Liao, Z., Liu, Y. & Liu, W. Influence of thermal oxidation temperature on the microstructural and tribological behavior of Ti6Al4V alloy. Surf. Coat. Technol. 240, 470–477 (2014).10.1016/j.surfcoat.2014.01.004 ↗
19. Zhang, Y., Ma, G.-R., Zhang, X.-C., Li, S. & Tu, S.-T. Thermal oxidation of Ti-6Al–4V alloy and pure titanium under external bending strain: Experiment and modelling. Corros. Sci. 122, 61–73 (2017).10.1016/j.corsci.2017.01.009 ↗
20. Ashrafizadeh, A. & Ashrafizadeh, F. Structural features and corrosion analysis of thermally oxidized titanium. J. Alloy. Compd. 480, 849–852 (2009).10.1016/j.jallcom.2009.02.079 ↗
21. Kumar, S., Narayanan, T. S., Raman, S. G. S. & Seshadri, S. Thermal oxidation of CP-Ti: evaluation of characteristics and corrosion resistance as a function of treatment time. Mater. Sci. Eng. C. 29, 1942–1949 (2009).10.1016/j.msec.2009.03.007 ↗
22. Birch, J. & Burleigh, T. Oxides formed on titanium by polishing, etching, anodizing, or thermal oxidizing. Corrosion 56, 1233–1241 (2000).10.5006/1.3280511 ↗
23. Nakagawa, M., Matsuya, S., Shiraishi, T. & Ohta, M. Effect of fluoride concentration and pH on corrosion behavior of titanium for dental use. J. Dent. Res. 78, 1568–1572 (1999).10.1177/00220345990780091201 ↗
24. Huang, H.-H. Electrochemical impedance spectroscopy study of strained titanium in fluoride media. Electrochim. Acta 47, 2311–2318 (2002).10.1016/S0013-4686(02)00079-8 ↗
25. Kong, D.-S. & Feng, Y.-Y. Electrochemical anodic dissolution kinetics of titanium in fluoride-containing perchloric acid solutions at open-circuit potentials. J. Electrochem. Soc. 156, C283–C291 (2009).10.1149/1.3153148 ↗
26. Wang, Z. B., Hu, H. X. & Zheng, Y. G. Determination and explanation of the pH-related critical fluoride concentration of pure titanium in acidic solutions using electrochemical methods. Electrochim. Acta 170, 300–310 (2015).10.1016/j.electacta.2015.04.165 ↗
27. Fovet, Y., Gal, J.-Y. & Toumelin-Chemla, F. Influence of pH and fluoride concentration on titanium passivating layer: stability of titanium dioxide. Talanta 53, 1053–1063 (2001).10.1016/S0039-9140(00)00592-0 ↗
28. Mareci, D. et al. Effect of acidic fluoride solution on the corrosion resistance of ZrTi alloys for dental implant application. Corros. Sci. 87, 334–343 (2014).10.1016/j.corsci.2014.06.042 ↗
29. Kumar, S., Sankara Narayanan, T. S. N., Ganesh Sundara Raman, S. & Seshadri, S. K. Fretting corrosion behaviour of thermally oxidized CP-Ti in Ringer’s solution. Corros. Sci. 52, 711–721 (2010).10.1016/j.corsci.2009.10.029 ↗
30. Tkachenko, S. et al. Isothermal oxidation behavior of experimental Ti−Al−Si alloys at 700 °C in air. J. Alloy. Compd. 694, 1098–1108 (2017).10.1016/j.jallcom.2016.10.044 ↗
31. Yan, H.-J., Tai, Z.-F., Wu, L.-K. & Cao, F.-H. Improved high-temperature oxidation resistance of TC4 alloy by electrodeposited SiO2 coating. Corros. Commun. 3, 34–44 (2021).10.1016/j.corcom.2021.10.002 ↗
32. Leonardi, S. et al. TiO2 Nanotubes: Interdependence of substrate grain orientation and growth rate. ACS Appl. Mater. Interfaces 7, 1662–1668 (2015).10.1021/am507181p ↗
33. Ebrahimi, A. R., Zarei, F. & Khosroshahi, R. A. Effect of thermal oxidation process on fatigue behavior of Ti-4Al-2V alloy. Surf. Coat. Technol. 203, 199–203 (2008).10.1016/j.surfcoat.2008.08.038 ↗
34. Ningshen, S., Sakairi, M., Suzuki, K. & Okuno, T. Corrosion performance and surface analysis of Ti–Ni–Pd–Ru–Cr alloy in nitric acid solution. Corros. Sci. 91, 120–128 (2015).10.1016/j.corsci.2014.11.010 ↗
35. Steven, Y. Y., Scully, J. R. & Vitus, C. M. Influence of niobium and zirconium alloying additions on the anodic dissolution behavior of activated titanium in HCl solutions. J. Electrochem. Soc. 148, B68 (2001).10.1149/1.1337605 ↗
36. Pan, H. et al. Effect of alloyed Sr on the microstructure and corrosion behavior of biodegradable Mg-Zn-Mn alloy in Hanks’ solution. Corros. Sci. 157, 420–437 (2019).10.1016/j.corsci.2019.06.022 ↗
37. Mazare, A. et al. Corrosion, antibacterial activity and haemocompatibility of TiO2 nanotubes as a function of their annealing temperature. Corros. Sci. 103, 215–222 (2016).10.1016/j.corsci.2015.11.021 ↗
38. Krishna, N. G., George, R. P. & Philip, J. Anomalous enhancement of corrosion resistance and antibacterial property of commercially pure Titanium (CP-Ti) with nanoscale rutile titania film. Corros. Sci. 172, 108678 (2020).10.1016/j.corsci.2020.108678 ↗
39. Lyapin, A., Jeurgens, L. P. H. & Mittemeijer, E. J. Effect of temperature on the initial, thermal oxidation of zirconium. Acta Mater. 53, 2925–2935 (2005).10.1016/j.actamat.2005.03.009 ↗
40. Wen, M., Wen, C., Hodgson, P. & Li, Y. Improvement of the biomedical properties of titanium using SMAT and thermal oxidation. Colloids Surf. B Biointerfaces 116, 658–665 (2014).10.1016/j.colsurfb.2013.10.039 ↗
41. Padma, R., Ramkumar, K. & Satyam, M. Growth of titanium oxide overlayers by thermal oxidation of titanium. J. Mater. Sci. 23, 1591–1597 (1988).10.1007/BF01115696 ↗
42. Istrate, B. et al. Influence of time on thermal oxidation of CP-Ti grade II at 850 °C. Key Eng. Mater. 614, 35–40 (2014).10.4028/www.scientific.net/KEM.614.35 ↗
43. Kofstad, P. High-temperature oxidation of titanium. J. Common Met. 12, 449–464 (1967).10.1016/0022-5088(67)90017-3 ↗
44. Kumar, S., Sankara Narayanan, T. S. N., Ganesh Sundara Raman, S. & Seshadri, S. K. Thermal oxidation of Ti6Al4V alloy: Microstructural and electrochemical characterization. Mater. Chem. Phys. 119, 337–346 (2010).10.1016/j.matchemphys.2009.09.007 ↗
45. Jamesh, M., Sankara Narayanan, T. S. N. & Chu, P. K. Thermal oxidation of titanium: Evaluation of corrosion resistance as a function of cooling rate. Mater. Chem. Phys. 138, 565–572 (2013).10.1016/j.matchemphys.2012.12.020 ↗
46. Güleryüz, H. & Çimenoğlu, H. Effect of thermal oxidation on corrosion and corrosion–wear behaviour of a Ti–6Al–4V alloy. Biomaterials 25, 3325–3333 (2004).10.1016/j.biomaterials.2003.10.009 ↗
47. Barranco, V., Onofre, E., Escudero, M. L. & García-Alonso, M. C. Characterization of roughness and pitting corrosion of surfaces modified by blasting and thermal oxidation. Surf. Coat. Technol. 204, 3783–3793 (2010).10.1016/j.surfcoat.2010.04.051 ↗
48. Wang, S., Liao, Z., Liu, Y. & Liu, W. Influence of thermal oxidation duration on the microstructure and fretting wear behavior of Ti6Al4V alloy. Mater. Chem. Phys. 159, 139–151 (2015).10.1016/j.matchemphys.2015.03.063 ↗
49. Sun, Q., Hu, T., Fan, H., Zhang, Y. & Hu, L. Thermal oxidation behavior and tribological properties of textured TC4 surface: Influence of thermal oxidation temperature and time. Tribol. Int. 94, 479–489 (2016).10.1016/j.triboint.2015.10.013 ↗
50. Hsu, C. H. & Mansfeld, F. Concerning the conversion of the constant phase element parameter Y0 into a capacitance. Corrosion 57, 747–748 (2001).10.5006/1.3280607 ↗
51. Brug, G., van den Eeden, A. L., Sluyters-Rehbach, M. & Sluyters, J. H. The analysis of electrode impedances complicated by the presence of a constant phase element. J. Electroanal. Chem. 176, 275–295 (1984).10.1016/S0022-0728(84)80324-1 ↗
52. Alves, V. A. et al. In situ impedance spectroscopy study of the electrochemical corrosion of Ti and Ti–6Al–4V in simulated body fluid at 25 °C and 37 °C. Corros. Sci. 51, 2473–2482 (2009).10.1016/j.corsci.2009.06.035 ↗
53. Gai, X. et al. Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam melting. Corros. Sci. 145, 80–89 (2018).10.1016/j.corsci.2018.09.010 ↗
54. Kolasinski, K. W. The composition of fluoride solutions. J. Electrochem. Soc. 152, J99 (2005).10.1149/1.1952787 ↗
55. Robin, A. & Meirelis, J. P. Influence of fluoride concentration and pH on corrosion behavior of titanium in artificial saliva. J. Appl. Electrochem. 37, 511–517 (2007).10.1007/s10800-006-9283-z ↗
56. Zhang, H. et al. The corrosion behavior of Ti6Al4V fabricated by selective laser melting in the artificial saliva with different fluoride concentrations and pH values. Corros. Sci. https://doi.org/10.1016/j.corsci.2020.109097 (2020).10.1016/j.corsci.2020.109097 ↗
57. Orazem, M. E. & Tribollet, B. Electrochemical Impedance Spectroscopy (John Wiley & Sons, 2011).
58. Tang, J. et al. The effect of H2S concentration on the corrosion behavior of carbon steel at 90 °C. Corros. Sci. 52, 2050–2058 (2010).10.1016/j.corsci.2010.02.004 ↗
59. Cheng, X., Ma, H., Chen, S., Chen, X. & Yao, Z. Corrosion of nickel in acid solutions with hydrogen sulphide. Corros. Sci. 42, 299–311 (2000).10.1016/S0010-938X(99)00092-X ↗
60. Hernández-López, J. M., Conde, A., de Damborenea, J. J. & Arenas, M. A. Electrochemical response of TiO2 anodic layers fabricated on Ti6Al4V alloy with nanoporous, dual and nanotubular morphology. Corros. Sci. 112, 194–203 (2016).10.1016/j.corsci.2016.07.021 ↗
61. Alves, A. C. et al. Corrosion mechanisms in titanium oxide-based films produced by anodic treatment. Electrochim. Acta 234, 16–27 (2017).10.1016/j.electacta.2017.03.011 ↗
62. Pan, J., Thierry, D. & Leygraf, C. Electrochemical impedance spectroscopy study of the passive oxide film on titanium for implant application. Electrochim. Acta 41, 1143–1153 (1996).10.1016/0013-4686(95)00465-3 ↗
63. Calderon Moreno, J. M. et al. Surface and electrochemical characterization of a new ternary titanium based alloy behaviour in electrolytes of varying pH. Corros. Sci. 77, 52–63 (2013).10.1016/j.corsci.2013.07.026 ↗
64. Ćurković, L., Ćurković, H. O., Salopek, S., Renjo, M. M. & Šegota, S. Enhancement of corrosion protection of AISI 304 stainless steel by nanostructured sol–gel TiO2 films. Corros. Sci. 77, 176–184 (2013).10.1016/j.corsci.2013.07.045 ↗
65. Cui, Z., Li, X., Xiao, K. & Dong, C. Atmospheric corrosion of field-exposed AZ31 magnesium in a tropical marine environment. Corros. Sci. 76, 243–256 (2013).10.1016/j.corsci.2013.06.047 ↗
66. Duarte, L. T., Biaggio, S. R., Rocha-Filho, R. C. & Bocchi, N. Surface characterization of oxides grown on the Ti–13Nb–13Zr alloy and their corrosion protection. Corros. Sci. 72, 35–40 (2013).10.1016/j.corsci.2013.02.007 ↗
67. Zhang, H. et al. Different corrosion behaviors between α and β phases of Ti6Al4V in fluoride-containing solutions: Influence of alloying element Al. Corros. Sci. 169, 108605 (2020).10.1016/j.corsci.2020.108605 ↗