Rapid assessment of structural and compositional changes during early stages of zirconium alloy oxidation
Source abstract
Abstract
Abstract A multimodal chemical imaging approach has been developed and applied to detail the dynamic, atomic-scale changes associated with oxidation of a zirconium alloy (Zircaloy-4). Scanning transmission electron microscopy, a gas-phase reactor chamber attached to an atom probe tomography instrument, and synchrotron-based X-ray absorption near-edge spectroscopy were employed to reveal morphology, composition, crystal, and electronic structure changes that occur during initial stages of oxidation at 300 °C. Oxidation was carried out in 10 mbar O2gas for short exposure times of 1 and 5 min. A multilayered oxide film with a cubic ZrO adjacent to the oxide/metal interface, a nanoscopic transition region with a graded composition of ZrO2−x(where 0 < x < 1), and tetragonal ZrO2in the outermost oxide were formed. Partitioning of the major alloying element (tin) to the oxide/metal interface and heterogeneously within the oxide accompanied the development of the layered oxide. Our work provides a rapid, high-throughput approach for detailed characterisation of initial stages of zirconium alloy oxidation at an accelerated time scale, with implications for several other alloy systems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nuclear Materials and Properties · Advanced Materials Characterization Techniques · Radioactive element chemistry and processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Martin, T. L. et al. Atomic-scale studies of uranium oxidation and corrosion by water vapour. Sci. Rep. 6, 25618 (2016).10.1038/srep25618 ↗
2. Motta, A. T., Couet, A. & Comstock, R. J. Corrosion of zirconium alloys used for nuclear fuel cladding. Annu. Rev. Mater. Res. 45, 311–343 (2015).10.1146/annurev-matsci-070214-020951 ↗
3. Osei-Agyemang, E. & Balasubramanian, G. Surface oxidation mechanism of a refractory high-entropy alloy. npj Mater. Degrad. 3, 20 (2019).10.1038/s41529-019-0082-5 ↗
4. Pflumm, R., Donchev, A., Mayer, S., Clemens, H. & Schütze, M. High-temperature oxidation behavior of multi-phase Mo-containing γ-TiAl-based alloys. Intermetallics 53, 45–55 (2014).10.1016/j.intermet.2014.04.010 ↗
5. Li, T., Marquis, E. A., Bagot, P. A. J., Tsang, S. C. & Smith, G. D. W. Characterization of oxidation and reduction of a platinum–rhodium alloy by atom-probe tomography. Catal. Today 175, 552–557 (2011).10.1016/j.cattod.2011.03.046 ↗
6. Lambeets, S. V., Visart de Bocarmé, T., Perea, D. E. & Kruse, N. Directional gateway to metal oxidation: 3D chemical mapping unfolds oxygen diffusional pathways in rhodium nanoparticles. J. Phys. Chem. Lett. 11, 3144–3151 (2020).10.1021/acs.jpclett.0c00321 ↗
7. Pedrazzini, S. et al. In-service oxidation and microstructural evolution of a nickel superalloy in a formula 1 car exhaust. Oxid. Met. 89, 375–394 (2018).10.1007/s11085-017-9792-7 ↗
8. Tuominen, M. et al. Oxidation-induced changes in the ALD-Al2O3/InAs(100) interface and control of the changes for device processing. ACS Appl. Mater. Interfaces 10, 44932–44940 (2018).10.1021/acsami.8b17843 ↗
9. Zhao, D., Tian, C., Tang, S., Liu, Y. & Chen, L. High temperature oxidation behavior of cobalt triantimonide thermoelectric material. J. Alloy. Compd. 504, 552–558 (2010).10.1016/j.jallcom.2010.05.160 ↗
10. Blades, W. H. & Reinke, P. From alloy to oxide: capturing the early stages of oxidation on Ni–Cr(100) alloys. ACS Appl. Mater. Interfaces 10, 43219–43229 (2018).10.1021/acsami.8b15210 ↗
11. Luo, L. et al. In situ atomic scale visualization of surface kinetics driven dynamics of oxide growth on a Ni–Cr surface. Chem. Commun. 52, 3300–3303 (2016).10.1039/C5CC09165A ↗
12. Lemaignan, C. & Motta, A. T. in Materials Science and Technology (eds Cahn, R. W., Haasen, P. & Kramer, E. J.) Ch. 7 (Wiley, 2006).
13. Rickover, H. G., Geiger, L. D. & Lustman, B. History of the Development of Zirconium Alloys for Use in Nuclear Reactors (International Atomic Energy Agency, 1975).10.2172/4240391 ↗
14. Reid, B. D. & Lanning, D. D. Tritium-producing burnable absorber rod and its inherent safety features. Trans. Am. Nucl. Soc. 82, 285 (2000).
15. Luscher, W. G., Senor, D. J., Clayton, K. K. & Longhurst, G. R. In-reactor oxidation of zircaloy-4 under low water vapor pressures. J. Nucl. Mater. 456, 17–22 (2015).10.1016/j.jnucmat.2014.08.053 ↗
16. Douglass, D. L. Metallurgy of Zirconium (International Atomic Energy Agency, 1971).
17. Duan, Z. et al. Current status of materials development of nuclear fuel cladding tubes for light water reactors. Nucl. Eng. Des. 316, 131–150 (2017).10.1016/j.nucengdes.2017.02.031 ↗
18. Sayers, J., Lozano-Perez, S., Nicholls, R. J. & Ortner, S. A high-resolution characterization of the oxide-metal interface in Zircaloy-4 and its relation to the oxidation and hydrogen pickup mechanisms. J. Nucl. Mater. 525, 72–82 (2019).10.1016/j.jnucmat.2019.07.008 ↗
19. Ni, N. et al. How the crystallography and nanoscale chemistry of the metal/oxide interface develops during the aqueous oxidation of zirconium cladding alloys. Acta Mater. 60, 7132–7149 (2012).10.1016/j.actamat.2012.09.021 ↗
20. Beie, H.-J., Mitwalsky, A., Garzarolli, F., Ruhmann, H. & Sell, H.-J. Examinations of the corrosion mechanism of zirconium alloys. In Zirconium in the Nuclear Industry: Tenth International Symposium (eds Bradley, E. & Sabol, G.) 615–643 (ASTM International, 1994).10.1520/STP15212S ↗
21. Pecheur, D., Godlewski, J., Billot, P. & Thomazet, J. Microstructure of oxide films formed during the waterside corrosion of the Zircaloy-4 cladding in lithiated environment. In Zirconium in the Nuclear Industry: Eleventh International Symposium (eds Bradley, E. & Sabol, G.) 94–113 (ASTM International, 1996).10.1520/STP16169S ↗
22. Motta, A. et al. Microstructural characterization of oxides formed on model Zr alloys using synchrotron radiation. J. ASTM Int. 5, 1–20 (2008).10.1520/JAI101257 ↗
23. Ahmed, T. & Keys, L. H. The breakaway oxidation of zirconium and its alloys a review. J. Less Common Met. 39, 99–107 (1975).10.1016/0022-5088(75)90220-9 ↗
24. Glazoff, M., Tokuhiro, A., Rashkeev, S. & Sabharwall, P. Oxidation and hydrogen uptake in zirconium, Zircaloy-2 and Zircaloy-4: computational thermodynamics and ab initio calculations. J. Nucl. Mater. 444, 65–75 (2014).10.1016/j.jnucmat.2013.09.038 ↗
25. Cox, B. Processes occurring during the breakdown of oxide films on zirconium alloys. J. Nucl. Mater. 29, 50–66 (1969).10.1016/0022-3115(69)90126-3 ↗
26. Young, D. J. High Temperature Oxidation and Corrosion of Metals (Elsevier, 2008).
27. De Gabory, B., Dong, Y., Motta, A. T. & Marquis, E. A. EELS and atom probe tomography study of the evolution of the metal/oxide interface during zirconium alloy oxidation. J. Nucl. Mater. 462, 304–309 (2015).10.1016/j.jnucmat.2015.03.043 ↗
28. de Gabory, B., Motta, A. T. & Wang, K. Transmission electron microscopy characterization of Zircaloy-4 and ZIRLO™ oxide layers. J. Nucl. Mater. 456, 272–280 (2015).10.1016/j.jnucmat.2014.09.073 ↗
29. Dong, Y., Motta, A. T. & Marquis, E. A. Atom probe tomography study of alloying element distributions in Zr alloys and their oxides. J. Nucl. Mater. 442, 270–281 (2013).10.1016/j.jnucmat.2013.08.055 ↗
30. Dong, Y., Motta, A. T. & Marquis, E. A. Multi-scale characterization of oxidized zirconium alloys. Microsc. Microanal. 22, 1496–1497 (2016).10.1017/S1431927616008321 ↗
31. Sundell, G., Thuvander, M. & Andrén, H. O. Tin clustering and precipitation in the oxide during autoclave corrosion of Zircaloy-2. J. Nucl. Mater. 456, 409–414 (2015).10.1016/j.jnucmat.2014.10.003 ↗
32. Yilmazbayhan, A., Breval, E., Motta, A. T. & Comstock, R. J. Transmission electron microscopy examination of oxide layers formed on Zr alloys. J. Nucl. Mater. 349, 265–281 (2006).10.1016/j.jnucmat.2005.10.012 ↗
33. Yilmazbayhan, A. et al. Structure of zirconium alloy oxides formed in pure water studied with synchrotron radiation and optical microscopy: relation to corrosion rate. J. Nucl. Mater. 324, 6–22 (2004).10.1016/j.jnucmat.2003.08.038 ↗
34. Luo, L. et al. In-situ transmission electron microscopy study of surface oxidation for Ni–10Cr and Ni–20Cr alloys. Scr. Mater. 114, 129–132 (2016).10.1016/j.scriptamat.2015.11.031 ↗
35. Wang, C.-M., Schreiber, D. K., Olszta, M. J., Baer, D. R. & Bruemmer, S. M. Direct in situ TEM observation of modification of oxidation by the injected vacancies for Ni–4Al alloy using a microfabricated nanopost. ACS Appl. Mater. Interfaces 7, 17272–17277 (2015).10.1021/acsami.5b04341 ↗
36. Bagot, P. A. J., Visart de Bocarmé, T., Cerezo, A. & Smith, G. D. W. 3D atom probe study of gas adsorption and reaction on alloy catalyst surfaces I: Instrumentation. Surf. Sci. 600, 3028–3035 (2006).10.1016/j.susc.2006.05.026 ↗
37. Li, T., Bagot, P. A. J., Marquis, E. A., Tsang, S. C. E. & Smith, G. D. W. Characterization of oxidation and reduction of Pt–Ru and Pt–Rh–Ru alloys by atom probe tomography and comparison with Pt–Rh. J. Phys. Chem. C 116, 17633–17640 (2012).10.1021/jp304359m ↗
38. McCarroll, I. E. et al. The effect of hydrogen on the early stages of oxidation of a magnesium alloy. Corros. Sci. 165, 108391 (2020).10.1016/j.corsci.2019.108391 ↗
39. Lambeets, S. V., Kautz, E. J., Wirth, M. G., Orren, G. J., Devaraj, A. & Perea, D. E. Nanoscale perspectives of metal degradation via in situ atom probe tomography. Top. Cat. S https://doi.org/10.1007/s11244-020-01367-z.10.1007/s11244-020-01367-z ↗
40. Abriata, J. P., Garcés, J. & Versaci, R. The O−Zr (oxygen-zirconium) system. Bull. Alloy Phase Diagr. 7, 116–124 (1986).10.1007/BF02881546 ↗
41. Steuwer, A. et al. Evidence of stress-induced hydrogen ordering in zirconium hydrides. Acta Mater. 57, 145–152 (2009).10.1016/j.actamat.2008.08.061 ↗
42. Gauna, M. R. et al. Monoclinic-tetragonal zirconia quantification of commercial nanopowder mixtures by XRD and DTA. Ceram. Silik. 59, 318–325 (2015).
43. Rawat, M. et al. Micro-Raman and electronic structure study on kinetics of electronic excitations induced monoclinic-to-tetragonal phase transition in zirconium oxide films. RSC Adv. 6, 104425–104432 (2016).10.1039/C6RA14199D ↗
44. Varshney, M., Sharma, A., Chae, K. H., Kumar, S. & Won, S. O. Electronic structure and dielectric properties of ZrO2-CeO2 mixed oxides. J. Phys. Chem. Solids 119, 242–250 (2018).10.1016/j.jpcs.2018.04.007 ↗
45. Soriano, L. et al. The O-1s X-ray-absorption spectra of transition-metal oxides - the TiO2−ZrO2−HfO2 and V2O5−Nb2O5−Ta2O5 series. Solid State Commun. 87, 699–703 (1993).10.1016/0038-1098(93)90209-6 ↗
46. Kikas, A. et al. Effect of phase composition on X-ray absorption spectra of ZrO2 thin films. J. Electron Spectrosc. Relat. Phenom. 156–158, 303–306 (2007).10.1016/j.elspec.2006.11.031 ↗
47. Sabol, G. P., McDonald, S. G. & Airey, G. P. in Zirconium in Nuclear Applications (eds Schemel, J. & Rosenbaum, H.) 435–448 (ASTM International, 1974).10.1520/STP32130S ↗
48. Pétigny, N., Barberis, P., Lemaignan, C., Valot, C. & Lallemant, M. In situ XRD analysis of the oxide layers formed by oxidation at 743 K on Zircaloy 4 and Zr–1NbO. J. Nucl. Mater. 280, 318–330 (2000).10.1016/S0022-3115(00)00051-9 ↗
49. Oskarsson, M., Ahlberg, E., Andersson, U. & Pettersson, K. Characterisation of pre-transition oxides on Zircaloys. J. Nucl. Mater. 297, 77–88 (2001).10.1016/S0022-3115(01)00580-3 ↗
50. Zhang, H. X. et al. Crystal structure, corrosion kinetics of new zirconium alloys and residual stress analysis of oxide films. J. Nucl. Mater. 396, 65–70 (2010).10.1016/j.jnucmat.2009.10.055 ↗
51. Wei, J. et al. The effect of Sn on autoclave corrosion performance and corrosion mechanisms in Zr–Sn–Nb alloys. Acta Mater. 61, 4200–4214 (2013).10.1016/j.actamat.2013.03.046 ↗
52. Nakamura, J., Hashimoto, M., Otomo, T. & Kawasaki, S. Effects of oxygen partial pressure on oxidation of Zircaloy. J. Nucl. Mater. 200, 256–264 (1993).10.1016/0022-3115(93)90336-W ↗
53. Boggs, W. E., Kachik, R. H. & Pellissier, G. E. The effects of crystallographic orientation and oxygen pressure on the oxidation of iron. J. Electrochem. Soc. 114, 32 (1967).10.1149/1.2426502 ↗
54. Stott, F. H. The protective action of oxide scales in gaseous environments at high temperature. Rep. Prog. Phys. 50, 861 (1987).10.1088/0034-4885/50/7/002 ↗
55. Wang, C. M. et al. Void formation during early stages of passivation: initial oxidation of iron nanoparticles at room temperature. J. Appl. Phys. 98, 094308 (2005).10.1063/1.2130890 ↗
56. Bespalov, I. et al. Initial stages of oxide formation on the Zr surface at low oxygen pressure: an in situ FIM and XPS study. Ultramicroscopy 159, 147–151 (2015).10.1016/j.ultramic.2015.02.016 ↗
57. Anada, H. & Takeda, K. Microstructure of oxides on Zircaloy-4, 1.0 Nb Zircaloy-4, and Zircaloy-2 formed in 10.3-MPa steam at 673 K. In Zirconium in the Nuclear Industry: Eleventh International Symposium (eds Bradley, E. & Sabol, G.) 35–54 (ASTM International, 1996).10.1520/STP16166S ↗
58. Baek, J. H. & Jeong, Y. H. Steam oxidation of Zr–1.5 Nb–0.4 Sn–0.2 Fe–0.1 Cr and Zircaloy-4 at 900–1200 °C. J. Nucl. Mater. 361, 30–40 (2007).10.1016/j.jnucmat.2006.10.015 ↗
59. Guilbert, S. et al. in Zirconium in the Nuclear Industry, Vol. 17 (eds Comstock, B. & Barberis, P.) 952–978 (ASTM International, 2015).
60. Kim, H.-G., Park, J.-Y., Choi, B.-K. & Jeong, Y.-H. Evaluation of pre-transition oxide on Zr–0.4 Nb alloy by using the HVEM. J. Nucl. Mater. 374, 204–210 (2008).10.1016/j.jnucmat.2007.08.003 ↗
61. Moseley, P. T. & Hudson, B. Phases involved in the corrosion of zircaloy by hot water (350 °C). J. Nucl. Mater. 99, 340–344 (1981).10.1016/0022-3115(81)90206-3 ↗
62. Gault, B. et al. Behavior of molecules and molecular ions near a field emitter. N. J. Phys. 18, 033031 (2016).10.1088/1367-2630/18/3/033031 ↗
63. Karahka, M., Xia, Y. & Kreuzer, H. J. The mystery of missing species in atom probe tomography of composite materials. Appl. Phys. Lett. 107, 062105 (2015).10.1063/1.4928625 ↗
64. Bachhav, M., Danoix, F., Hannoyer, B., Bassat, J. M. & Danoix, R. Investigation of O-18 enriched hematite (α-Fe2O3) by laser assisted atom probe tomography. Int. J. Mass Spectrom. 335, 57–60 (2013).10.1016/j.ijms.2012.10.012 ↗
65. Devaraj, A., Colby, R., Hess, W. P., Perea, D. E. & Thevuthasan, S. Role of photoexcitation and field ionization in the measurement of accurate oxide stoichiometry by laser-assisted atom probe tomography. J. Phys. Chem. Lett. 4, 993–998 (2013).10.1021/jz400015h ↗
66. Devaraj, A. et al. Three-dimensional nanoscale characterisation of materials by atom probe tomography. Int. Mater. Rev. 63, 68–101 (2018).10.1080/09506608.2016.1270728 ↗
67. Felfer, P. J., Alam, T., Ringer, S. P. & Cairney, J. M. A reproducible method for damage‐free site‐specific preparation of atom probe tips from interfaces. Microsc. Res. Tech. 75, 484–491 (2012).10.1002/jemt.21081 ↗
68. Perea, D. E., Gerstl, S. S. A., Chin, J., Hirschi, B. & Evans, J. E. An environmental transfer hub for multimodal atom probe tomography. Adv. Struct. Chem. Imaging 3, 12 (2017).10.1186/s40679-017-0045-2 ↗