Advanced zinc-polymer composites for marine corrosion protection and self-healing
Source abstract
Abstract
Steel corrosion in saltwater costs over $2.5 trillion annually. This review highlights advancements in zinc and polymer-based coatings for marine protection. It covers traditional methods and emerging technologies like nanoparticle-enhanced alloys, conducting polymers, metal organic frameworks (MOFs), and 2D materials. These offer improved resistance, self-healing, and intelligent protection with a future focus on sustainability and extended service life for marine infrastructure.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Polymer composites and self-healing · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Schmitt, G. et al. Global Needs for Knowledge Dissemination, Research, and Development in Materials Deterioration and Corrosion Control (The World Corrosion Organization, 2009).
2. Hou, B. et al. The cost of corrosion in China. npj Mater. Degrad. 1, 4 (2017).10.1038/s41529-017-0005-2 ↗
3. Cai, Y., Zhao, Y., Ma, X., Zhou, K. & Chen, Y. Influence of environmental factors on atmospheric corrosion in dynamic environment. Corros. Sci. 137, 163–175 (2018).10.1016/j.corsci.2018.03.042 ↗
4. Ji, H., Wang, H., Chen, Q., Ma, X. & Cai, Y. Corrosion behavior prediction for hull steels under dynamic marine environments by jointly utilizing LSTM network and PSO-RF model. Ocean Eng. 300, 117371 (2024).10.1016/j.oceaneng.2024.117371 ↗
5. Bojinov, M., Betova, I., Ivanova, N. & Karastoyanov, V. Influence of temperature and flow rate on erosion–corrosion of low-alloy steel in simulated steam generator conditions. Materials 18, 944 (2025).10.3390/ma18050944 ↗
6. Yao, J. et al. The fitness and corrosion mechanisms of high-strength steel in corrosive oil–water environment at high temperature. Mater. Corros. 75, 247–265 (2024).10.1002/maco.202313912 ↗
7. Iannuzzi, M. & Frankel, G. S. The carbon footprint of steel corrosion. npj Mater. Degrad. 6, 101 (2022).10.1038/s41529-022-00318-1 ↗
8. Raabe, D. et al. Circular steel for fast decarbonization: thermodynamics, kinetics, and microstructure behind upcycling scrap into high-performance sheet steel. Annu. Rev. Mater. Res. 54, 247–297 (2024).10.1146/annurev-matsci-080222-123648 ↗
9. Hernandez, M. & Arroyave, C. Corrosion and protection challenges and opportunities in the frame of a circular economy. In NACE International Corrosion Conference Series 1–13 (NACE Corrosion, 2020).10.5006/C2020-15039 ↗
10. Tang, D. Z. et al. Effect of pH value on corrosion of carbon steel under an applied alternating current. Mater. Corros. 66, 1467–1479 (2015).10.1002/maco.201508365 ↗
11. Xu, Y., Zhang, Q., Chen, H., Zhao, Y. & Huang, Y. Experimental study on erosion-corrosion of carbon steel in flowing NaCl solution of different pH. J. Mater. Res. Technol. 20, 4432–4451 (2022).10.1016/j.jmrt.2022.09.012 ↗
12. Watson, J., Balmforth, V., Gray, E. & Unthank, M. G. pH-responsive, thermoset polymer coatings for active protection against aluminum corrosion. ACS Appl. Mater. Interfaces 16, 12986–12995 (2024).10.1021/acsami.3c14752 ↗
13. Liu, C. & Li, X. Steel Corrosion and Metallurgical Factors: Laws and Mechanisms (Wiley, 2025).10.1002/9783527853106 ↗
14. Yang, S. & Gao, X. Corrosion resistance behavior of a new type of weathering steel in simulated environments with different pH values. Corrosion https://doi.org/10.5006/4734 (2025).10.5006/4734 ↗
15. Hernández, H. H. et al. Electrochemical impedance spectroscopy (EIS): a review study of basic aspects of the corrosion mechanism applied to steels. in Electrochemical Impedance Spectroscopy (IntechOpen, 2020). https://doi.org/10.5772/intechopen.94470.10.5772/intechopen.94470 ↗
16. Kakinuma, H. et al. In situ 2D visualization of hydrogen entry into Zn-coated steels in NaCl solutions: roles of Zn dissolution and potential distribution. Corros. Sci. 258, 113386 (2025).10.1016/j.corsci.2025.113386 ↗
17. Alexander, C. L., Agbakansi, S. C. & De Carvalho Bezerra, W. V. D. Addressing geometric influences on electrochemical impedance spectroscopy for accurate corrosion assessment in steel-reinforced concrete beams. Corros. Sci. 247, 112703 (2025).10.1016/j.corsci.2025.112703 ↗
18. Wu, H., Hu, J., Zhong, X., Zhou, X. & Liu, Y. The preparation of a hydrochromic film and its application in the visualization of localized corrosion. Anti-Corros. Methods Mater. 72, 523–532 (2025).10.1108/ACMM-11-2024-3137 ↗
19. Ciężak, P. et al. Using corrosion health monitoring systems to detect corrosion: real-time monitoring to maintain the integrity of the structure. Fatigue Aircr. Struct. 2023, 166–182 (2023).10.2478/fas-2023-0011 ↗
20. Shi, Y. et al. Surface modification on biodegradable zinc alloys. J. Mater. Res. Technol. 25, 3670–3687 (2023).10.1016/j.jmrt.2023.06.149 ↗
21. Maji, K. & Lavanya, M. Microbiologically influenced corrosion in stainless steel by Pseudomonas aeruginosa: an overview. J. Bio. Tribo. Corros. 10, 16 (2024).10.1007/s40735-024-00820-w ↗
22. Jo, H. J. et al. Blackening phenomenon and corrosion resistance of Zn-Mg alloy coated steel by steam treatment. Appl. Surf. Sci. 672, 160838 (2024).10.1016/j.apsusc.2024.160838 ↗
23. Liu, Y. et al. Corrosion mechanism of a high corrosion-resistance Zn–Al–Mg coating in typical extremely harsh marine and cold environments. J. Mater. Res. Technol. 33, 4290–4302 (2024).10.1016/j.jmrt.2024.10.080 ↗
24. Ali, S. I. & Ahmad, S. N. Microbiologically influenced corrosion in uncoated and coated mild steel. Sci. Rep. 15, 12629 (2025).10.1038/s41598-025-90003-5 ↗
25. Perez, N. in Materials Science: Theory and Engineering 835–898 (Springer, Cham, 2024).10.1007/978-3-031-57152-7_16 ↗
26. Shan, X., Zou, Z., Mi, Z., Tong, K. & Hou, C. Preparation of smart self-healing coatings on zinc surfaces using halloysite nanotubes loaded with corrosion inhibitors. Langmuir 40, 25236–25249 (2024).10.1021/acs.langmuir.4c03529 ↗
27. Wang, R. et al. Construction of smart coatings containing core-shell nanofibers with self-healing and active corrosion protection. ACS Appl. Mater. Interfaces 16, 42748–42761 (2024).10.1021/acsami.4c09260 ↗
28. Nunes, F. G., Bendinelli, E. V. & Aoki, I. V. Microcapsules containing dehydrated castor oil as self-healing agent for smart anticorrosive coatings. Prog. Org. Coat. 197, 108863 (2024).10.1016/j.porgcoat.2024.108863 ↗
29. Dehghan-Chenar, S., Zare, H. R. & Mohammadpour, Z. Fabrication of a curcumin@Cu-BTC MOF smart anti-corrosion coating for copper. ChemistrySelect 8, e202303392 (2023).10.1002/slct.202303392 ↗
30. Chen, Z. et al. Synthesis of Mn-MOFs loaded zinc phosphate composite for water-based acrylic coatings with durable anticorrosion performance on mild steel. RSC Adv. 11, 3371–3379 (2021).10.1039/D0RA09753E ↗
31. Veysi, A., Roushani, M. & Najafi, H. Synthesis and evaluation of CuNi-MOF as a corrosion inhibitor of AISI 304 and 316 stainless steel in 1N HCl solution. Heliyon 11, e41296 (2024).10.1016/j.heliyon.2024.e41296 ↗
32. Sivaranjana, P. et al. Enhanced anti-corrosion characteristics of epoxy-functionalized graphene oxide nanocomposite coatings on mild steel substrates. J. Mater. Res. Technol. 32, 3234–3245 (2024).10.1016/j.jmrt.2024.08.175 ↗
33. Heiser, J. H. & Soo, P. Corrosion of Barrier Materials in Seawater Environments (Brookhaven National Lab., 1995).10.2172/125170 ↗
34. Bautin, V. A., Bardin, I. V., Kvaratskheliya, A. R., Yashchuk, S. V. & Hristoforou, E. V. Effect of graphene oxide addition on the anticorrosion properties of the phosphate coatings in neutral and acidic aqueous media. Materials 15, 6588 (2022).10.3390/ma15196588 ↗
35. Hansen, C. J. in Recent Advances in Smart Self-Healing Polymers and Composites 2nd edn 141–176 (Woodhead Publishing, 2022).10.1016/B978-0-12-823472-3.00014-X ↗
36. Liu, T. et al. Self-healing and corrosion-sensing coatings based on pH-sensitive MOF-capped microcontainers for intelligent corrosion control. Chem. Eng. J. 454, 140335 (2023).10.1016/j.cej.2022.140335 ↗
37. Boidi, G. et al. Solid lubrication performance of hybrid Ti3C2Tx/MoS2 coatings. Carbon 225, 119067 (2024).10.1016/j.carbon.2024.119067 ↗
38. Yang, C. et al. Optimization of tribological properties and corrosion resistance of MAO coatings on LY12 aluminum alloy by co-doping with graphite particles and in situ formation of zinc phosphate. Ceram. Int. 50, 46018–46031 (2024).10.1016/j.ceramint.2024.08.443 ↗
39. Song, W. et al. Development of anti-corrosion coating with sandwich-like microvascular network for realization of self-healing and self-reporting properties based on coaxial electrospinning. Prog. Org. Coat. 196, 108744 (2024).10.1016/j.porgcoat.2024.108744 ↗
40. Vucko, F., Helbert, V. S. & Nazarov, A. Quantification of hydrogen flux from atmospheric corrosion of steel using the scanning kelvin probe technique. Metals 13, 1427 (2023).10.3390/met13081427 ↗
41. Wan, H., Wang, Y. & Zhao, Y. In-situ Raman spectroelectrochemistry for characterization of steel corrosion products in simulated concrete pore solution. J. Build. Eng. 111, 113098 (2025).10.1016/j.jobe.2025.113098 ↗
42. Ruiz, D. et al. Advanced machine learning techniques for corrosion rate estimation and prediction in industrial cooling water pipelines. Sensors 24, 3564 (2024).10.3390/s24113564 ↗
43. Das, A., Dorafshan, S. & Kaabouch, N. Autonomous image-based corrosion detection in steel structures using deep learning. Sensors 24, 3630 (2024).10.3390/s24113630 ↗
44. Okuma, S. O., Ogagavwodia, E. O., Ajokperiniovo, V. E. & Emurotu, J. E. Performance of acetone extract of Anthocleista grandiflora as a potential bioinhibitor on corrosion behavior of carbon steel in seawater environment. Period. Polytech. Chem. Eng. 68, 597–608 (2024).10.3311/PPch.37241 ↗
45. Wang, J. et al. Towards weathering and corrosion resistant, self-warning and self-healing epoxy coatings with tannic acid loaded nanocontainers. npj Mater. Degrad. 7, 39 (2023).10.1038/s41529-023-00360-7 ↗
46. Yu, S. P. & Tai, H. J. Sol–gel enhanced polyurethane coating for corrosion protection of 55% Al-Zn alloy-coated steel. J. Polym. Res. 28, 158 (2021).10.1007/s10965-021-02514-0 ↗
47. Nakano, A. et al. Study on initial corrosion behavior of arc-thermally spray Zn, Zn–Al, and Al–Mg coatings exposed in atmospheric environment for one-year. Int. J. Steel Struct. 24, 1395–1405 (2024).10.1007/s13296-024-00893-w ↗
48. Yadav, M., Saha, J. K. & Ghosh, S. K. Surface, chemical, and mechanical properties of polyurethane-coated galvanized steel sheets. J. Mater. Eng. Perform. 34, 1177–1192 (2025).10.1007/s11665-024-09171-6 ↗
49. Huang, Y. Y. & Wu, J. Preparation and characterization of graphene oxide/polyaniline/carbonyl iron nanocomposites. Materials 15, 484 (2022).10.3390/ma15020484 ↗
50. Răuță, D. I., Matei, E. & Avramescu, S. M. Recent development of corrosion inhibitors: types, mechanisms, electrochemical behavior, efficiency, and environmental impact. Technologies 13, 103 (2025).10.3390/technologies13030103 ↗
51. Tian, Q., Yang, Q. M., Lin, Y. C., Wang, J. Q. & Zhu, X. H. Effects of aging treatment on corrosion behavior of a tensile deformed Al-Cu-Mn-Fe-Zr alloy in 3.5% NaCl solution. Materials 14, 5062 (2021).10.3390/ma14175062 ↗
52. Anita, N. et al. in Electrochemical and Analytical Techniques for Sustainable Corrosion Monitoring: Advances, Challenges and Opportunities 59–80 (Elsevier, 2023).10.1016/B978-0-443-15783-7.00005-0 ↗
53. Shin, D. H., Hwang, H. K., Kim, H. H. & Lee, J. H. Evaluation of commercial corrosion sensors for real-time monitoring of pipe wall thickness under various operational conditions. Sensors 22, 7562 (2022).10.3390/s22197562 ↗
54. Cristiani, P. et al. Fundamentals and critical appraisal of electrochemical techniques for investigating microbial corrosion. Corros. Sci. 246, 112694 (2025).10.1016/j.corsci.2025.112694 ↗
55. Dewi, M. S., Sancharoen, P., Klomjit, P. & Tangtermsirikul, S. Effects of zinc alloy layer on corrosion and service life of galvanized reinforcing steels in chloride-contaminated concrete. J. Build. Eng. 68, 106153 (2023).10.1016/j.jobe.2023.106153 ↗
56. Liu, Q. et al. Hot-dip galvanizing process and the influence of metallic elements on composite coatings. J. Compos. Sci. 8, 160 (2024).10.3390/jcs8050160 ↗
57. Li, S. et al. The effects of RE and Si on the microstructure and corrosion resistance of Zn–6Al–3Mg hot dip coating. Appl. Surf. Sci. 357, 2004–2012 (2015).10.1016/j.apsusc.2015.09.172 ↗
58. Umoren, S. A. et al. Solvent selection and studies of the anti-corrosion efficacy of Heliotropium curassavicum leaves extract on API L X60 steel in 5 wt% hydrochloric acid solution. J. Mater. Res. Technol. 30, 8705–8717 (2024).10.1016/j.jmrt.2024.05.218 ↗
59. Zhang, X. G. Galvanic corrosion of zinc and its alloys. J. Electrochem. Soc. 143, 1472–1484 (1996).10.1149/1.1836662 ↗
60. Peng, Y. et al. Galvanic corrosion between Al–Zn–Mg–Cu alloy and stainless steel in the salt-spray atmosphere. Mater. Chem. Phys. 294, 127009 (2023).10.1016/j.matchemphys.2022.127009 ↗
61. Anwar, S., Zhang, Y. & Khan, F. Electrochemical behaviour and analysis of Zn and Zn–Ni alloy anti-corrosive coatings deposited from citrate baths. RSC Adv. 8, 28861–28873 (2018).10.1039/C8RA04650F ↗
62. Chen, Z. et al. Corrosion-oriented self-healing coating based on ZnMg MOF for efficient corrosion protection of aluminum alloy via in-situ LDH film formation. Chem. Eng. J. 500, 156898 (2024).10.1016/j.cej.2024.156898 ↗
63. Grachev, V. A., Rozen, A. E., Perelygin, Y. P., Kireev, S. Y. & Los, I. S. Multilayer corrosion-resistant material based on iron–carbon alloys. Heliyon 6, e04039 (2020).10.1016/j.heliyon.2020.e04039 ↗
64. Peng, H. et al. Study on corrosion mechanism of N80 steel pipe columns and threads by CO2-Cl− in shale gas. J. Mater. Eng. Perform. https://doi.org/10.1007/s11665-024-10210-5 (2024)10.1007/s11665-024-10210-5 ↗
65. Goyal, K., Singh, H. & Bhatia, R. Cyclic high temperature corrosion studies of carbon nanotubes-Cr2O3 composite coatings on boiler steel at 900 °C in molten salt environment. Anti-Corros. Methods Mater. 65, 646–657 (2018).10.1108/ACMM-06-2018-1954 ↗
66. Medvedovski, E., Roghanizad, M., Leal Mendoza, G., Cai, W. & Hendricks, R. W. Influence of iron boride coating on flow-accelerated corrosion of carbon steel. Adv. Eng. Mater. 22, 2000354 (2020).10.1002/adem.202000354 ↗
67. Gao, W. et al. Laser cladding of titanium alloy coating on low carbon steel via Cu interlayer. Mater. Sci. Forum 1071, 80–90 (2022).10.4028/p-x6zdo8 ↗
68. Martins, N. et al. Characterization of iron aluminide diffusion coatings obtained after friction surfacing. Metals 13, 461 (2023).10.3390/met13030461 ↗
69. Sapkota, S. C. et al. A paradigm shift in corrosion inhibition using botanical extracts: from conventional methods to advanced methods for reinforcing steel. Innov. Infrastruct. Solut. 10, 104 (2025).10.1007/s41062-025-01902-5 ↗
70. Shirazi, Z., Golikand, A. N. & Keshavarz, M. H. Synthesis of the new binary nanocomposites using graphene oxide and carbon nanotubes in poly (aniline-co-anthranilic acid) copolymer bed as corrosion inhibitor for SS316 in hydrochloric acid media. J. Iran. Chem. Soc. 21, 409–419 (2024).10.1007/s13738-023-02933-4 ↗
71. Touir, R. et al. Experimental and computational chemistry investigation of the molecular structures of new synthetic quinazolinone derivatives as acid corrosion inhibitors for mild steel. J. Mol. Struct. 1303, 137499 (2024).10.1016/j.molstruc.2024.137499 ↗
72. Abdou, M. M. & EL-Haddad, M. N. Novel eco-friendly quinolinone derivative as a water-soluble corrosion inhibitor for low carbon steel: synthesis, inhibitive efficacy, and DFT analysis. J. Mol. Struct. 1324, 140889 (2025).10.1016/j.molstruc.2024.140889 ↗
73. Goswami, R. N., Mourya, P., Behera, B., Khatri, O. P. & Ray, A. Graphene-polyaniline nanocomposite based coatings: role of convertible forms of polyaniline to mitigate steel corrosion. Appl. Surf. Sci. 599, 153939 (2022).10.1016/j.apsusc.2022.153939 ↗
74. Sharma, I. et al. Development of corrosion-resistant epoxy-reclaimed waste foundry sand fines composite coating. Discov. Mater. 5, 102 (2025).10.1007/s43939-025-00247-1 ↗
75. Stelmach, S. et al. General evaluation of the recyclability of polyester-glass laminates used to reinforce steel tanks. Sustainability 17, 4199 (2025).10.3390/su17094199 ↗
76. Gao, Y., Kainuma, S., Yang, M., Ishihara, S. & Inoue, D. Galvanic corrosion behavior of hot-dip Al and 55Al–Zn coatings applied to steel bolted joints in atmospheric environments. Constr. Build. Mater. 401, 132694 (2023).10.1016/j.conbuildmat.2023.132694 ↗
77. Lv, J. et al. Chloride ion binding in cementitious materials: a review of influencing factors and control methods. Case Stud. Constr. Mater. 22, e04201 (2025).
78. Ho, C. Y. & Wang, J. Y. Investigation of microstructure related to corrosion evolution, mechanical and electrochemical properties on doped Si of binary Zn–Al coating. Mater. Chem. Phys. 301, 127656 (2023).10.1016/j.matchemphys.2023.127656 ↗
79. Gugua, E. C., Ujah, C. O., Asadu, C. O., Von Kallon, D. V. & Ekwueme, B. N. Electroplating in the modern era, improvements and challenges: a review. Hybrid. Adv. 7, 100286 (2024).10.1016/j.hybadv.2024.100286 ↗
80. Biswal, H. J., Srivastava, T., Vundavilli, P. R. & Gupta, A. Facile fabrication of hydrophobic ZnO nanostructured nickel microtubes through pulse electrodeposition as promising photocatalyst for wastewater remediation. J. Manuf. Process. 75, 538–551 (2022).10.1016/j.jmapro.2022.01.001 ↗
81. Giurlani, W. et al. What is the current state of sustainability in the decorative electroplating industry? A close look at new practices and advances. Sustainability 16, 5821 (2024).10.3390/su16135821 ↗
82. Anthony, J. R. & Pearson, T. Zinc alloy electroplating baths and processes. European patent EP2350355B1 (2009).
83. Zhang, M., Ma, L., Wang, L., Sun, Y. & Liu, Y. Insights into the use of metal-organic framework as high-performance anticorrosion coatings. ACS Appl. Mater. Interfaces 10, 2259–2263 (2018).10.1021/acsami.7b18713 ↗
84. Etaiw, S. E. H., Hassan, G. S., El-Hossiany, A. A. & Fouda, A. S. Nano-metal–organic frameworks as corrosion inhibitors for strengthening anti-corrosion behavior of carbon steel in a sulfuric acid environment: from synthesis to applications. RSC Adv. 13, 15222–15235 (2023).10.1039/D3RA01644G ↗
85. Nemes, P. I., Lekka, M., Fedrizzi, L. & Muresan, L. M. Influence of the electrodeposition current regime on the corrosion resistance of Zn–CeO2 nanocomposite coatings. Surf. Coat. Tech. 252, 102–107 (2014).10.1016/j.surfcoat.2014.04.051 ↗
86. Bahadormanesh, B. & Ghorbani, M. Ni-P/Zn-Ni compositionally modulated multilayer coatings – Part 2: Corrosion and protection mechanisms. Appl. Surf. Sci. 442, 313–321 (2018).10.1016/j.apsusc.2018.02.130 ↗
87. Bae, S. H., Oue, S., Taninouchi, Y. K., Son, I. & Nakano, H. Effect of solution temperature on electrodeposition behavior of Zn–Ni alloy from alkaline zincate solution. ISIJ Int. 62, 1522–1531 (2022).10.2355/isijinternational.ISIJINT-2022-076 ↗
88. Artemenko, V., Khomenko, A. & Maizelis, A. Influence of phase composition of Zn–Ni alloy film on the corrosion resistance of zinc coating. Surf. Eng. Appl. Electro chem. 59, 90–95 (2023).10.3103/S1068375523010027 ↗
89. Sriraman, K. R., Brahimi, S., Szpunar, J. A., Osborne, J. H. & Yue, S. Characterization of corrosion resistance of electrodeposited Zn–Ni Zn and Cd coatings. Electrochim. Acta 105, 314–323 (2013).10.1016/j.electacta.2013.05.010 ↗
90. Khezrloo, A., Derabi, F. E., Tayebi, M., Aghaie, E. & Rajaee, A. Study of 55Al-43.6Zn-1.6Si alloy coating parameters over St37 steel sheet via hot-dipping process and its corrosion behavior. Silicon 10, 2431–2438 (2018).10.1007/s12633-018-9775-6 ↗
91. Jin, K. H. & Oh, M. S. Effects of the Mg content on microstructural and corrosion characteristics of hot-dip Al–Si–Mg alloy-coated steel sheets. Materials 16, 5827 (2023).10.3390/ma16175827 ↗
92. Li, J. P. et al. Dependence of microstructure and mechanical properties on solidification condition of directionally solidified Zn-55Al-1.6Si alloys. China Foundry 21, 685–692 (2024).10.1007/s41230-024-3151-5 ↗
93. Cabral-Miramontes, J. A. et al. Corrosion behavior of Zn-TiO2 and Zn-ZnO electrodeposited coatings in 3.5% NaCl solution. Int. J. Electrochem. Sci. 14, 4226–4239 (2019).10.20964/2019.05.10 ↗
94. Hao, X. et al. Laser hybridizing with micro-milling for fabrication of high aspect ratio micro-groove on oxygen-free copper. Precis. Eng. 70, 15–25 (2021).10.1016/j.precisioneng.2021.01.012 ↗
95. Shetty, A. R. & Hegde, A. C. Effect of square pulse current densities on anticorrosive behavior of Ni–Zn multilayer deposited coatings on mild steel. Chem. Pap. 77, 6919–6931 (2023).10.1007/s11696-023-02986-y ↗
96. Azarsa, E., Cinco, L. & Papini, M. Fabrication of high aspect ratio free-standing structures using abrasive water jet micro-machining. J. Mater. Process. Technol. 275, 116318 (2020).10.1016/j.jmatprotec.2019.116318 ↗
97. Balachandran, R. et al. Effects of ultrasonic field in pulse electrodeposition of NiFe film on Cu substrate. J. Alloy. Compd. 481, 336–339 (2009).10.1016/j.jallcom.2009.02.129 ↗
98. Weng, C., Zhou, M., Jiang, B. & Lv, H. Improvement on replication quality of electroformed nickel mold inserts with micro/nano-structures. Int. Commun. Heat. Mass Transf. 75, 92–99 (2016).10.1016/j.icheatmasstransfer.2016.03.025 ↗
99. Zhu, Z., Li, X., Qu, N. & Zhu, D. A hybrid process for complex-shaped parts electroforming. Int. J. Adv. Manuf. Technol. 81, 779–784 (2015).10.1007/s00170-015-7233-9 ↗
100. Chen, D. & Sun, J. Investigation of ZnCoP coating electrodeposited on Q235B steel and its corrosion resistance in simulated acid rain solution. Int. J. Electrochem. Sci. 18, 100017 (2023).10.1016/j.ijoes.2023.01.017 ↗