Probing degradation of Cobalt-free LiNi0.5Mn1.5O4 ceramic cathode in lithium-ion batteries
Source abstract
Abstract
Abstract High-voltage LiNi 0.5 Mn 1.5 O 4 (LNMO) cathode is a promising option for transition to sustainable and cost-effective cobalt-free cathodes, and ceramic cathodes can substantially increase energy density by enabling higher active material loading. However, there need to better apprehend fundamental aspects about the sintering modification and degradation mechanism of LNMO ceramic based lithium-ion batteries (LIBs). Here, by modulating sintering atmosphere and temperature, we reveal the influence of densification degree and chemical environment on the conductivity of LNMO ceramics. Meticulous post-mortem analyses illustrate that unusual prolongation of the charging curves and rapid capacity fading stem from the lower electrochemical potential of Au (~4.53 V) than the ultra-high operating voltage (~4.7 V) of LNMO, leading to evident dissolution of the Au collector and interface disruptions between cathode and collector. Furthermore, Au could migrate across the cathode and separator, ultimately reach and deposit on anode surface. We also find that O 2 -sintered samples could restrain the initial mixed oxidation state of Mn and oxygen vacancies, which alleviates Mn dissolution, oxygen release, irreversible structural evolution of ceramic cathode, and contributes to enhanced conductivity and electrochemical performance. Our findings reveal the collector dissolution and structural degradation mechanisms of LNMO during cycling, and provide a guideline for the design and synthesis of LNMO ceramic cathodes as well as high-voltage LIBs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Dou, Y. et al. Manganese-based spinel cathodes: a promising frontier for solid-state lithium-ion batteries. Adv. Mater. 38, e14126, https://doi.org/10.1002/adma.202514126 (2026).10.1002/adma.202514126 ↗
2. Shimizu, R. et al. Unraveling the stable cathode electrolyte interface in all solid-state thin-film battery operating at 5 V. Adv. Energy Mater. 12, https://doi.org/10.1002/aenm.202201119 (2022).10.1002/aenm.202201119 ↗
3. Yao, W. et al. A 5 V-class cobalt-free battery cathode with high loading enabled by dry coating. Energy Environ. Sci. 16, 1620–1630 (2023).10.1039/D2EE03840D ↗
4. Zhu, X. et al. High-voltage spinel cathode materials: navigating the structural evolution for lithium-ion batteries. Adv. Mater. 36, e2403482 (2024).10.1002/adma.202403482 ↗
5. Choi, S., Feng, W. & Xia, Y. Recent progress of high voltage spinel LiMn1.5Ni0.5O4 cathode material for lithium-ion battery: surface modification, doping, electrolyte, and oxygen deficiency. ACS Omega 9, 18688–18708 (2024).10.1021/acsomega.3c09101 ↗
6. Lin, Y. et al. Earth-abundant spinel LiMn2O4 cathode for lithium-ion batteries: challenges, strategies, and perspectives. Small Methods 9, 2402233 (2025).10.1002/smtd.202402233 ↗
7. Deng, Y. et al. Identification of the key structure factor to achieve high energy density in spinel LiNi0.5Mn1.5O4. Chem. Mater. 36, 8037–8044 (2024).10.1021/acs.chemmater.4c01969 ↗
8. Hsu, S.-C. et al. Synergistic effect of doping and surface engineering on LiNi0.5Mn1.5O4 and its application as a high-performance cathode material for Li-ion batteries. Ceram. Int. 48, 27859–27869 (2022).10.1016/j.ceramint.2022.06.088 ↗
9. Tian, T. et al. Trace doping of multiple elements enables stable cycling of high areal capacity LiNi0.5 Mn1.5 O4 Cathode. Small 18, e2106898 (2022).10.1002/smll.202106898 ↗
10. Shu, Y. et al. Synergistic effect of surface plane and particle sizes on the electrochemical performance of LiNi0.5Mn1.5O4 cathode material via a facile calcination process. J. Power Sources 433, 226708 (2019).10.1016/j.jpowsour.2019.226708 ↗
11. Wei, L. et al. Surface sulfidization of spinel LiNi0.5Mn1.5O4 cathode material for enhanced electrochemical performance in lithium-ion batteries. Chem. Eng. J. 384, 123268 (2020).10.1016/j.cej.2019.123268 ↗
12. Qureshi, Z. A., Tariq, H. A., Shakoor, R. A., Kahraman, R. & AlQaradawi, S. Impact of coatings on the electrochemical performance of LiNi0.5Mn1.5O4 cathode materials: a focused review. Ceram. Int. 48, 7374–7392 (2022).10.1016/j.ceramint.2021.12.118 ↗
13. Zhu, X. et al. Epitaxial growth of an atom-thin layer on a LiNi0.5Mn1.5O4 cathode for stable Li-ion battery cycling. Nat. Commun. 13, 1565 (2022).10.1038/s41467-022-28963-9 ↗
14. Wang, D. et al. Enhancing reversibility of LiNi0.5Mn1.5O4 by regulating surface oxygen deficiency. Carbon Energy 5, e338 (2023).10.1002/cey2.338 ↗
15. Li, J., Fleetwood, J., Hawley, W. B. & Kays, W. From materials to cell: state-of-the-art and prospective technologies for lithium-ion battery electrode processing. Chem. Rev. 122, 903–956 (2022).10.1021/acs.chemrev.1c00565 ↗
16. Liang, Y. et al. Solvent-free bonding mechanisms and microstructure engineering in dry electrode technology for lithium-ion batteries. Adv. Funct. Mater. e18619 https://doi.org/10.1002/adfm.202518619 (2025).10.1002/adfm.202518619 ↗
17. Kang, J. et al. Toward PFAS-free dry electrode processing: sustainable binder strategies for high-loading electrodes in lithium batteries. Energy Storage Mater. 82, 104662 (2025).10.1016/j.ensm.2025.104662 ↗
18. Kim, K. J. & Rupp, J. L. M. All ceramic cathode composite design and manufacturing towards low interfacial resistance for garnet-based solid-state lithium batteries. Energy Environ. Sci. 13, 4930–4945 (2020).10.1039/D0EE02062A ↗
19. Li, C. et al. Grain boundaries modification of the spinel LiNi0.5Mn1.5O4 ceramic cathode towards low interfacial resistance for lithium-ion batteries with ultrahigh areal energy density. Acta Mater. 292, 121039 (2025).10.1016/j.actamat.2025.121039 ↗
20. Li, M. et al. Dense all-electrochem-active electrodes for all-solid-state lithium batteries. Adv. Mater. 33, e2008723 (2021).10.1002/adma.202008723 ↗
21. Wiemhöfer, H. D., Hauber, T. & Stroetmann, B. Study of fast grain boundary diffusion in mixed conducting compounds by impedance spectroscopy. Defect Diffus. Forum 143-147, 1323–1328 (1997).10.4028/www.scientific.net/DDF.143-147.1323 ↗
22. Bouchet, R., Knauth, P. & Laugier, J. M. Theoretical analysis of IS of polycrystalline materials with blocking or conducting grain boundaries: from microcrystals to nanocrystals. J. Electrochem. Soc. 150, E348 (2003).10.1149/1.1580151 ↗
23. Li, J. et al. Effect of annealing time on properties of spinel LiNi0.5Mn1.5O4 high-voltage lithium-ion battery electrode materials prepared by co-precipitation method. Ionics 23, 2275–2283 (2017).10.1007/s11581-017-2076-z ↗
24. Luo, H. et al. Both interface and Bulk Stable LiNi0.5Mn1.5O4 cathodes for high-energy li-ion batteries. ACS Appl. Energy Mater. 5, 7582–7589 (2022).10.1021/acsaem.2c01039 ↗
25. Hou, X. et al. Specific countermeasures to intrinsic capacity decline issues and future direction of LiMn2O4 cathode. Energy Storage Mater. 57, 577–606 (2023).10.1016/j.ensm.2023.02.015 ↗
26. Hu, E. et al. Utilizing environmental friendly iron as a substitution element in spinel structured cathode materials for safer high energy lithium-ion batteries. Adv. Energy Mater. 6, https://doi.org/10.1002/aenm.201501662 (2015).10.1002/aenm.201501662 ↗
27. Deng, Y.-F., Zhao, S.-X., Zhai, P.-Y., Cao, G. & Nan, C.-W. Impact of lithium excess on the structural and electrochemical properties of the LiNi0.5Mn1.5O4 high-voltage cathode material. J. Mater. Chem. A 3, 20103–20107 (2015).10.1039/C5TA06339F ↗
28. Wang, C. et al. Overlooked electrolyte destabilization by manganese (II) in lithium-ion batteries. Nat. Commun. 10, 3423 (2019).10.1038/s41467-019-11439-8 ↗
29. Chen, K., Shen, Y., Zhang, Y., Lin, Y. & Nan, C.-W. High capacity and cyclic performance in a three-dimensional composite electrode filled with inorganic solid electrolyte. J. Power Sources 249, 306–310 (2014).10.1016/j.jpowsour.2013.10.113 ↗
30. Chen, R.-J. et al. Addressing the interface issues in all-solid-state bulk-type lithium ion battery via an all-composite approach. ACS Appl. Mater. Interfaces 9, 9654–9661 (2017).10.1021/acsami.6b16304 ↗
31. Chen, K. et al. High capacity and rate performance of LiNi0.5Co0.2Mn0.3O2composite cathode for bulk-type all-solid-state lithium battery. J. Mater. Chem. A. 2, 13332–13337 (2014).10.1039/C4TA02395A ↗
32. Wei, Z. et al. Probing the thermal degradation mechanism of polycrystalline and single-crystal Li(Ni0.8Co0.1Mn0.1)O2 cathodes from the perspective of oxygen vacancy diffusion. Energy Storage Mater. 56, 495–505 (2023).10.1016/j.ensm.2023.01.029 ↗
33. Zhang, J.-R. et al. Microstructure evolution and self-discharge degradation mechanism in Li/MnO2 primary batteries. Rare Met. 44, 1392–1400 (2025).10.1007/s12598-024-02945-w ↗