Corrosion of metallic materials fabricated by selective laser melting
Source abstract
Abstract
Abstract Additive manufacturing is an emerging technology that challenges traditional manufacturing methods. However, the corrosion behaviour of additively manufactured parts must be considered if additive techniques are to find widespread application. In this paper, we review relationships between the unique microstructures and the corresponding corrosion behaviour of several metallic alloys fabricated by selective laser melting, one of the most popular powder-bed additive technologies for metals and alloys. Common issues related to corrosion in selective laser melted parts, such as pores, molten pool boundaries, surface roughness and anisotropy, are discussed. Widely printed alloys, including Ti-based, Al-based and Fe-based alloys, are selected to illustrate these relationships, and the corrosion properties of alloys produced by selective laser melting are summarised and compared to their conventionally processed counterparts.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Bourell, D. L. Perspectives on additive manufacturing. Ann. Rev. Mater. Res 46, 1–18 (2016).10.1146/annurev-matsci-070115-031606 ↗
2. Rosen, D. W. A review of synthesis methods for additive manufacturing. Virtu. Phys. Prototyp. 11, 305–317 (2016).10.1080/17452759.2016.1240208 ↗
3. Mallik, M. K., Rao, C. S. & Kesava rao, V. V. S. Effect of heat treatment on hardness of Co-Cr-Mo alloy deposited with laser engineered net shaping. Proced. Eng. 97, 1718–1723 (2014).10.1016/j.proeng.2014.12.323 ↗
4. Hu, Y. B. & Cong, W. L. A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites. Ceram. Int. 44, 20599–20612 (2018).10.1016/j.ceramint.2018.08.083 ↗
5. Fatoba, O. S., Akinlabi, S. A. & Akinlabi, E. T. Laser metal deposition influence on the mechanical properties of steels and stainless steel composites: a review. Mater. Today-Proc. 5, 18603–18620 (2018).10.1016/j.matpr.2018.06.205 ↗
6. Shi, Y. N., Lu, Z., Ren, Y. H. & Yang, G. Microstructure and tensile properties of laser engineered net shaped reduced activation ferritic/martensitic steel. Mater. Charact. 144, 554–562 (2018).10.1016/j.matchar.2018.08.010 ↗
7. Li, Y. Z., Hu, Y. B., Cong, W. L., Zhi, L. & Guo, Z. N. Additive manufacturing of alumina using laser engineered net shaping: Effects of deposition variables. Ceram. Int. 43, 7768–7775 (2017).10.1016/j.ceramint.2017.03.085 ↗
8. Zietala, M. The microstructure, mechanical properties and corrosion resistance of 316 L stainless steel fabricated using laser engineered net shaping. Mat. Sci. Eng. a-Struct. 677, 1–10 (2016).10.1016/j.msea.2016.09.028 ↗
9. Murr, L. E. Fabrication of metal and alloy components by additive manufacturing: examples of 3D materials science. J. Mater. Res Tech. 1, 42–54 (2012).10.1016/S2238-7854(12)70009-1 ↗
10. Murr, L. E. Metal fabrication by additive manufacturing using laser and electron beam melting technologies. J. Mater. Sci. Tech. 28, 1–14 (2012).10.1016/S1005-0302(12)60016-4 ↗
11. Korner, C. Additive manufacturing of metallic components by selective electron beam melting - a review. Int Mater. Rev. 61, 361–377 (2016).10.1080/09506608.2016.1176289 ↗
12. Galati, M. & Iuliano, L. A literature review of powder-based electron beam melting focusing on numerical simulations. Addit. Manuf. 19, 1–20 (2018).10.1016/j.addma.2017.11.001 ↗
13. Singh, S., Sharma, V. S. & Sachdeva, A. Progress in selective laser sintering using metallic powders: a review. Mater. Sci. Tech.-Lond. 32, 760–772 (2016).10.1179/1743284715Y.0000000136 ↗
14. Sing, S. L. et al. Direct selective laser sintering and melting of ceramics: a review. Rapid Prototyp. J. 23, 611–623 (2017).10.1108/RPJ-11-2015-0178 ↗
15. Dinda, G. P., Dasgupta, A. K. & Mazumder, J. Texture control during laser deposition of nickel-based superalloy. Scr. Mater. 67, 503–506 (2012).10.1016/j.scriptamat.2012.06.014 ↗
16. Jia, Q. & Gu, D. Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties. J. Alloy Compd. 585, 713–721 (2014).10.1016/j.jallcom.2013.09.171 ↗
17. Suzuki, M., Yamaguchi, R., Murakami, K. & Nakada, M. Inclusion particle growth during solidification of stainless steel. ISIJ Int. 41, 247–256 (2001).10.2355/isijinternational.41.247 ↗
18. Kong, D. et al. High-throughput fabrication of nickel-based alloys with different Nb contents via a dual-feed additive manufacturing system: Effect of Nb content on microstructural and mechanical properties. J. Alloy Compd. 785, 826–837 (2019).10.1016/j.jallcom.2019.01.263 ↗
19. Van Bael, S. et al. The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds. Acta Biomater. 8, 2824–2834 (2012).10.1016/j.actbio.2012.04.001 ↗
20. Olakanmi, E. O., Cochrane, R. F. & Dalgarno, K. W. A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties. Prog. Mater. Sci. 74, 401–477 (2015).10.1016/j.pmatsci.2015.03.002 ↗
21. Karia, M. C., Popat, M. A. & Sangani, K. B. Selective laser melting of inconel super alloy-a review. AIP Conf. Proc. 1859, 1–7 (2017).10.1063/1.4990166 ↗
22. Zhang, J. L., Song, B., Wei, Q. S., Bourell, D. & Shi, Y. S. A review of selective laser melting of aluminum alloys: processing, microstructure, property and developing trends. J. Mater. Sci. Tech. 35, 270–284 (2019).10.1016/j.jmst.2018.09.004 ↗
23. Morgan, R. H., Papworth, A. J., Sutcliffe, C., Fox, P. & O'Neill, W. High density net shape components by direct laser re-melting of single-phase powders. J. Mater. Sci. 37, 3093–3100 (2002).10.1023/A:1016185606642 ↗
24. Carboni, C., Peyre, P., Beranger, G. & Lemaitre, C. Influence of high power diode laser surface melting on the pitting corrosion resistance of type 316L stainless steel. J. Mater. Sci. 37, 3715–3723 (2002).10.1023/A:1016569527098 ↗
25. Zhang, K. M., Zou, J. X., Grosdidier, T., Dong, C. & Yang, D. Z. Improved pitting corrosion resistance of AISI 316L stainless steel treated by high current pulsed electron beam. Surf. Coat. Tech. 201, 1393–1400 (2006).10.1016/j.surfcoat.2006.02.008 ↗
26. Santo, L. Laser cladding of metals: a review. Int J. Surf. Sci. Eng. 2, 327–336 (2008).10.1504/IJSURFSE.2008.021345 ↗
27. Weng, F., Chen, C. Z. & Yu, H. J. Research status of laser cladding on titanium and its alloys: A review. Mater. Des. 58, 412–425 (2014).10.1016/j.matdes.2014.01.077 ↗
28. Liu, J. L., Yu, H. J., Chen, C. Z., Weng, F. & Dai, J. J. Research and development status of laser cladding on magnesium alloys: A review. Opt. Laser Eng. 93, 195–210 (2017).10.1016/j.optlaseng.2017.02.007 ↗
29. Li, R. D. et al. Selective laser melting of a novel Sc and Zr modified Al-6.2 Mg alloy: Processing, microstructure, and properties. Powder Tech. 319, 117–128 (2017).10.1016/j.powtec.2017.06.050 ↗
30. Das, S., Bourell, D. L. & Babu, S. S. Metallic materials for 3D printing. MRS Bull. 41, 729–741 (2016).10.1557/mrs.2016.217 ↗
31. Zlobina, I. V., Bekrenev, N. V. & Pavlov, S. P. A proposal to improve a 3D printing technology of composite materials products. IOP Conf. Ser.: Mater. Sci. Eng. 286, 012017 (2017).10.1088/1757-899X/286/1/012017 ↗
32. Zhu, Y., Chen, X., Zou, J. & Yang, H. Sliding wear of selective laser melting processed Ti6Al4V under boundary lubrication conditions. Wear 368-369, 485–495 (2016).10.1016/j.wear.2016.09.020 ↗
33. Zhu, Y., Zou, J. & Yang, H. -y Wear performance of metal parts fabricated by selective laser melting: a literature review. J. Zhejiang Univ.-Sci. A 19, 95–110 (2018).10.1631/jzus.A1700328 ↗
34. Shipley, H. et al. Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: A review. Int J. Mach. Tool. Man. 128, 1–20 (2018).10.1016/j.ijmachtools.2018.01.003 ↗
35. DebRoy, T. et al. Additive manufacturing of metallic components-Process, structure and properties. Prog. Mater. Sci. 92, 112–224 (2018).10.1016/j.pmatsci.2017.10.001 ↗
36. Kong, D. et al. Bio-functional and anti-corrosive 3D printing 316L stainless steel fabricated by selective laser melting. Mater. Des. 152, 88–101 (2018).10.1016/j.matdes.2018.04.058 ↗
37. Man, C. et al. The enhancement of microstructure on the passive and pitting behaviors of selective laser melting 316L SS in simulated body fluid. Appl Surf. Sci. 467-468, 193–205 (2019).10.1016/j.apsusc.2018.10.150 ↗
38. Li, R., Liu, J., Shi, Y., Wang, L. & Jiang, W. Balling behavior of stainless steel and nickel powder during selective laser melting process. Int. J. Adv. Manufact. Tech. 59, 1025–1035 (2011).10.1007/s00170-011-3566-1 ↗
39. Martin, J. H. et al. 3D printing of high-strength aluminium alloys. Nature 549, 365 (2017).10.1038/nature23894 ↗
40. Sanviemvongsak, T., Monceau, D. & Macquaire, B. High temperature oxidation of IN 718 manufactured by laser beam melting and electron beam melting: Effect of surface topography. Corros. Sci. 141, 127–145 (2018).10.1016/j.corsci.2018.07.005 ↗
41. Lu, L. -X., Sridhar, N. & Zhang, Y. -W. Phase field simulation of powder bed-based additive manufacturing. Acta Mater. 144, 801–809 (2018).10.1016/j.actamat.2017.11.033 ↗
42. Lewandowski, J. J. & Seifi, M. Metal Additive manufacturing: a review of mechanical properties. Annu. Rev. Mater. Res 46, 151–186 (2016).10.1146/annurev-matsci-070115-032024 ↗
43. Frazier, W. E. Metal additive manufacturing: a review. J. Mater. Eng. Perform. 23, 1917–1928 (2014).10.1007/s11665-014-0958-z ↗
44. Townsend, A., Senin, N., Blunt, L., Leach, R. K. & Taylor, J. S. Surface texture metrology for metal additive manufacturing: a review. Precis Eng. 46, 34–47 (2016).10.1016/j.precisioneng.2016.06.001 ↗
45. Domashenkov, A. et al. Microstructure and physical properties of a Ni/Fe-based superalloy processed by Selective Laser Melting. Addit. Manuf. 15, 66–77 (2017).10.1016/j.addma.2017.03.008 ↗
46. Gorsse, S., Hutchinson, C., Goune, M. & Banerjee, R. Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys. Sci. Technol. Adv. Mater. 18, 584–610 (2017).10.1080/14686996.2017.1361305 ↗
47. Strossner, J., Terock, M. & Glatzel, U. Mechanical and microstructural investigation of nickel-based superalloy IN718 manufactured by selective laser melting (SLM). Adv. Eng. Mater. 17, 1099–1105 (2015).10.1002/adem.201500158 ↗
48. Yap, C. Y., Tan, H. K., Du, Z. L., Chua, C. K. & Dong, Z. L. Selective laser melting of nickel powder. Rapid Prototyp. J. 23, 750–757 (2017).10.1108/RPJ-01-2016-0006 ↗
49. Qiu, C. L., Chen, H. X., Liu, Q., Yue, S. & Wang, H. M. On the solidification behaviour and cracking origin of a nickel-based superalloy during selective laser melting. Mater. Charact. 148, 330–344 (2019).10.1016/j.matchar.2018.12.032 ↗
50. Saeidi, K., Gao, X., Zhong, Y. & Shen, Z. J. Hardened austenite steel with columnar sub-grain structure formed by laser melting. Mat. Sci. Eng. a-Struct. 625, 221–229 (2015).10.1016/j.msea.2014.12.018 ↗
51. Li, R. D. et al. Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical property. J. Alloy Compd. 746, 125–134 (2018).10.1016/j.jallcom.2018.02.298 ↗
52. Luo, S. C. et al. Selective laser melting of an equiatomic AlCrCuFeNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical behavior. J. Alloy Compd. 771, 387–397 (2019).10.1016/j.jallcom.2018.08.290 ↗
53. Wen, S. F. et al. Effect of molten pool boundaries on the mechanical properties of selective laser melting parts. J. Mater. Process Tech. 214, 2660–2667 (2014).10.1016/j.jmatprotec.2013.09.019 ↗
54. Ganesh, P. et al. Studies on pitting corrosion and sensitization in laser rapid manufactured specimens of type 316L stainless steel. Mater. Des. 39, 509–521 (2012).10.1016/j.matdes.2012.03.011 ↗
55. Miranda, G. et al. Predictive models for physical and mechanical properties of 316L stainless steel produced by selective laser melting. Mat. Sci. Eng. a-Struct. 657, 43–56 (2016).10.1016/j.msea.2016.01.028 ↗
56. Xie, F. X., He, X. B., Cao, S. L. & Qu, X. H. Structural and mechanical characteristics of porous 316L stainless steel fabricated by indirect selective laser sintering. J. Mater. Process Tech. 213, 838–843 (2013).10.1016/j.jmatprotec.2012.12.014 ↗
57. Ni, X. et al. Corrosion behavior of 316L stainless steel fabricated by selective laser melting under different scanning speeds. J. Mater. Eng. Perform. 27, 3667–3677 (2018).10.1007/s11665-018-3446-z ↗
58. Dai, N. A. W. et al. Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes. Corros. Sci. 111, 703–710 (2016).10.1016/j.corsci.2016.06.009 ↗
59. Yang, G. Q. et al. Additive manufactured bipolar plate for high-efficiency hydrogen production in proton exchange membrane electrolyzer cells. Int J. Hydrog. Energ. 42, 14734–14740 (2017).10.1016/j.ijhydene.2017.04.100 ↗
60. Sander, G. et al. Corrosion of additively manufactured alloys: a review. Corrosion 74, 1318–1350 (2018).10.5006/2926 ↗
61. Kong, D. et al. Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes. J. Mater. Sci. Tech. 35, 1499–1507 (2019).10.1016/j.jmst.2019.03.003 ↗
62. Ornek, C. Additive manufacturing - a general corrosion perspective. Corros. Eng. Sci. Techn 53, 531–535 (2018).10.1080/1478422X.2018.1511327 ↗
63. Hou, B. et al. The cost of corrosion in China. NPJ Mater. Degrad. 1, 1–10 (2017).10.1038/s41529-017-0005-2 ↗
64. Li, X. et al. Materials science: Share corrosion data. Nature 527, 441–442 (2015).10.1038/527441a ↗
65. Otero, E. et al. Influence of microstructure on the corrosion resistance of AISI type 304L and type 316L sintered stainless steels exposed to ferric chloride solution. Mater. Charact. 35, 145–151 (1995).10.1016/1044-5803(95)00099-2 ↗
66. Otero, E. et al. Corrosion behaviour of aisi 304l and 316l stainless steels prepared by powder metallurgy in the presence of sulphuric and phosphoric acid. Corros. Sci. 40, 1421–1434 (1998).10.1016/S0010-938X(98)00047-X ↗
67. Maximenko, A. L. & Olevsky, E. A. Pore filling during selective laser melting-assisted additive manufacturing of composites. Scr. Mater. 149, 75–78 (2018).10.1016/j.scriptamat.2018.02.015 ↗
68. Laquai, R. et al. X-ray refraction distinguishes unprocessed powder from empty pores in selective laser melting Ti-6Al-4V. Mater. Res. Lett. 6, 130–135 (2018).10.1080/21663831.2017.1409288 ↗
69. Sander, G. et al. On the corrosion and metastable pitting characteristics of 316L stainless steel produced by selective laser melting. J. Electrochem. Soc. 164, C250–C257 (2017).10.1149/2.0551706jes ↗
70. Kempen, K., Thijs, L., Van Humbeeck, J. & Kruth, J. P. Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation. Mater. Sci. Tech.-Lond. 31, 917–923 (2015).10.1179/1743284714Y.0000000702 ↗
71. Carter, L. N., Essa, K. & Attallah, M. M. Optimisation of selective laser melting for a high temperature Ni-superalloy. Rapid Prototyp. J. 21, 423–432 (2015).10.1108/RPJ-06-2013-0063 ↗
72. Yusuf, S. M. & Gao, N. Influence of energy density on metallurgy and properties in metal additive manufacturing. Mater. Sci. Tech.-Lond. 33, 1269–1289 (2017).10.1080/02670836.2017.1289444 ↗
73. Kluczynski, J., Sniezek, L., Grzelak, K. & Mierzynski, J. The influence of exposure energy density on porosity and microhardness of the SLM additive manufactured elements. Materials 11, 1–10 (2018).10.3390/ma11112304 ↗
74. Han, J. et al. Microstructure and mechanical property of selective laser melted Ti6Al4V dependence on laser energy density. Rapid Prototyp. J. 23, 217–226 (2017).10.1108/RPJ-12-2015-0193 ↗
75. Cherry, J. A. et al. Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting. Int J. Adv. Manuf. Tech. 76, 869–879 (2015).10.1007/s00170-014-6297-2 ↗
76. Wei, K., Gao, M., Wang, Z. & Zeng, X. Effect of energy input on formability, microstructure and mechanical properties of selective laser melted AZ91D magnesium alloy. Mater. Sci. Eng. A 611, 212–222 (2014).10.1016/j.msea.2014.05.092 ↗
77. Zhu, Z. G. et al. Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting. Scr. Mater. 154, 20–24 (2018).10.1016/j.scriptamat.2018.05.015 ↗
78. Wang, X. J., Zhang, L. C., Fang, M. H. & Sercombe, T. B. The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy. Mater. Sci. Eng. A 597, 370–375 (2014).10.1016/j.msea.2014.01.012 ↗
79. Prashanth, K. G., Scudino, S., Maity, T., Das, J. & Eckert, J. Is the energy density a reliable parameter for materials synthesis by selective laser melting? Mater. Res. Lett. 5, 386–390 (2017).10.1080/21663831.2017.1299808 ↗
80. Geenen, K., Röttger, A. & Theisen, W. Corrosion behavior of 316L austenitic steel processed by selective laser melting, hot-isostatic pressing, and casting. Mater. Corros. 68, 764–775 (2017).10.1002/maco.201609210 ↗
81. Schaller, R. F., Taylor, J. M., Rodelas, J. & Schindelholz, E. J. Corrosion properties of powder bed fusion additively manufactured 17-4 PH stainless steel. Corrosion 73, 796–807 (2017).10.5006/2365 ↗
82. Kong, D. et al. Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells. Electro. Acta 276, 293–303 (2018).10.1016/j.electacta.2018.04.188 ↗
83. Mohd Yusuf, S., Nie, M., Chen, Y., Yang, S. & Gao, N. Microstructure and corrosion performance of 316L stainless steel fabricated by Selective Laser Melting and processed through high-pressure torsion. J. Alloy Compd. 763, 360–375 (2018).10.1016/j.jallcom.2018.05.284 ↗
84. Li, Y. J., Li, X. P., Zhang, L. C. & Sercombe, T. B. Processing and properties of topologically optimised biomedical Ti-24Nb-4Zr-8Sn scaffolds manufactured by selective laser melting. Mat. Sci. Eng. a-Struct. 642, 268–278 (2015).10.1016/j.msea.2015.06.088 ↗
85. Liu, Y. J. et al. Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting. Acta Mater. 113, 56–67 (2016).10.1016/j.actamat.2016.04.029 ↗
86. Cabrini, M. et al. Statistical approach for electrochemical evaluation of the effect of heat treatments on the corrosion resistance of AlSi10Mg alloy by laser powder bed fusion. Electro. Acta 305, 459–466 (2019).10.1016/j.electacta.2019.03.103 ↗
87. Xing, X. D., Duan, X. M., Jiang, T. T., Wang, J. D. & Jiang, F. C. Ultrasonic peening treatment used to improve stress corrosion resistance of AlSi10Mg components fabricated using selective laser melting. Metals-Basel 9, 1–8 (2019).10.3390/met9010103 ↗
88. Lancea, C. et al. Accelerated corrosion analysis of AlSi10Mg alloy manufactured by selective laser melting (SLM). Rev. Chim.-Buchar. 69, 975–981 (2018).10.37358/RC.18.4.6240 ↗
89. Liang, Z. X. et al. A new high-strength and corrosion-resistant Al-Si based casting alloy. Mater. Lett. 97, 104–107 (2013).10.1016/j.matlet.2013.01.112 ↗
90. Fratila-Apachitei, L. E., Apachitei, I. & Duszczyk, J. Characterization of cast AlSi(Cu) alloys by scanning Kelvin probe force microscopy. Electro. Acta 51, 5892–5896 (2006).10.1016/j.electacta.2006.03.027 ↗
91. Osorio, W. R., Goulart, P. R. & Garcia, A. Effect of silicon content on microstructure and electrochemical behavior of hypoeutectic Al-Si alloys. Mater. Lett. 62, 365–369 (2008).10.1016/j.matlet.2007.05.051 ↗
92. Ni, X. et al. Anisotropy in mechanical property and corrosion resistance of 316L stainless steel fabricated by selective laser melting. Int. J. Min. Met. Mater, 26, 319–328 (2018).10.1007/s12613-019-1740-x ↗
93. Chen, W. Effect of the particle size of 316L stainless steel on the corrosion characteristics of the steel fabricated by selective laser melting. Int. J. Electrochem. Sc., 13, 10217–10232, (2018).10.20964/2018.11.11 ↗
94. Wang, D., Liu, Y., Yang, Y. & Xiao, D. Theoretical and experimental study on surface roughness of 316L stainless steel metal parts obtained through selective laser melting. Rapid Prototyp. J. 22, 706–716 (2016).10.1108/RPJ-06-2015-0078 ↗
95. Boschetto, A., Bottini, L. & Veniali, F. Roughness modeling of AlSi10Mg parts fabricated by selective laser melting. J. Mater. Process Tech. 241, 154–163 (2017).10.1016/j.jmatprotec.2016.11.013 ↗
96. Tian, Y., Tomus, D., Rometsch, P. & Wu, X. H. Influences of processing parameters on surface roughness of Hastelloy X produced by selective laser melting. Addit. Manuf. 13, 103–112 (2017).10.1016/j.addma.2016.10.010 ↗
97. Chen, H. Y., Gu, D. D., Xiong, J. P. & Xia, M. J. Improving additive manufacturing processability of hard-to-process overhanging structure by selective laser melting. J. Mater. Process Tech. 250, 99–108 (2017).10.1016/j.jmatprotec.2017.06.044 ↗
98. Strano, G., Hao, L., Everson, R. M. & Evans, K. E. Surface roughness analysis in selective laser melting. In Proc. Innovative Developments on Virtual and Physical Prototyping (ed. Bartolo, P. J.) 561–565, (CRC, Boca Raton, 2012).10.1201/b11341-90 ↗
99. Strano, G., Hao, L., Everson, R. M. & Evans, K. E. Surface roughness analysis, modelling and prediction in selective laser melting. J. Mater. Process Tech. 213, 589–597 (2013).10.1016/j.jmatprotec.2012.11.011 ↗
100. Qiu, C. L. et al. On the role of melt flow into the surface structure and porosity development during selective laser melting. Acta Mater. 96, 72–79 (2015).10.1016/j.actamat.2015.06.004 ↗