journal article·2022-06-29Open access

Electrochemical characterization and degradation of carbon fibre reinforced polymer in quiescent near neutral chloride media

Stanley Udochukwu Ofoegbu, Marcela C. Quevedo, A. C. Bastos, M. G. S. Ferreira, M. L. Zheludkevich

npj Materials Degradation· Volume 6· Issue 1

Abstract

Abstract In a quest for a better understanding of the mechanism and contribution(s) of fresh (“un-degraded”) and degraded CFRP surfaces to galvanic corrosion of coupled metals in multi-material assemblies the electrochemical behaviour of CFRP in quiescent 50 mM NaCl was studied using electrochemical techniques. Tests using ferricyanide/ferrocyanide redox couple revealed a quasi-reversible behaviour. Under cathodic polarization, CFRP is active electrochemically evidenced by the increase in pH (to pH ≥ 10). Galvanic current densities and potentials for Al-CFRP couple comprised of freshly polished CFRP sample ranged from 15–25 µA cm−2 and ≈−660 to −850 mVSCE respectively, while the corresponding parameter for Al-CFRP couple comprised of degraded CFRP were in the range 10–25 µA cm−2 and ≈−670 to −900 mVSCE. Contrary to expectations, CFRP prior exposure to degradative high pH media before galvanic coupling did not result in an increase in the intensity of galvanic corrosion of the coupled metal.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Conducting polymers and applications · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Miller Jr, B. A. The galvanic corrosion of graphite epoxy composite materials coupled with alloys (No. GAE/MC/75D-8). https://apps.dtic.mil/dtic/tr/fulltext/u2/a019322.pdf (1975).
2. Mandel, M. & Krüger, L. Electrochemical corrosion studies and pitting corrosion sensitivity of a self‐pierce rivet joint of carbon fibre reinforced polymer (CFRP)–laminate and EN AW‐6060‐T6. Mater. Werkst. 43, 302–309 (2012).10.1002/mawe.201200945 ↗
3. Ofoegbu, S.U. Corrosion and Corrosion Inhibition in Multi-material Combinations. PhD Thesis, University of Aveiro, Portugal. (2018).
4. Tavakkolizadeh, M. & Saadatmanesh, H. Galvanic corrosion of carbon and steel in aggressive environments. J. Compos. Constr. 5, 200–210 (2001).10.1061/(ASCE)1090-0268(2001)5:3(200) ↗
5. Tucker, W. C., Brown, R. & Russell, L. Corrosion between a graphite/polymer composite and metals. J. Compos. Mater. 24, 92–102 (1990).10.1177/002199839002400105 ↗
6. Miriyala, S., Tucker, W., Rockett, T. & Brown, R. Degradation of carbon reinforced polymer composites under galvanic coupling conditions. In 33rd Structures, Structural Dynamics and Materials Conference. (1992).10.2514/6.1992-2553 ↗
7. Kaushik, D., Alias, M. N. & Brown, R. An impedance study of a carbon fiber/vinyl ester composite. Corrosion 47, 859–867 (1991).10.5006/1.3585198 ↗
8. Sloan, F. E. & Talbot, J. B. Corrosion of graphite-fiber-reinforced composites I-galvanic coupling damage. Corrosion 48, 830–838 (1992).10.5006/1.3315882 ↗
9. Alias, M. N. & Brown, R. Damage to composites from electrochemical processes. Corrosion 48, 373–378 (1992).10.5006/1.3315947 ↗
10. Woo, E. M., Chen, J. S. & Carter, C. S. Mechanisms of degradation of polymer composites by galvanic reactions between metals and carbon fiber. Polym. Compos. 14, 395–401 (1993).10.1002/pc.750140505 ↗
11. Sloan, F. E. & Talbot, J. B. Corrosion of graphite-fiber-reinforced composites II-anodic polarization damage. Corrosion 48, 1020–1026 (1992).10.5006/1.3315904 ↗
12. Shapoval, G. S., Pud, A. A., Zamotayev, P. V. & Kachan, A. A. Degradation of some carbon-chain polymers by electrochemical reduction. Poly. Sci. 27, 2427–2431 (1985).
13. Tucker, W. C. Degradation of graphite/polymer composites in seawater. J. Energy Resour. Technol. 113, 264–267 (1991).10.1115/1.2905910 ↗
14. Tucker, W. C., Brown, R., Rockett, T. J., & Miriyala, S. K. Blistering of graphite/polymer composites galvanically coupled with metals in sea water. https://apps.dtic.mil/sti/pdfs/ADA257247.pdf (1992).
15. Alias, M. N. & Brown, R. Corrosion behavior of carbon fiber composites in the marine environment. Corros. Sci. 35, 395–402 (1993).10.1016/0010-938X(93)90172-D ↗
16. Tang, Y., Hartt, W., Granata, R., Yu, H. & Farooq, M. U. Degradation of carbon/vinyl ester composites under cathodic polarization in seawater. J. Compos. Mater. 46, 3115–3120 (2012).10.1177/0021998312436989 ↗
17. Bauer, A., Grundmeier, G., Steger, H. & Weitl, J. Corrosive delamination processes of CFRP‐aluminum alloy hybrid components. Werkst. Korros. 69, 98–105 (2018).10.1002/maco.201709637 ↗
18. Kinoshita K. & Chu X. Carbon for supercapacitors, in Proc. Symp. on Electrochemical Capacitors, (The Electrochemical Society, 1996),
19. Kinoshita, K. Carbon: Electrochemical and Physicochemical Properties (Wiley, 1988).
20. Frackowiak, E. & Beguin, F. Carbon materials for the electrochemical storage of energy in capacitors. Carbon 39, 937–950 (2001).10.1016/S0008-6223(00)00183-4 ↗
21. Brownson, D. A., Munro, L. J., Kampouris, D. K. & Banks, C. E. Electrochemistry of graphene: not such a beneficial electrode material? RSC Adv. 1, 978–988 (2011).10.1039/c1ra00393c ↗
22. Brownson, D. A., Kampouris, D. K. & Banks, C. E. Graphene electrochemistry: fundamental concepts through to prominent applications. Chem. Soc. Rev. 41, 6944–6976 (2012).10.1039/c2cs35105f ↗
23. Yuan, W. et al. The edge-and basal-plane-specific electrochemistry of a single-layer graphene sheet. Sci. Rep. 3, 2248 (2013).10.1038/srep02248 ↗
24. Randin, J. P. & Yeager, E. Differential capacitance study of stress‐annealed pyrolytic graphite electrodes. J. Electrochem. Soc. 118, 711–714 (1971).10.1149/1.2408151 ↗
25. Brug, G. J., Van Den Eeden, A. L. G., Sluyters-Rehbach, M. & Sluyters, J. H. The analysis of electrode impedances complicated by the presence of a constant phase element. J. Electroanal. Chem. Interfacial Electrochem. 176, 275–295 (1984).10.1016/S0022-0728(84)80324-1 ↗
26. Elgrishi, N. et al. A practical beginner’s guide to cyclic voltammetry. Chem. Educ. 95, 197–206 (2018).10.1021/acs.jchemed.7b00361 ↗
27. Hood, S. J. et al. Why ‘the bigger the better’is not always the case when utilising microelectrode arrays: high density vs. low density arrays for the electroanalytical sensing of chromium (VI). Analyst 134, 2301–2305 (2009).10.1039/b911507b ↗
28. Zhu, F., Mao, B. & Yan, J. Double electrode systems with microelectrode arrays for electrochemical measurements. Rev. Anal. Chem. 34, 87–101 (2015).10.1515/revac-2015-0012 ↗
29. Davies, T. J. & Compton, R. G. The cyclic and linear sweep voltammetry of regular and random arrays of microdisc electrodes: theory. J. Electroanal. Chem. 585, 63–82 (2005).10.1016/j.jelechem.2005.07.022 ↗
30. Davies, T. J. et al. The cyclic and linear sweep voltammetry of regular arrays of microdisc electrodes: fitting of experimental data. J. Electroanal. Chem. 585, 51–62 (2005).10.1016/j.jelechem.2005.07.021 ↗
31. Chen, R., Li, Y., Huo, K. & Chu, P. K. Microelectrode arrays based on carbon nanomaterials: emerging electrochemical sensors for biological and environmental applications. RSC Adv. 3, 18698–18715 (2013).10.1039/c3ra43033b ↗
32. Stulík, K., Amatore, C., Holub, K., Marecek, V. & Kutner, W. Microelectrodes. Definitions, characterization, and applications (Technical report). Pure Appl. Chem. 72, 1483–1492 (2000).10.1351/pac200072081483 ↗
33. Patel, P. R. et al. Chronic in vivo stability assessment of carbon fiber microelectrode arrays. J. Neural Eng. 13, 066002 (2016).10.1088/1741-2560/13/6/066002 ↗
34. Huang, X. J., O'Mahony, A. M. & Compton, R. G. Microelectrode arrays for electrochemistry: approaches to fabrication. Small 5, 776–788 (2009).10.1002/smll.200801593 ↗
35. Gardner, R. D., Zhou, A. & Zufelt, N. A. Development of a microelectrode array sensing platform for combination electrochemical and spectrochemical aqueous ion testing. Sens. Actuators B Chem. 136, 177–185 (2009).10.1016/j.snb.2008.10.031 ↗
36. Ino, K., Shiku, H. & Matsue, T. Bioelectrochemical applications of microelectrode arrays in cell analysis and engineering. Curr. Opin. Electrochem. 5, 146–151 (2017).10.1016/j.coelec.2017.08.004 ↗
37. Jin, Y. et al. Fabrication of surface renewable carbon microelectrode arrays and their application in heavy metal ion sensing. Anal. Methods 11, 1284–1288 (2019).10.1039/C9AY00043G ↗
38. Lin, Z. et al. An addressable microelectrode array for electrochemical detection. Anal. Chem. 80, 6830–6833 (2008).10.1021/ac801389d ↗
39. Kim, R., Joo, S., Jung, H., Hong, N. & Nam, Y. Recent trends in microelectrode array technology for in vitro neural interface platform. Biomed. Eng. Lett. 4, 129–141 (2014).10.1007/s13534-014-0130-6 ↗
40. Liu, Y., Li, X., Chen, J. & Yuan, C. Micro/nano electrode array sensors: advances in fabrication and emerging applications in bioanalysis. Front. Chem. 8, 573865 (2020).10.3389/fchem.2020.573865 ↗
41. Yang, H., Rahman, M. T., Du, D., Panat, R. & Lin, Y. 3-D printed adjustable microelectrode arrays for electrochemical sensing and biosensing. Sens. Actuators B Chem. 230, 600–606 (2016).10.1016/j.snb.2016.02.113 ↗
42. Stett, A. et al. Biological application of microelectrode arrays in drug discovery and basic research. Anal. Bioanal. Chem. 377, 486–495 (2003).10.1007/s00216-003-2149-x ↗
43. Xu, L. et al. Trends and recent development of the microelectrode arrays (MEAs). Biosens. Bioelectron. 179, 112854 (2021).10.1016/j.bios.2021.113047 ↗
44. Taylor, R. J. & Humffray, A. A. Electrochemical studies on glassy carbon electrodes. J. Electroanal. Chem. Interfacial Electrochem. 64, 63–84 (1975).10.1016/S0022-0728(75)80278-6 ↗
45. Šljukić, B., Banks, C. E., Mentus, S. & Compton, R. G. Modification of carbon electrodes for oxygen reduction and hydrogen peroxide formation: the search for stable and efficient sonoelectrocatalysts. Phys. Chem. Chem. Phys. 6, 992–997 (2004).10.1039/B316412H ↗
46. Šljukić, B., Banks, C. E. & Compton, R. G. An overview of the electrochemical reduction of oxygen at carbon-based modified electrodes. J. Iran. Chem. Soc. 2, 1–25 (2005).10.1007/BF03245775 ↗
47. Lin, C. J., Du, R. G. & Nguyen, T. In-situ imaging of chloride ions at the metal/solution interface by scanning combination microelectrodes. Corrosion 56, 41–47 (2000).10.5006/1.3280521 ↗
48. Denuault, G., Frank, M. T. & Peter, L. M. Scanning electrochemical microscopy: potentiometric probing of ion fluxes. Faraday Discuss. 94, 23–35 (1992).10.1039/fd9929400023 ↗
49. Bastos, A. in Handbook of Sol-Gel Science and Technology 2nd edn. (Klein, L., Aparicio, M. & Jitianu, A. eds) pp. 1–57 (Springer International Publishing AG, 2017).
50. Kiss, A., Filotás, D., Souto, R. M. & Nagy, G. The effect of electric field on potentiometric scanning electrochemical microscopic imaging. Electrochem. Commun. 77, 138–141 (2017).10.1016/j.elecom.2017.03.011 ↗
51. Ofoegbu, S. U., Ferreira, M. G. & Zheludkevich, M. L. Galvanically stimulated degradation of carbon-fiber reinforced polymer composites: a critical review. Materials 12, 651 (2019).10.3390/ma12040651 ↗
52. Bard, A. J. & Faulkner, L. R. Electrochemical Methods Fundamentals and Applications 1st edn. (Wiley, 1980).
53. Granger, M. C. & Swain, G. M. The influence of surface interactions on the reversibility of Ferri/Ferrocyanide at boron‐doped diamond thin‐film electrodes. J. Electrochem. Soc. 146, 4551–4558 (1999).10.1149/1.1392673 ↗
54. Pharr, C. M. & Griffiths, P. R. Infrared spectroelectrochemical analysis of adsorbed hexacyanoferrate species formed during potential cycling in the ferrocyanide/ferricyanide redox couple. Anal. Chem. 69, 4673–4679 (1997).10.1021/ac961120l ↗
55. Zhang, J., Yin, Q., Cai, S. & Fujishima, A. In situ fourier transform infrared reflection spectroscopic studies of ferricyanide/ferrocyanide on graphite electrode. Electroanalysis 5, 517–520 (1993).10.1002/elan.1140050522 ↗
56. Chen, P. & McCreery, R. L. Control of electron transfer kinetics at glassy carbon electrodes by specific surface modification. Anal. Chem. 68, 3958–3965 (1996).10.1021/ac960492r ↗
57. Kamoshida, N. et al. In situ ATR-IR study of Fe(CN)63−/Fe CN)64− redox system on boron-doped diamond electrode. Diam.Relat. Mater. 93, 50–53 (2019).10.1016/j.diamond.2019.01.021 ↗
58. Vivian, J. E. & King, C. J. Diffusivities of slightly soluble gases in water. AIChE J. 10, 220–221 (1964).10.1002/aic.690100217 ↗
59. St‐Denis, C. E. & Fell, C. J. D. Diffusivity of oxygen in water. Can. J. Chem. Eng. 49, 885–885 (1971).10.1002/cjce.5450490632 ↗
60. Tse, F. C. & Sandall, O. C. Diffusion coefficients for oxygen and carbon dioxide in water at 25 °C by unsteady state desorption from a quiescent liquid. Chem. Eng. Commun. 3, 147–153 (1979).10.1080/00986447908935860 ↗
61. Gerasimov, V. V. & Rozenfeld, I. L. Effect of temperature on the diffusion current and the thickness of the diffusion layer. Russ. Chem. Bull. 5, 797–801 (1956).10.1007/BF01169982 ↗
62. Ofoegbu, S. U. et al. Modification of carbon fibre reinforced polymer (CFRP) surface with sodium dodecyl sulphate for mitigation of cathodic activity. Appl. Surf. Sci. 478, 924–936 (2019).10.1016/j.apsusc.2019.02.024 ↗
63. Palani, S., Hack, T., Deconinck, J. & Lohner, H. Validation of predictive model for galvanic corrosion under thin electrolyte layers: an application to aluminium 2024-CFRP material combination. Corros. Sci. 78, 89–100 (2014).10.1016/j.corsci.2013.09.003 ↗
64. Dolgikh, O., Bastos, A. C., Oliveira, A., Dan, C. & Deconinck, J. Influence of the electrolyte film thickness and NaCl concentration on the oxygen reduction current on platinum. Corros. Sci. 102, 338–347 (2016).10.1016/j.corsci.2015.10.025 ↗
65. Liu, C., Srinivasan, J. & Kelly, R. G. Electrolyte film thickness effects on the cathodic current availability in a galvanic couple. J. Electrochem. Soc. 164, C845–C855 (2017).10.1149/2.1641713jes ↗
66. Bouali, A. C. et al. Evaporation of electrolyte during SVET measurements: the scale of the problem and the solutions. Electroanalysis 31, 2290–2298 (2019).10.1002/elan.201900435 ↗
67. Modulor GmbH. Pultruded carbon fibre (CRP) rod, round https://www.modulor.de/en/pultruded-carbon-fibre-crp-rod-round.html (2016).
68. Bastos, A. C., Karavai, O. V., Zheludkevich, M. L., Yasakau, K. A. & Ferreira, M. G. S. Localised measurements of pH and dissolved oxygen as complements to SVET in the investigation of corrosion at defects in coated aluminum alloy. Electroanalysis 22, 2009–2016 (2010).10.1002/elan.201000076 ↗