Classification and spatial mapping of atmospheric corrosion of China
Source abstract
Abstract
Abstract Atmospheric corrosion is ubiquitous in China but varies a lot among different regions covering the cold, temperate, and tropical zones. Categorizing the atmospheric corrosivity and plotting precise atmospheric corrosion map remain key interest for a variety of industries. The present work proposed an atmospheric corrosion map of China for hot-dip galvanized steels, which was constructed by inverse distance weighting (IDW) interpolation algorithm based on both the measured corrosion rates of coupons exposed at 2393 inland test stations and calculated corrosion rates from a prevalent dose-response function in 2918 sites in coastal regions. When the corrosion category was used as the criterion, the IDW interpolation algorithm of power 2 performed best. Cross-validation results confirmed that the prediction accuracy of IDW interpolation reached 85.6%. Based on the corrosion map, the categories of atmospheric corrosivity in China could be determined.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Koushik, B. G., Steen, N. V., Mamme, M. H., Ingelgem, Y. V. & Terryn, H. Review on modelling of corrosion under droplet electrolyte for predicting atmospheric corrosion rate. J. Mater. Sci. Technol. 62, 254–267 (2021).10.1016/j.jmst.2020.04.061 ↗
2. Roberge, P. R., Klassen, R. D. & Haberecht, P. W. Atmospheric corrosivity modeling — a review. Mater. Des. 23, 321–330 (2002).10.1016/S0261-3069(01)00051-6 ↗
3. Lebozec, N., Jönsson, M. & Thierry, D. Atmospheric corrosion of magnesium alloys: influence of temperature, relative humidity, and chloride deposition. Corrosion 60, 356–361 (2004).10.5006/1.3287743 ↗
4. Hou, B. R. et al. The cost of corrosion in China. npj Mater. Degrad. 1, 1–10 (2017).10.1038/s41529-017-0005-2 ↗
5. Kumar, V., Sharma, N., Tiwari, S. K. & Kango, S. Atmospheric corrosion of materials and their effects on mechanical properties: a brief review. Mater. Today 44, 4677–4681 (2021).
6. Zhi, Y. J., Yang, T. & Fu, D. M. An improved deep forest model for forecast the outdoor atmospheric corrosion rate of low-alloy steels. J. Mater. Sci. Technol. 49, 202–210 (2020).10.1016/j.jmst.2020.01.044 ↗
7. Slamova, K. & Koehl, M. Measurement and GIS-based spatial modelling of copper corrosion in different environments in Europe. Mater. Corros. 68, 20–29 (2017).10.1002/maco.201608957 ↗
8. Reiss, D., Rihm, B., Thöni, C. & Faller, M. Mapping stock at risk and release of zinc and copper in Switzerland-dose response functions for runoff rates derived from corrosion rate data. Water Air Soil Poll. 159, 101–113 (2004).10.1023/B:WATE.0000049163.18416.ec ↗
9. Sica, Y. C., Kenny, E. D., Portella, K. F., & Campos Filho, D.F. Atmospheric corrosion performance of carbon steel, galvanized steel, aluminum and copper in the north Brazilian coast. J. Braz. Chem. Soc. 18, 153–166 (2007).10.1590/S0103-50532007000100017 ↗
10. Chico, B., Fuente, D., Vega, J. M. & Morcillo, M. Corrosivity maps of Spain for zinc in rural atmospheres. Rev. Metal. 46, 485–492 (2010).10.3989/revmetalmadrid.1035 ↗
11. Kim, Y. S., Lim, H. K., Kim, J. J. & Park, Y. S. Corrosivity of atmospheres in the Korean peninsula. Corros. Sci. Technol. 10, 109–117 (2011).
12. Ivaskova, M., Kotes, P. & Brodnan, M. Air pollution as an important factor in construction materials deterioration in Slovak Republic. Proc. Eng. 108, 131–138 (2015).10.1016/j.proeng.2015.06.128 ↗
13. Pongsaksawad, W., Klomjit, P., Khamsuk, P., Sorachot, S. & Pålsson, N. S. Chloride distribution model and corrosion map of structural steels for tropical climate in Thailand. Sci. Total Environ. 787, 147465 (2021).10.1016/j.scitotenv.2021.147465 ↗
14. Ganther, W. D. et al. Towards the development of a corrosion map for Abu Dhabi. Mater. Corros. 62, 1066–1073 (2011).10.1002/maco.201005816 ↗
15. Karaca, F. Mapping the corrosion impact of air pollution on the historical peninsula of Istanbul. J. Cult. Herit. 14, 129–137 (2013).10.1016/j.culher.2012.04.011 ↗
16. Cole, I., Corrigan, P. & Hue, N. V. Steel corrosion map of Vietnam. Corros. Sci. Technol. 11, 103–107 (2012).10.14773/cst.2012.11.4.103 ↗
17. Wu, D. Q. et al. Prediction of polycarbonate degradation in natural atmospheric environment of China based on BP-ANN model with screened environmental factors. Chem. Eng. J. 399, 125878 (2020).10.1016/j.cej.2020.125878 ↗
18. Wang, Z. Y., Chen, H. C., Yu, G. C. & Han, W. Investigation on atmospheric corrosiveness in hainan province. J. Iron Steel Res. Int. 10, 59–62 (2003).
19. Fan, Z. B., Li, X. G., Jiang, B., Wang, X. M. & Wang, Q. Mapping atmospheric corrosivity in Shandong. Water Air Soil Pollut. 231, 569 (2020).10.1007/s11270-020-04939-7 ↗
20. Huang, J. C., Meng, X. B., Zheng, Z. J. & Gao, Y. Optimization of the atmospheric corrosivity mapping of Guangdong Province. Mater. Corros. 70, 91–101 (2019).10.1002/maco.201810306 ↗
21. Kim, Y. S., Lim, H. K., Kim, J. J., Hwang, W. S. & Park, Y. S. Corrosion cost and corrosion map of Korea – based on the data from 2005 to 2010. Corros. Sci. Technol. 10, 52–59 (2011).
22. Vera, R., Puentes, M., Araya, R., Rojas, P. & Carvajal, A. Atmospheric corrosion map of Chile: results after one year of exposure. Rev. Constr. 11, 61–72 (2012).
23. Kumar, V. & Sil, A. Rubric assessment and spatial zonal mapping of atmospheric corrosion of steel in India. Corrosion 77, 795–808 (2021).10.5006/3787 ↗
24. Tidblad, J. et al. UN ECE ICP Materials: dose-response functions on dry and wet acid deposition effects after 8 years of exposure. Water Air Soil Poll. 130, 1457–1462 (2001).10.1023/A:1013965030909 ↗
25. Castañeda, A. A., Corvo, F., Fernández, D. & Valdés, C. Outdoor-indoor atmospheric corrosion in a coastal wind farm located in a tropical island. Eng. J. 21, 43–62 (2017).10.4186/ej.2017.21.2.43 ↗
26. Benarie, M. & Lipfert, F. L. A general corrosion function in terms of atmospheric pollutant concentrations and rain pH. Atmos. Environ. 20, 1947–1958 (1986).10.1016/0004-6981(86)90336-7 ↗
27. Panchenko, Y. M. et al. Comparative estimation of long-term predictions of corrosion losses for carbon steel and zinc using various models for the Russian territory. Corros. Eng. Sci. Technol. 52, 149–157 (2017).10.1080/1478422X.2016.1227024 ↗
28. Zhi, Y. J. et al. Improving atmospheric corrosion prediction through key environmental factor identification by random forest-based model. Corros. Sci. 178, 109084 (2021).10.1016/j.corsci.2020.109084 ↗
29. Mikhailov, A. A. Estimating and mapping the material corrosion losses in the European part of Russia with unified doze—response functions. Prot. Met 38, 281–296 (2002).10.1023/A:1015617405346 ↗
30. ISO 9223. Corrosion of metals and alloys − Corrosivity of atmospheres − Classification, determination and estimation (2012).
31. Kucera, V. et al. UN/ECE ICP materials dose-response functions for the multi-pollutant situation. Water Air Soil Poll. 7, 249–258 (2007).10.1007/s11267-006-9080-z ↗
32. Castillo-Miranda, J. O. & Rodriguez-Gomez, F. J. Mapping of the cost of atmospheric corrosion of zinc and galvanised steel due to the effect of atmospheric pollution in the Mexico City Metropolitan area. Corros. Eng. Sci. Technol. 57, 408–419 (2022).10.1080/1478422X.2022.2074115 ↗
33. Omran, E. S. E. Improving the prediction accuracy of soil mapping through geostatistics. Int J. Geosci. 3, 574–590 (2012).10.4236/ijg.2012.33058 ↗
34. Kambezidis, H. D. & Kalliampakos, G. Mapping atmospheric corrosion on modern materials in the Greater Athens area. Water Air Soil Poll. 224, 1463 (2013).10.1007/s11270-013-1463-y ↗
35. Guan, H., Love, A. J., Simmons, C. T., Makhnin, O. & Kayaalp, A. S. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping. Hydrol. Earth Syst. Sc. 14, 801–813 (2010).10.5194/hess-14-801-2010 ↗
36. Cole, I. S., Paterson, D. A. & Ganther, W. D. Holistic model for atmospheric corrosion Part 1 –Theoretical framework for production, transportation and deposition of marine salts. Corros. Eng. Sci. Technol. 38, 129–134 (2003).10.1179/147842203767789203 ↗
37. Cole, I. S. et al. Holistic model for atmospheric corrosion Part 2 – Experimental measurement of deposition of marine salts in a number of long range studies. Corros. Eng. Sci. Technol. 38, 259–266 (2003).10.1179/147842203225008886 ↗
38. Chen, H., Cui, H. Y., He, Z. B., Lu, L. & Huang, Y. H. Influence of chloride deposition rate on rust layer protectiveness and corrosion severity of mild steel in tropical coastal atmosphere. Mater. Chem. Phys. 259, 123971 (2021).10.1016/j.matchemphys.2020.123971 ↗
39. ISO 9226. Corrosion Of Metals And Alloys − Corrosivity Of Atmospheres − Determination Of Corrosion Rate Of Standard Specimens For The Evaluation Of Corrosivity (2012).
40. Hai, C. et al. Analysis of corrosion evolution in carbon steel in the subtropical atmospheric environment of sichuan. J. Mater. Eng. Perform. 30, 8014–8022 (2021).10.1007/s11665-021-06019-1 ↗
41. ISO 9225. Corrosion Of Metals And Alloys − Corrosivity Of Atmospheres − Determination Of Corrosion Rate Of Standard Specimens For The Evaluation Of Corrosivity (2012).
42. Lu, G. Y. & Wong, D. W. An adaptive inverse-distance weighting spatial interpolation technique. Comput Geosci.-UK 34, 1044–1055 (2008).10.1016/j.cageo.2007.07.010 ↗
43. Shukla, K., Kumar, P., Mann, G. S. & Khare, M. Mapping spatial distribution of particulate matter using Kriging and Inverse Distance Weighting at supersites of megacity Delhi. Sustain Cities Soc. 54, 101997 (2020).10.1016/j.scs.2019.101997 ↗
44. Denby, B. et al. Spatial mapping of ozone and SO2 trends in Europe. Sci. Total Environ. 408, 4795–4806 (2010).10.1016/j.scitotenv.2010.06.021 ↗