Defect interactions with the microstructure in multi-principal element alloys and the role of phase separation and precipitation
Source abstract
Abstract
Defects in materials form, interact, and evolve at the atomic level. The measurements and analysis of their atomic level generation and evolution can reveal the mechanisms of defect interactions which dictate the macroscopic material properties and strength. Here we investigate atomic scale defects in multi-principal element alloys (MPEAs) of four and five elements. We combine positron annihilation spectroscopy (PAS) with a rigorous analysis of the phases, microstructures, and chemical compositions by x-ray diffraction (XRD), scanning transmission electron microscopy (STEM) and energy dispersive X-ray (EDX). PAS reveals an interesting phenomenon in which ion irradiation induced defects substantially reduce the size of the original vacancy clusters in alloys of specific chemical compositions. The study shows the strong impact of the nature of chemical disorder on atomic scale defect interactions and evolution during growth and irradiation. Replacing one element or changing its percentage modifies the phase and segregation and strongly impact defect formation. Depletion of Ni from the matrix enhances defect formation and clustering and hinders the alloy radiation tolerance while the formation of dendric structure reduces point defect formation and improves radiation resistance. This study manifests the complexity of the interaction between the chemical arrangement of atoms and defect migration and evolution in MPEAs and demonstrates that defect interactions are driven by phase nature, phase separation and segregation of elements.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fusion materials and technologies · Muon and positron interactions and applications · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Yeh, K. W., Chen, S.-K., Lin, S.-J., Gan, J.-Y., Chin, T.-S., Shun, T.-T., Tsau, C.-H. & Chang, S.-Y. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv. Eng. Mater. 6, 299–303 (2004). no. 5.10.1002/adem.200300567 ↗
2. Cantor, B., Chang, I. T. H., Knight, P. eter & Vincent, A. J. B. Microstructural development in equiatomic multicomponent alloys. Mater. Sci. Eng. A 375, 213–218 (2004).10.1016/j.msea.2003.10.257 ↗
3. George, E. P., Raabe, D. & Ritchie, R. O. High-entropy alloys. Nat. Rev. Mater. 4, 515–534 (2019).10.1038/s41578-019-0121-4 ↗
4. Ye, Y. F., Wang, Q. ing, Lu, J. iatian, Liu, C. T. & Yang, Y. ancong High-entropy alloy: challenges and prospects. Mater. Today 19, 349–362 (2016).10.1016/j.mattod.2015.11.026 ↗
5. Tsai, M. ing-H. ung & Yeh, J. ien-W. ei High-entropy alloys: a critical review. Mater. Res. Lett. 2, 107–123 (2014). no. 3.10.1080/21663831.2014.912690 ↗
6. M. C. Gao, Jien-Wei Yeh, Peter K. Liaw, and Yong Zhang. High-entropy Alloys (Springer International Publishing, 2016).10.1007/978-3-319-27013-5 ↗
7. Miracle, D. B. & Senkov, O. legN. A critical review of high entropy alloys and related concepts. Acta Mater. 122, 448–511 (2017).10.1016/j.actamat.2016.08.081 ↗
8. Dolique, V., Thomann, A.-L., Brault, P. ascal, Tessier, Y. ves & Gillon, P. ascale Complex structure/composition relationship in thin films of AlCoCrCuFeNi high entropy alloy. Mater. Chem. Phys. 117, 142–147 (2009). no. 1.10.1016/j.matchemphys.2009.05.025 ↗
9. Tung, C. hung-C. hin. et al. On the elemental effect of AlCoCrCuFeNi high-entropy alloy system. Mater. Lett. 61, 1–5 (2007). no. 1.10.1016/j.matlet.2006.03.140 ↗
10. Arfaoui, M., Radnóczi, G. yörgy & Kovács Kis, V. iktória Transformations in CrFeCoNiCu high entropy alloy thin films during in-situ annealing in TEM. Coatings 10, 60 (2020). no. 1.10.3390/coatings10010060 ↗
11. Feng, X. B. et al. Effects of nanotwins on the mechanical properties of AlxCoCrFeNi high entropy alloy thin films. Scr. Mater. 139, 71–76 (2017).10.1016/j.scriptamat.2017.06.009 ↗
12. Dolique, V., Thomann, A.-L., Brault, P. ascal, Tessier, Y. & Gillon, P. ascale Thermal stability of AlCoCrCuFeNi high entropy alloy thin films studied by in-situ XRD analysis. Surf. Coat. Technol. 204, 1989–1992 (2010). no. 12-13.10.1016/j.surfcoat.2009.12.006 ↗
13. Li, X. iaopeng Additive manufacturing of advanced multi-component alloys: bulk metallic glasses and high entropy alloys. Adv. Eng. Mater. 20, 1700874 (2018). no. 5.10.1002/adem.201700874 ↗
14. Parkin, C. alvin. et al. Phase stability, mechanical properties, and ion irradiation effects in face-centered cubic CrFeMnNi compositionally complex solid-solution alloys at high temperatures. J. Nucl. Mater. 565, 153733 (2022).10.1016/j.jnucmat.2022.153733 ↗
15. Daramola, A. yobami. et al. Development of a plasticity-oriented interatomic potential for CrFeMnNi high entropy alloys. Comput. Mater. Sci. 203, 111165 (2022).10.1016/j.commatsci.2021.111165 ↗
16. Gigax, J. G. et al. Micro-and mesoscale mechanical properties of an ultra-fine grained CrFeMnNi high entropy alloy produced by large strain machining. Scr. Mater. 178, 508–512 (2020).10.1016/j.scriptamat.2019.11.042 ↗
17. Zhang, L. J. et al. The microstructure and mechanical properties of novel Al-Cr-Fe-Mn-Ni high-entropy alloys with trimodal distributions of coherent B2 precipitates. Mater. Sci. Eng.: A 757, 160–171 (2019).10.1016/j.msea.2019.04.104 ↗
18. Agarwal, S. et al. A new mechanism for void-cascade interaction from nondestructive depth-resolved atomic-scale measurements of ion irradiation–induced defects in Fe. Sci. Adv. 6, eaba8437 (2020).10.1126/sciadv.aba8437 ↗
19. Agarwal, S. et al. The mechanism behind the high radiation tolerance of Fe–Cr alloys. J. Appl. Phys. 131, 125903 (2022).10.1063/5.0085086 ↗
20. Masemola, K. humo, Popoola, P. atricia & Malatji, N. icholus The effect of annealing temperature on the microstructure, mechanical and electrochemical properties of arc-melted AlCrFeMnNi equi-atomic High entropy alloy. J. Mater. Res. Technol. 9, 5241–5251 (2020). no. 3.10.1016/j.jmrt.2020.03.050 ↗
21. Munitza, A., Salhova, S., Guttmanna, G., Derimow, N. & Nahmanya, M. Heat treatment influence on the microstructure and mechanical properties of AlCrFeNiTi0.5 high entropy alloys. Mater. Sci. Eng. A 742, 1–14 (2019).10.1016/j.msea.2018.10.114 ↗
22. Elkatatny, S. et al. Effect of Al content and cold rolling on the microstructure and mechanical properties of Al5Cr12Fe35Mn28Ni20 high-entropy alloy. Mater. Sci. Eng. A 759, 380–90 (2019).10.1016/j.msea.2019.05.056 ↗
23. Chen, M. ing et al. The tribological properties of Al0. 6CoCrFeNi high-entropy alloy with the σ phase precipitation at elevated temperature. J. Alloy. Compd. 777, 180–189 (2019).10.1016/j.jallcom.2018.10.393 ↗
24. Malatji, N., Lengopeng, T., Pityana, S. & Popoola, A. P. I. Microstructural, mechanical and electrochemical properties of AlCrFeCuNiWx high entropy alloys. J. Mater. Res. Technol. 11, 1594–1603 (2021).10.1016/j.jmrt.2021.01.103 ↗
25. Jinhong, P., Pan Ye, Z. hang, Hui & Lu, Z. hang Microstructure and properties of AlCrFeCuNix (0.6≤ x≤ 1.4) high-entropy alloys. Mater. Sci. Eng. A 534, 228–233 (2012).10.1016/j.msea.2011.11.063 ↗
26. Sistla, H. R., Newkirk, J. W. & Liou, F. F. Effect of Al/Ni ratio, heat treatment on phase transformations and microstructure of AlxFeCoCrNi2− x (x= 0.3, 1) high entropy alloys. Mater. Des. 81, 113–121 (2015).10.1016/j.matdes.2015.05.027 ↗
27. Li, M., Gazquez, J., Borisevich, A., Mishra, K. R. & Katharine, M. F. Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method. Intermetallics 95, 110–118 (2018).10.1016/j.intermet.2018.01.021 ↗
28. Selim, F. A. Positron annihilation spectroscopy of defects in nuclear and irradiated materials-a review. Mater. Charact. 174, 110952 (2021).10.1016/j.matchar.2021.110952 ↗
29. Schultz, P. J. & Lynn, K. G. Interaction of positron beams with surfaces, thin films, and interfaces. Rev. Mod. Phys. 60, 701 (1988).10.1103/RevModPhys.60.701 ↗
30. Winarski, D. J. et al. Induced conductivity in sol-gel ZnO films by passivation or elimination of Zn vacancies. AIP Adv. 6, 095004 (2016). no. 9.10.1063/1.4962658 ↗
31. Saadatkia, P. et al. Point and extended defects in heteroepitaxial β− G a 2 O 3 films. Phys. Rev. Mater. 4, 104602 (2020). no. 10.10.1103/PhysRevMaterials.4.104602 ↗
32. Horodek, P. & Skuratov, V. A. Variable energy positron beam studies of defects in heavy ion implanted palladium. Surf. Coat. Technol. 296, 65–68 (2016).10.1016/j.surfcoat.2016.04.009 ↗
33. Hyosim. Kim. et al. Interface effect of Fe and Fe2O3 on the distributions of ion induced defects. J. Appl. Phys. 132, 10 (2022).10.1063/5.0095013 ↗
34. Zhang, L. E. et al. Defects and solarization in YAG transparent ceramics. Photonics Res. 7, 549–557 (2019). no. 5.10.1364/PRJ.7.000549 ↗
35. Selim, F. A. et al. Generation and characterization of point defects in SrTiO3 and Y3Al5O12. Results Phys. 5, 28 (2015).10.1016/j.rinp.2015.01.002 ↗
36. Wagner, A., Butterling, M., Liedke, M. O., Potzger, K. & Krause-Rehberg, R. Positron annihilation lifetime and Doppler broadening spectroscopy at the ELBE facility,. AIP Conf. Proc. 1970, 040003 (2018).10.1063/1.5040215 ↗
37. Egger, W., Sperr, P., Kögel, G. & Dollinger, G. Pulsed low energy positron system (PLEPS) at the Munich research reactor FRM II. Phys. Status Solidi C 4, 3969–3972 (2007).10.1002/pssc.200675812 ↗
38. Hugenschmidt, C. Positron beam experiments at NEPOMUC. Nucl. Phys. N. 28, 28–31 (2018).10.1080/10619127.2018.1463022 ↗
39. Selim, F. A., Wells, D. P., Harmon, J. F. & Williams, J. High depth nondestructive stress measurements on thick steel alloys. J. Appl. Phys. 97, 113540 (2005).10.1063/1.1925770 ↗
40. Husband, P., Bartošová, I., Slugeň, V. & Selim, F. A. Positron annihilation in transparent ceramics. J. Phys.: Conf. Ser. 674, 012013 (2016).
41. Selim, F. aridaA. Positron Annihilation Spectroscopy Applied to Materials Science and Engineering. Solid State Phenom. 373, 99–114 (2025).10.4028/p-Z0mol1 ↗
42. Weber, M. H., Selim, F. A., Solodovnikov, D. & Lynn, K. G. Defect engineering of ZnO. Appl. Surf. Sci. 255, 68–70 (2008).10.1016/j.apsusc.2008.05.170 ↗
43. Haseman, M. et al. Neutron irradiation induced defects in oxides and their impact on the oxide properties. J. Appl. Phys. 129, 215901 (2021).10.1063/5.0046292 ↗
44. Hirschmann, E. et al. A new system for real-time data acquisition and pulse parameterization for digital positron annihilation lifetime spectrometers with high repetition rates. J. Instrum. 16, P08001 (2021).10.1088/1748-0221/16/08/P08001 ↗
45. Olsen, J. V., Kirkegaard, P., Pedersen, N. J. & Eldrup, M. PALSfit: A new program for the evaluation of positron lifetime spectra. Phys. status solidi 4, 4004–4006 (2007).10.1002/pssc.200675868 ↗
46. Ma, Z. et al. Controlling magneto-ionics by defect engineering through light ion implantation. Adv. Funct. Mater. 2312827, 1–14 (2024).
47. Selim, F. A. et al. New positron annihilation spectroscopy techniques for thick materials. Radiat. Phys. Chem. 68, 427–430 (2003).10.1016/S0969-806X(03)00249-4 ↗
48. Selim, F. A., Wells, D. P., Harmon, J. F. & Williams, J. Development of accelerator-based γ-ray-induced positron annihilation spectroscopy technique. J. Appl. Phys. 97, 113539 (2005).10.1063/1.1925769 ↗
49. Selim, F. A. et al. Doppler broadening measurements of positron annihilation using bremsstrahlung radiation. Nucl. Instrum. Methods Phys. Res. Sect. B Beam Interact. Mater. At. 192, 197–201 (2002). no. 1-2.10.1016/S0168-583X(02)00868-6 ↗