Fracture analysis under modes I and II of adhesive joints on CFRP in saline environment
Source abstract
Abstract
This study analyzes the delamination behavior of adhesive joints after exposure to a saline environment for zero, one, and twelve weeks. Delamination was assessed under static and fatigue loading conditions in fracture Modes I and II, with a detailed analysis of fracture surfaces using Scanning Electron Microscopy (SEM) and Backscattered Electron (BSE) detection. The 3D images reveal significant morphological differences in fracture surfaces, showing variations in fatigue lines and the presence of impurities depending on the fracture mode. A probabilistic fatigue life analysis was performed using a Weibull regression model, showing notable changes, especially in Mode I at a high number of cycles. A chemical analysis using EDX and FTIR-ATR complemented the mechanical study, revealing an increase in sodium and chlorine concentrations with prolonged saline exposure. Oxidative degradation was also observed, with carbonyl groups increasing significantly over time, particularly in areas most exposed to the saline mist.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Huang, S., Fu, Q., Yan, L. & Kasal, B. Characterization of interfacial properties between fibre and polymer matrix in composite materials – A critical review. J. Mater. Res. Technol. 13, 1441–1484 (2021).10.1016/j.jmrt.2021.05.076 ↗
2. Budzik, M. K. et al. Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview. Taylor Francis Ltd 14, 2133–2209 (2022).
3. Adams, R. D. & Singh, M. M. Low temperature transitions in fibre reinforced polymers, 2001. [Online]. Available: www.elsevier.com/locate/compositesa10.1016/S1359-835X(00)00185-8 ↗
4. Beylergil, B. & Duman, V. Enhancing Mode-I and Mode-II fracture toughness of carbon fiber/epoxy laminated composites using 3D-printed polyamide interlayers. Proc. Inst. Mech. Eng., Part L: J. Mater.: Des. Appl. 238, 578–591 (2024).
5. Gulino, M., Moroni, F. & Pirondi, A. Metal-metal and metal-composite joints with 3D printed aluminium substrates: effect of surface treatment on the mode I fracture toughness. J. Adhes. 105, 1–29 (2023).10.1080/00218464.2023.2285074 ↗
6. Stelzer, S. et al. Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Results from ESIS TC4 round-robins. Eng. Fract. Mech. 116, 92–107 (2014).10.1016/j.engfracmech.2013.12.002 ↗
7. Sekiguchi, Y. & Sato, C. Experimental investigation of the effects of adhesive thickness on the fracture behaviour of structural acrylic adhesive joints under various loading rates. Int J. Adhes. Adhes. 105, 102782 (2021).10.1016/j.ijadhadh.2020.102782 ↗
8. Wacker, J. D., Tittmann, K., Koch, I., Laveuve, D. & Gude, M. Fatigue life analysis of carbon fiber reinforced polymer (CFRP) components in hybrid adhesive joints. Materwiss Werksttech 52, 1230–1247 (2021).10.1002/mawe.202100046 ↗
9. Budhe, S., Banea, M. D., de Barros, S. & da Silva, L. F. M. An updated review of adhesively bonded joints in composite materials. Int J. Adhes. Adhes. 72, 30–42 (2017).10.1016/j.ijadhadh.2016.10.010 ↗
10. Kaiser, I., Zhang, C. & Tan, K. T. Mechanical behaviour and failure mechanisms of CFRP and Titanium tubular adhesive lap joints at extreme temperaturas. Compos Struct. 290, 115528 (2022).10.1016/j.compstruct.2022.115528 ↗
11. Shang, X. et al. Fracture mechanism of adhesive single-lap joints with composite adherends under quasi-static tensión. Compos Struct. 251, 112639 (2020).10.1016/j.compstruct.2020.112639 ↗
12. Castro Sousa, F. et al. Experimental study on the influence of environmental conditions on the fatigue behaviour of adhesive joints. Int J Fatigue. 175, 107752 (2023).10.1016/j.ijfatigue.2023.107752 ↗
13. Takeda, T. Mode I fracture toughness determination and environmental durability evaluation of adhesive bonds by wedge test. Int. J. Adhes Adhes 127, 103521 (2023).10.1016/j.ijadhadh.2023.103521 ↗
14. May, M. Measuring the rate-dependent mode I fracture toughness of composites – A review. Compos Part A Appl Sci. Manuf. 81, 1–12 (2016).10.1016/j.compositesa.2015.10.033 ↗
15. May, M., Channammagari, H. & Hahn, P. High-rate mode II fracture toughness testing of polymer matrix composites – A review. Compos Part A Appl Sci. Manuf. 137, 106019 (2020).10.1016/j.compositesa.2020.106019 ↗
16. R. D. S. G. Campilho and L. F. M. da Silva. Mode I fatigue and fracture behaviour of adhesively-bonded carbon fibre-reinforced polymer (CFRP) composite joints. Fatigue and Fracture of Adhesively-Bonded Composite Joints, Elsevier Inc. 93–120 (2015).10.1016/B978-0-85709-806-1.00004-5 ↗
17. Shamchi, S. P., de Moura, M. F. S. F., Zhao, Z., Yi, X. & Moreira, P. M. G. P. Dynamic mode II interlaminar fracture toughness of electrically modified carbon/epoxy composites. Int J. Impact Eng. 159, 104030 (2022).10.1016/j.ijimpeng.2021.104030 ↗
18. Zabala, H., Aretxabaleta, L., Castillo, G. & Aurrekoetxea, J. Dynamic 4 ENF test for a strain rate dependent mode II interlaminar fracture toughness characterization of unidirectional carbon fibre epoxy composites. Polym. Test. 55, 212–218 (2016).10.1016/j.polymertesting.2016.09.001 ↗
19. de Moura, M. F. S. F. & de Morais, A. B. Equivalent crack based analyses of ENF and ELS tests. Eng. Fract. Mech. 75, 2584–2596 (2008).10.1016/j.engfracmech.2007.03.005 ↗
20. Pérez-Galmés, M., Renart, J., Sarrado, C., Rodríguez-Bellido, A. & Costa, J. A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test. Compos Part A Appl. Sci. Manuf. 90, 670–677 (2016).10.1016/j.compositesa.2016.08.020 ↗
21. Santos, D. et al. Load-control vs. displacement-control strategy in fatigue threshold analysis of adhesives: Effects of temperatura. Eng. Fract. Mech. 284, 109255 (2023).10.1016/j.engfracmech.2023.109255 ↗
22. Viana, G., Costa, M., Banea, M. D. & Da Silva, L. F. M. A review on the temperature and moisture degradation of adhesive joints. Proc. Inst. Mech. Eng. Pt. L J. Mater. Des. Appl. 231, 488–501 (2017).
23. Fernandes, R. L., de Moura, M. F. S. F. & Moreira, R. D. F. Effect of temperature on pure modes I and II fracture behaviour of composite bonded joints. Compos B Eng. 96, 35–44 (2016).10.1016/j.compositesb.2016.04.022 ↗
24. Argüelles, A., Viña, J., Canteli, A. F., Coronado, P. & Mollón, V. Influence of temperature on the delamination process under mode I fracture and dynamic loading of two carbon–epoxy composites. Compos B Eng. 68, 207–214 (2015).10.1016/j.compositesb.2014.08.051 ↗
25. Abdel-Monsef, S., Renart, J., Carreras, L., Turon, A. & Maimí, P. Effect of environment conditioning on mode II fracture behaviour of adhesively bonded joints. Theor. Appl. Fract. Mech. 112, 102912 (2021).10.1016/j.tafmec.2021.102912 ↗
26. Meng, J. et al. Mode I fracture toughness with fiber bridging of unidirectional composite laminates under cryogenic temperatura. Compos Sci. Technol. 246, 110386 (2024).10.1016/j.compscitech.2023.110386 ↗
27. Insausti, N., Adarraga, I., De Gracia, J., Arrese, A. & Mujika, F. Numerical assessment of an experimental procedure applied to DCB tests. Polym. Test. 82, 106288 (2020).10.1016/j.polymertesting.2019.106288 ↗
28. Arrese, A., Mujika, F., Renart, J. & Sarrado, C. Analysis of displacement path dependence in mixed mode cohesive law. Eng. Fract. Mech. 276, 108879 (2022).10.1016/j.engfracmech.2022.108879 ↗
29. Machado, J. J. M., Marques, E. A. S., Campilho, R. D. S. G. & da Silva, L. F. M. Mode II fracture toughness of CFRP as a function of temperature and strain rate. Compos B Eng. 114, 311–318 (2017).10.1016/j.compositesb.2017.02.013 ↗
30. Floros, I. S., Tserpes, K. I. & Löbel, T. Mode-I, mode-II and mixed-mode I+II fracture behaviour of composite bonded joints: Experimental characterization and numerical simulation. Compos B Eng. 78, 459–468 (2015).10.1016/j.compositesb.2015.04.006 ↗
31. Kumar, A. & Sain, T. Phase field-based cohesive zone approach to model delamination in fiber-reinforced polymer composites. Compos Struct. 329, 117751 (2024).10.1016/j.compstruct.2023.117751 ↗
32. Chen, Y. et al. A comprehensive experimental investigation of the rate-dependent interlaminar delamination behaviour of CFRP composites. Compos B Eng. 261, 110788 (2023).10.1016/j.compositesb.2023.110788 ↗
33. Yan, X. et al. Mode-II fracture toughness and crack propagation of pultruded carbon Fiber-Epoxy composites. Eng. Fract. Mech. 279, 109042 (2023).10.1016/j.engfracmech.2022.109042 ↗
34. Orell, O., Jokinen, J. & Kanerva, M. Use of DIC in the characterisation of mode II crack propagation in adhesive fatigue testing. Int J. Adhes. Adhes. 122, 103332 (2023).10.1016/j.ijadhadh.2023.103332 ↗
35. Li, C., Viswanathan-Chettiar, S., Sun, F. Shi, Z. & Blackman, B. Effect of CFRP surface topography on the adhesion and strength of composite-composite and composite-metal joints. Compos. Part A Appl. Sci. Manuf. 164, 107275 (2023).10.1016/j.compositesa.2022.107275 ↗
36. Kotrotsos, A., Geitona, A. & Kostopoulos, V. On the mode I and mode II fatigue delamination growth of CFRPs modified by electrospun Bis-maleimide resin. Compos Sci. Technol. 237, 110000 (2023).10.1016/j.compscitech.2023.110000 ↗
37. Mohsin, M. A. A., Iannucci, L. & Greenhalgh, E. S. Delamination of Novel Carbon Fibre-Based Non-Crimp Fabric-Reinforced Thermoplastic Composites in Mode I: Experimental and Fractographic Analysis. Polym. (Basel) 15, 7 (2023).
38. Ocaña López, R. Universidad Politécnica De Madrid Escuela Técnica Superior De Ingeniería Y Diseño Industrial, 2017.
39. Bayazid, S. M., Brodusch, N. & Gauvin, R. Investigation of the Effect of Magnification, Accelerating Voltage, and Working Distance on the 3D Digital Reconstruction Techniques. Scanning. 2020, 743267 (2020).10.1155/2020/3743267 ↗
40. Wang, B. et al. Effects of Hygrothermal and Salt Mist Ageing on the Properties of Epoxy Resins and Their Composites. Polymers (Basel). 15, 725 (2023).10.3390/polym15030725 ↗
41. Bhullar, K. A. et al. Advanced spectroscopy, microscopy, diffraction and thermal analysis of polyamide adhesives and prediction of their functional properties with solid-state NMR spectroscopy. Polym. Chem. 12, 10 (2021).10.1039/D0PY01348J ↗
42. Gorassini, A., Adami, G., Calvini, P. & Giacomello, A. ATR-FTIR characterization of old pressure sensitive adhesive tapes in historic papers. J. Cult. Herit. 21, 775–785 (2016).10.1016/j.culher.2016.03.005 ↗
43. George Socrates, Infrared and Raman Characteristic Group Frequencies, 2004.
44. ASTM, ASTM D3039M-17. Standard test method for tensile properties of polymer matrix composite materials., American Society for Testing and Materials, 2017.
45. Argüelles, A., Viña, I., Vigón, P. & Viña, J. Study of the fatigue delamination behaviour of adhesive joints in carbon fibre reinforced epoxy composites, influence of the period of exposure to saline environment. Sci. Rep. 12, 19789 (2022).10.1038/s41598-022-23378-4 ↗
46. Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites 1. [Online]. Available: www.astm.org,
47. ASTM, ASTM D7905/D7905M-14: Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer, American Society for Testing and Materials, 2014, https://doi.org/10.1520/D7905.10.1520/D7905 ↗
48. Mignot, C. Color (and 3D) for Scanning Electron Microscopy. Micros Today 26, 12–17 (2018).10.1017/S1551929518000482 ↗