Microstructure and Corrosion Behaviors of High-Strength and High-Elasticity Cu-20Ni-20Mn-xGa Alloys
Source abstract
Abstract
Cu-20Ni-20Mn-xGa (x = 1, 5 wt.%) alloys with high strength and elasticity were prepared and tested for corrosion properties in 3.5 wt.% NaCl solution. The hardness, tensile strength, elongation, and annual corrosion rate of the Cu-20Ni-20Mn-1 Ga alloy reached 1368 MPa, 442 HV, 8.63%, and 0.0262 mm/year, respectively, while those of Cu-20Ni-20Mn-5 Ga alloy were 1278 MPa, 428 HV, 2.5%, and 0.0119 mm/year, respectively. The excellent mechanical properties were attributed to the nanoscale NiMn phase which can strengthen the copper matrix. In addition to grain refinement, the addition of Ga also reduced the cathodic current. Also, the corrosion products of the two alloys in 3.5 wt.% NaCl solution were mainly oxides and chlorides. The Cu-20Ni-20Mn-5 Ga showed better corrosion resistance with more gallium-rich oxides in the corrosion product film to resist corrosion.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. S.H. Lo, W.M. Gibbon, and R.S. Hollingshead, JMatS 22, 3293 (1987).
2. L. Chen, D. Fu, and M. Chen, JMatS 55, 13398 (2020).
3. S. Nourbakhsh, and J. Nutting, JMatS 14, 2642 (1979).
4. J.L. Liu, X.M. Huang, G.H. Li, G.M. Cai, H.S. Liu, and Z.P. Jin, JMatS 53, 7809 (2018).
5. J. Lemus-Ruiz, L. Ceja-Cárdenas, J.A. Verduzco, and O. Flores, JMatS 43, 6296 (2008).
6. K.L. Lv, Z.Y. Xie, H.S. Liu, G.M. Cai, and Z.P. Jin, JMatS 50, 7238 (2015).
7. S. Hu, L. Liu, Y. Cui, Y. Li, and F. Wang, Corros. Sci. 146, 202 (2019).10.1016/j.corsci.2018.10.036 ↗
8. R. Johnsen, T. Lange, G. Stenerud, and J.S. Olsen, Corros. Sci. 142, 45–55 (2018).10.1016/j.corsci.2018.06.031 ↗
9. X. Wu, J. Zha, and M.A.G. Koffas, Curr. Opin. Food Sci. 32, 9 (2020).10.1016/j.cofs.2019.12.007 ↗
10. G. Chunlei, L. Xuefeng, H. Haiyou, and X. Jianxin, Mat. Sci. Eng. A. 579, 202 (2013).10.1016/j.msea.2013.05.029 ↗
11. H. Wei, Y.-H. Wei, L.-F. Hou, and N. Dang, Corros. Sci. 111, 382 (2016).10.1016/j.corsci.2016.05.029 ↗
12. Y. Wang, Y. Niu, G. Wang, Y. Sun, and C. Liu, J. Alloys Compd. 778, 691 (2019).10.1016/j.jallcom.2018.11.182 ↗
13. X. Guoliang, W. Qiangsong, M. Xujun, X. Baiqing, and P. Lijun, Mat. Sci. Eng. A. 558, 326 (2012).10.1016/j.msea.2012.08.007 ↗
14. X. Lu, Y.-W. Liu, H.-T. Zhao, C. Pan, Z.-Y. Wang, and T. Nonferr, Metal. Soc. 31, 703 (2021).
15. Y. Fu, J. Li, H. Luo, C. Du, and X. Li, J. Mater. Sci. Technol. 80, 217 (2021).10.1016/j.jmst.2020.11.044 ↗
16. J. Liu, S. Yang, W. Xia, X. Jiang, and C. Gui, J. Alloys Compd. 654, 63 (2016).10.1016/j.jallcom.2015.09.130 ↗
17. L. Shao, G. Xie, X. Liu, Y. Wu, J. Yu, and Y. Wang, Corros. Sci. 163, 108253 (2020).10.1016/j.corsci.2019.108253 ↗
18. W.-B. Xie, Q.-S. Wang, X.-J. Mi, G.-L. Xie, D.-M. Liu, X.-C. Gao, Y. Li, and T. Nonferr, Metal. Soc. 25, 3247 (2015).
19. J. Ren, E. Guo, X. Wang, H. Kang, Z. Chen, and T. Wang, Materials (Basel) 12, 3686 (2019).10.3390/ma12223686 ↗
20. M.F. Wang, D.H. Xiao, B.R. Sun, and W.S. Liu, J. Alloys Compd. 776, 172 (2019).10.1016/j.jallcom.2018.10.290 ↗
21. C. Wang, Y. Gong, B.V. Cunning, S. Lee, Q. Le, S.R. Joshi, O. Buyukcakir, H. Zhang, W.K. Seong, M. Huang, M. Wang, J. Lee, G.H. Kim, and R.S. Ruoff, Sci Adv 7, 3767 (2021).10.1126/sciadv.abe3767 ↗
22. A. NACE, ASTM International (ASTMG31–12a (2012)).
23. Rashmi and P.K.C. Pillai, JMatS, 20, 2275–2279 (1985).10.1007/BF01112314 ↗
24. C.-H. Chang, T.-C. Huang, C.-W. Peng, T.-C. Yeh, H.-I. Lu, W.-I. Hung, C.-J. Weng, T.-I. Yang, and J.-M. Yeh, Carbon 50, 5044 (2012).10.1016/j.carbon.2012.06.043 ↗
25. F. Muktepavela, G. Bakradze, and V. Sursaeva, JMatS 43, 3848 (2008).
26. H. Jin, Z. Nie, L. Wang, D. Cong, C. Tan, H. Cai, and Y. Wang, Intermetallics 131, 107128 (2021).10.1016/j.intermet.2021.107128 ↗
27. M.-X. Wang, H. Zhu, G.-J. Yang, K. Liu, J.-F. Li, and L.-T. Kong, Mater. Design. 198, 109359 (2021).10.1016/j.matdes.2020.109359 ↗
28. K. Nagato, K. Shintani, T. Shimura, N. Shikazono, and M. Nakao, J. Electrochem. Soc. 166, F144–F148 (2019).10.1149/2.1071902jes ↗
29. T. Zhao, S. Wang, Z. Liu, C. Du, and X. Li, Corros. Sci. 179, 109176 (2021).10.1016/j.corsci.2020.109176 ↗
30. Z. Xiao, Z. Li, A. Zhu, Y. Zhao, J. Chen, and Y. Zhu, Corros. Sci. 76, 42 (2013).10.1016/j.corsci.2013.05.026 ↗
31. H. Nady, N.H. Helal, M.M. El-Rabiee, and W.A. Badawy, MCP 134, 945 (2012).
32. L. Núñez, E. Reguera, F. Corvo, E. González, and C. Vazquez, Corros. Sci. 47, 461 (2005).10.1016/j.corsci.2004.05.015 ↗
33. A. Drach, I. Tsukrov, J. DeCew, J. Aufrecht, A. Grohbauer, and U. Hofmann, Corros. Sci. 76, 453 (2013).10.1016/j.corsci.2013.07.019 ↗
34. ŽZ. Tasić, M.B.P. Mihajlović, M.B. Radovanović, A.T. Simonović, and M.M. Antonijević, JMoSt 1159, 46 (2018).
35. S. Chen, and D. Zhang, Corros. Sci. 136, 275 (2018).10.1016/j.corsci.2018.03.017 ↗
36. X. Zhang, S.O. Pehkonen, N. Kocherginsky, and G.A. Ellis, Corros. Sci. 44(11), 2507 (2002).10.1016/S0010-938X(02)00021-5 ↗
37. M. Wang, M. Song, G.S. Was, and J.L. Nelson, Corros. Sci. 160, 108168 (2019).10.1016/j.corsci.2019.108168 ↗
38. A.A. El-Moneim, A. Gebert, M. Uhlemann, O. Gutfleisch, and L. Schultz, Corros. Sci. 44, 1857 (2002).10.1016/S0010-938X(01)00163-9 ↗
39. M. Srinivas, S.K. Adapaka, and L. Neelakantan, J. Alloys Compd. 683, 647 (2016).10.1016/j.jallcom.2016.05.090 ↗
40. X. Wang, Z. Chen, E. Guo, X. Liu, H. Kang, and T. Wang, J. Alloys Compd. 863, 158762 (2021).10.1016/j.jallcom.2021.158762 ↗
41. L. Romero-Resendiz, J.M. Cabrera, S. Elizalde, V. Amigó-Borrás, I.A. Figueroa, and G. Gonzalez, J. Market. Res. 18, 1281 (2022).
42. W.B. Xie, Q.S. Wang, G.L. Xie, X.J. Mi, D.M. Liu, X.C. Gao, and Y. Li, MSF 850, 773 (2016).10.4028/www.scientific.net/MSF.850.773 ↗
43. N. Saikrishna, G.P.K. Reddy, B. Munirathinam, and B.R. Sunil, J. Magnes. Alloys 4(1), 68 (2016).10.1016/j.jma.2015.12.004 ↗
44. G.R. Argade, K. Kandasamy, S.K. Panigrahi, and R.S. Mishra, Corros. Sci. 58, 321 (2012).10.1016/j.corsci.2012.01.007 ↗
45. A. Balyanov, Scripta Mater. 51, 225 (2004).10.1016/j.scriptamat.2004.04.011 ↗
46. H. Miyamoto, K. Harada, T. Mimaki, A. Vinogradov, and S. Hashimoto, Corros. Sci. 50, 1215 (2008).10.1016/j.corsci.2008.01.024 ↗
47. M.T. Lee, H. Liu, and D. Brandell, Batteries Supercaps 3, 1370 (2020).10.1002/batt.202000145 ↗
48. Y. Zhang, Z. Xiao, Y. Zhao, Z. Li, Y. Xing, and K. Zhou, MCP 199, 54 (2017).
49. M.R. Nellist, F.A. Laskowski, F. Lin, T.J. Mills, and S.W. Boettcher, Acc. Chem. Res. 49, 733 (2016).10.1021/acs.accounts.6b00001 ↗
50. J. Zhang, B. Jiang, Q. Yang, D. Huang, A. Tang, F. Pan, and Q. Han, J. Alloys Compd. 849, 156619 (2020).10.1016/j.jallcom.2020.156619 ↗
51. K.D. Ralston, and N. Birbilis, Corrosion 66(7), 075005 (2010).10.5006/1.3462912 ↗
52. J. Kubasek, D. Vojtech, J. Lipov, and T. Ruml, Mater Sci Eng C Mater Biol Appl 33, 2421 (2013).10.1016/j.msec.2013.02.005 ↗