Simulation-Free Identification of the Reduced Hosford–Coulomb Ductile Fracture Criterion for Nimonic Sheets Assisted by the Virtual Fields Method
Source abstract
Abstract
An inverse method assisted by the finite element-based virtual fields (FE-VFM) is proposed to identify the ductile fracture criteria without finite element analyses. The proposed method was applied to obtain the reduced Hosford–Coulomb (HC) fracture criterion of Nimonic thin sheets. In the proposed method, the strain hardening of the Nimonic sheets was inversely measured by the FE-VFM using digital image correlation measurements in notched tensile tests. Then, damage fields were optimized to identify the material parameters of the HC model with the stress and strain fields calculated by the FE-VFM. Finally, the measured fracture criterion was converted into a fracture-forming limit diagram (FFLD) for validation. The predicted FFLD showed good agreement with the experimental results.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. S. Kim, J. Lee, F. Barlat, and M.-G. Lee, J. Mater. Process. Technol. 213, 1929 (2013).10.1016/j.jmatprotec.2013.05.015 ↗
2. H.J. Bong, F. Barlat, D.C. Ahn, H.-Y. Kim, and M.-G. Lee, Int. J. Mech. Sci. 75, 94 (2013).10.1016/j.ijmecsci.2013.05.017 ↗
3. J. Lee, H.J. Bong, D. Kim, Y.-S. Lee, Y. Choi, and M.-G. Lee, Met. Mater. Int. 26, 682 (2020).10.1007/s12540-019-00353-9 ↗
4. H.J. Bong, J. Lee, and M.-G. Lee, JOM 72, 2568 (2020).10.1007/s11837-020-04084-w ↗
5. H.J. Bong, D. Yoo, D. Kim, Y.-N. Kwon, and J. Lee, J. Manuf. Process. 58, 775 (2020).10.1016/j.jmapro.2020.08.053 ↗
6. P. Eyckens, A. Van Bael, and P. Van Houtte, Int. J. Plast. 27, 1577 (2011).10.1016/j.ijplas.2011.03.008 ↗
7. J. Li, J.E. Carsley, T.B. Stoughton, L.G. Hector, and S.J. Hu, Int. J. Plast. 45, 21 (2013).10.1016/j.ijplas.2012.10.004 ↗
8. M. Yoshida, F. Yoshida, H. Konishi, and K. Fukumoto, Int. J. Mech. Sci. 47, 1885 (2005).10.1016/j.ijmecsci.2005.07.006 ↗
9. J. He, Z. Cedric-Xia, D. Zeng, and S. Li, J. Eng. Mater. Technol. 135, 031009 (2013).10.1115/1.4023676 ↗
10. Y. Bao and T. Wierzbicki, Int. J. Mech. Sci. 46, 81 (2004).10.1016/j.ijmecsci.2004.02.006 ↗
11. Y. Bai and T. Wierzbicki, Int. J. Plast. 24, 1071 (2008).10.1016/j.ijplas.2007.09.004 ↗
12. N. Park, H. Huh, S.J. Lim, Y. Lou, Y.S. Kang, and M.H. Seo, Int. J. Plast. 96, 1 (2017).10.1016/j.ijplas.2016.04.014 ↗
13. S. Gatea, H. Ou, B. Lu, and G. McCartney, Eng. Fract. Mech. 186, 59 (2017).10.1016/j.engfracmech.2017.09.021 ↗
14. A. Needleman and V. Tvergaard, J. Mech. Phys. Solids 32, 461 (1984).10.1016/0022-5096(84)90031-0 ↗
15. J. Lee, H. Jong-Bong, H. Park, and D. Kim, Eng. Fract. Mech. 261, 108213 (2022).10.1016/j.engfracmech.2021.108213 ↗
16. H.J. Bong, D. Kim, Y.-N. Kwon, and J. Lee, Eur. J. Mech. A. Solids 87, 104227 (2021).10.1016/j.euromechsol.2021.104227 ↗
17. P.B. Woelke, Int. J. Plast. 125, 331 (2020).10.1016/j.ijplas.2019.10.004 ↗
18. W. Jeong, C. Kim, C.-A. Lee, H.J. Bong, S.-H. Hong, and M.-G. Lee, Int. J. Plast. 154, 103299 (2022).10.1016/j.ijplas.2022.103299 ↗
19. J. Lee, H.J. Bong, D. Kim, and J. Ha, J. Market. Res. 25, 1844 (2023).
20. Y. Bai and T. Wierzbicki, Int. J. Fract. 161, 1 (2010).10.1007/s10704-009-9422-8 ↗
21. D. Mohr and S.J. Marcadet, Int. J. Solids Struct. 67–68, 40 (2015).10.1016/j.ijsolstr.2015.02.024 ↗
22. Y. Lou, H. Huh, S. Lim, and K. Pack, Int. J. Solids Struct. 49, 3605 (2012).10.1016/j.ijsolstr.2012.02.016 ↗
23. C. Kim, K.M. Min, H. Choi, H.J. Kim, and M.-G. Lee, Int. J. Mech. Sci. 202–203, 106499 (2021).10.1016/j.ijmecsci.2021.106499 ↗
24. N. Karathanasopoulos, K.S. Pandya, and D. Mohr, J. Adv. Join. Process. 3, 100040 (2021).10.1016/j.jajp.2020.100040 ↗
25. S. Basak, C. Kim, W. Jeong, Y. Il Jung, and M.-G. Lee, Int. J. Mech. Sci. 219, 107109 (2022).10.1016/j.ijmecsci.2022.107109 ↗
26. S. Basak, C. Kim, Y. Il Jung, H.K. Jin, and M.G. Lee, Int. J. Mater. Form. 15, 4 (2022).10.1007/s12289-022-01654-y ↗
27. J. Ha, M. Baral, and Y.P. Korkolis, J. Mech. Phys. Solids 132, 103685 (2019).10.1016/j.jmps.2019.103685 ↗
28. M. Dunand and D. Mohr, Int. J. Solids Struct. 47, 1130 (2010).10.1016/j.ijsolstr.2009.12.011 ↗
29. M. Kõrgesaar and J. Romanoff, Mar. Struct. 38, 1 (2014).10.1016/j.marstruc.2014.05.001 ↗
30. Y. Lou and J.W. Yoon, Int. J. Plast. 101, 125 (2018).10.1016/j.ijplas.2017.10.012 ↗
31. M. Grédiac, F. Pierron, S. Avril, and E. Toussaint, Strain 42, 233 (2008).
32. F. Pierron and M. Grédiac, Strain 57, e12370 (2021).10.1111/str.12370 ↗
33. J.-H. Kim, F. Pierron, M.R. Wisnom, and K. Syed-Muhamad, Compos. Part A Appl. Sci. Manuf. 38, 2065 (2007).10.1016/j.compositesa.2007.04.006 ↗
34. M. Grédiac, E. Toussaint, and F. Pierron, Int. J. Solids Struct. 40, 2401 (2003).10.1016/S0020-7683(03)00030-1 ↗
35. C. Kim, J.-H. Kim, and M.-G. Lee, Compos. B Eng. 200, 108338 (2020).10.1016/j.compositesb.2020.108338 ↗
36. J.-H. Kim, A. Serpantié, F. Barlat, F. Pierron, and M.-G. Lee, Int. J. Solids Struct. 50, 3829 (2013).10.1016/j.ijsolstr.2013.07.018 ↗
37. M. Rossi, A. Lattanzi, F. Barlat, and J.-H. Kim, Int. J. Solids Struct. 242, 111532 (2022).10.1016/j.ijsolstr.2022.111532 ↗
38. J.M.P. Martins, A. Andrade-Campos, and S. Thuillier, Int. J. Solids Struct. 21, 172 (2019).
39. A. Marek, F.M. Davis, M. Rossi, and F. Pierron, Int.J. Mater. Form. 12, 457 (2019).10.1007/s12289-018-1428-1 ↗
40. A. Marek, F.M. Davis, J.-H. Kim, and F. Pierron, Exp. Mech. 60, 639 (2020).10.1007/s11340-019-00575-3 ↗
41. D. Leem, J.-H. Kim, F. Barlat, J.H. Song, and M.-G. Lee, Met. Mater. Int. 24, 351 (2018).10.1007/s12540-018-0024-8 ↗
42. C. Kim, D. Myung, D. Kim, and M.-G. Lee, Int. J. Mech. Sci. 245, 108097 (2023).10.1016/j.ijmecsci.2022.108097 ↗
43. C. Kim and M.-G. Lee, Int. J. Solids Struct. 233, 111204 (2021).10.1016/j.ijsolstr.2021.111204 ↗
44. J. Lee, H.J. Bong, and M.-G. Lee, Comput. Struct. 257, 106652 (2021).10.1016/j.compstruc.2021.106652 ↗
45. H. Choi, S. Choi, S.-C. Kang, and M.-G. Lee, Appl. Sci. 11, 5509 (2021).10.3390/app11125509 ↗
46. H. Choi and J.W. Yoon, Comput. Methods Appl. Mech. Eng. 345, 123 (2019).10.1016/j.cma.2018.10.031 ↗
47. F. Pierron and M. Grédiac, The Virtual Fields Method (Springer, New York, 2012).10.1007/978-1-4614-1824-5 ↗
48. H.J. Bong, J. Lee, M. Lee, and D. Kim, Int. J. Mech. Sci. 155, 461 (2019).10.1016/j.ijmecsci.2019.03.025 ↗
49. H.J. Bong and J. Lee, Int. J. Mech. Sci. 191, 106066 (2021).10.1016/j.ijmecsci.2020.106066 ↗
50. C.C. Roth and D. Mohr, Int. J. Mech. Sci. 149, 224 (2018).10.1016/j.ijmecsci.2018.10.007 ↗
51. ISO 12004-2 (2021), Metallic Materials—Determination of forming-limit curves for sheet and strip—part 2: determination of forming-limit curves in the laboratory, 2nd ed. (International Organization for Standardization, 2021).
52. Y. Choi, J. Lee, S.S. Panicker, H.-K. Jin, S.K. Panda, and M.-G. Lee, Int. J. Mech. Sci. 170, 105344 (2020).10.1016/j.ijmecsci.2019.105344 ↗
53. N. Park, H. Huh, and J.W. Yoon, Int. J. Solids Struct. 151, 181 (2018).10.1016/j.ijsolstr.2018.01.009 ↗