Enhancing electrochemical reversibility in lithium metal batteries through structural engineering of flexible composite current collectors
Source abstract
Abstract
Lithium metal batteries (LMBs) offer high energy densities but face challenges including poor reversibility and Li dendrite growth. Herein, we evaluate two flexible composite current collectors composed of reduced graphene oxide and carbon nanotubes (rGO/CNT) to investigate how Li storage mechanisms influence electrochemical performance. By modulating the number of layers in rGO, the few-layered rGO/CNT collector (FL-CC) stores Li through a pure plating mechanism, whereas the multi-layered rGO/CNT collector (ML-CC) stores lithium via a hybrid intercalation/plating mechanism. The hybrid mechanism in ML-CC promotes reversible Li-ion storage, reduces active Li-ion loss, and suppresses dendrite formation. As a result, ML-CC achieves superior cycling stability compared to FL-CC in both LMBs and anode-free LMB tests paired with LiFePO₄ cathodes at a practical areal capacity of 4.5 mAh cm⁻². This study highlights the importance of structural design in current collectors and demonstrates that incorporating lithiatable materials can significantly enhance the electrochemical stability of anode-free LMBs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Lu, J., Wu, T. & Amine, K. State-of-the-art characterization techniques for advanced lithium-ion batteries. Nat. Energy 2, 17011 (2017).10.1038/nenergy.2017.11 ↗
2. Jung, S.-K. et al. Lithium-free transition metal monoxides for positive electrodes in lithium-ion batteries. Nat. Energy 2, 16208 (2017).10.1038/nenergy.2016.208 ↗
3. Choi, J. W. & Aurbach, D. Promise and reality of post-lithium-ion batteries with high energy densities. Nat. Rev. Mater. 1, 16013 (2016).10.1038/natrevmats.2016.13 ↗
4. Lin, L. et al. Adjustable mixed conductive interphase for dendrite-free lithium metal batteries. ACS Nano 16, 13101–13110 (2022).10.1021/acsnano.2c05832 ↗
5. Tikekar, M. D., Choudhury, S., Tu, Z. & Archer, L. A. Design principles for electrolytes and interfaces for stable lithium-metal batteries. Nat. Energy 1, 16114 (2016).10.1038/nenergy.2016.114 ↗
6. Ding, P. et al. Polymer electrolytes and interfaces in solid-state lithium metal batteries. Mater. Today 51, 449–474 (2021).10.1016/j.mattod.2021.08.005 ↗
7. Lee, S. et al. Dendrite-suppressed Li deposition enabled by surface-tailored carbon-based current collectors for high-rate and stable Li-metal batteries. Carbon 221, 118941 (2024).10.1016/j.carbon.2024.118941 ↗
8. Yang, S. et al. Uniform Li deposition through the graphene-based ion-flux regulator for high-rate Li metal batteries. ACS Appl. Mater. Interfaces 16, 3416–3426 (2024).10.1021/acsami.3c15746 ↗
9. Liu, H. et al. A novel design of 3D carbon host for stable lithium metal anode. Carbon Energy 4, 654–664 (2022).10.1002/cey2.193 ↗
10. Wang, J., Wang, K. & Xu, Y. Emerging two-dimensional covalent and coordination polymers for stable lithium metal batteries: from liquid to solid. ACS Nano 15, 19026–19053 (2021).10.1021/acsnano.1c09194 ↗
11. Liu, J. et al. Pathways for practical high-energy long-cycling lithium metal batteries. Nat. Energy 4, 180–186 (2019).10.1038/s41560-019-0338-x ↗
12. Stolz, L., Homann, G., Winter, M. & Kasnatscheew, J. The Sand equation and its enormous practical relevance for solid-state lithium metal batteries. Mater. Today 44, 9–14 (2021).10.1016/j.mattod.2020.11.025 ↗
13. Wang, J. et al. Challenges and progresses of lithium-metal batteries. Chem. Eng. J. 420, 129739 (2021).10.1016/j.cej.2021.129739 ↗
14. Zhang, Y. et al. Reactivating the dead lithium by redox shuttle to promote the efficient utilization of lithium for anode free lithium metal batteries. Adv. Funct. Mater. 33, 2301332 (2023).10.1002/adfm.202301332 ↗
15. Chen, J. et al. Engineering high-performance Li metal batteries through dual-gradient porous Cu-CuZn Host. ACS Nano 18, 13662–13674 (2024).10.1021/acsnano.4c00720 ↗
16. Ha, S., Hyun, J. C., Kwak, J. H., Lim, H.-D. & Yun, Y. S. Hierarchically nanoporous 3D assembly composed of functionalized onion-like graphitic carbon nanospheres for anode-minimized Li metal batteries. Small 16, 2003918 (2020).10.1002/smll.202003918 ↗
17. Wu, Y. et al. Multifunctional lithium compensation agent based on carbon edges catalysis and its application in anode-free lithium batteries. Chem. Eng. J. 458, 141411 (2023).10.1016/j.cej.2023.141411 ↗
18. Lin, L. et al. Li-Rich Li2[Ni0.8Co0.1Mn0.1]O2 for anode-free lithium metal batteries. Angew. Chem. Int. Ed. 60, 8289–8296 (2021).10.1002/anie.202017063 ↗
19. Lohrberg, O. et al. Benchmarking and critical design considerations of zero-excess Li-metal batteries. Adv. Funct. Mater. 33, 2214891 (2023).10.1002/adfm.202214891 ↗
20. Pyo, S. et al. Lithiophilic wetting agent inducing interfacial fluorination for long-lifespan anode-free lithium metal batteries. Adv. Energy Mater. 13, 2203573 (2023).10.1002/aenm.202203573 ↗
21. Kim, J., Lee, G. R., Chung, R. B. K., Kim, P. J. & Choi, J. Homogeneous Li deposition guided by ultra-thin lithiophilic layer for highly stable anode-free batteries. Energy Storage Mater. 61, 102899 (2023).10.1016/j.ensm.2023.102899 ↗
22. Qian, L. et al. Advanced material engineering to tailor nucleation and growth towards uniform deposition for anode-less lithium metal batteries. Small 18, 2205233 (2022).10.1002/smll.202205233 ↗
23. Kim, S., Lee, M., Oh, S. & Ryu, W.-H. Li-Dendrite cage electrode with 3-D interconnected pores for Anode-Free Lithium-Metal batteries. Chem. Eng. J. 474, 145447 (2023).10.1016/j.cej.2023.145447 ↗
24. Wu, W. et al. Ultralight lithiophilic three-dimensional lithium host for stable high-energy-density anode-free lithium metal batteries. Energy Storage Mater. 63, 102974 (2023).10.1016/j.ensm.2023.102974 ↗
25. Schöner, S. et al. Chemical prelithiated 3D Lithiophilic/-Phobic interlayer enables long-term Li Plating/Stripping. ACS Nano 18, 17924–17938 (2024).10.1021/acsnano.4c04507 ↗
26. Kim, J., Choi, J. & Kim, P. J. A new approach to stabilize the electrochemical performance of Li metal batteries through the structure alteration of CNT scaffolds. Carbon 203, 426–435 (2023).10.1016/j.carbon.2022.11.101 ↗
27. Zhu, Y., Wu, S., Zhang, L., Zhang, B. & Liao, B. Lithiophilic Zn3N2-modified Cu current collectors by a novel FCVA technology for stable anode-free lithium metal batteries. ACS Appl. Mater. Interfaces 15, 43145–43158 (2023).10.1021/acsami.3c08109 ↗
28. Natarajan, K. et al. Tuning intrinsic lithiophilicity of copper foil to improve electrochemical performance of anode-free Li metal battery. J. Energy Storage 84, 110880 (2024).10.1016/j.est.2024.110880 ↗
29. Liu, W. et al. Lithiophilic Sn layer via pre-electroplating to realize the uniform stripping/plating for dendrite free Li metal anodes. Chem. Eng. J. 475, 146153 (2023).10.1016/j.cej.2023.146153 ↗
30. Zhang, S. et al. Ultrathin hierarchical porous Cu current collector fabricated by anodic oxidation in complexing agent system for stable anode-free Lithium metal batteries. Electrochim. Acta 442, 141895 (2023).10.1016/j.electacta.2023.141895 ↗
31. Shan, C. et al. Cu-CNTs current collector fabricated by deformation-driven metallurgy for anode-free Li metal batteries. Carbon 204, 367–376 (2023).10.1016/j.carbon.2022.12.074 ↗
32. Hu, Z. et al. Lithiophilic carbon nanofiber/graphene nanosheet composite scaffold prepared by a scalable and controllable biofabrication method for ultrastable dendrite-free lithium-metal anodes. Small 18, 2104735 (2022).10.1002/smll.202104735 ↗
33. Chang, J., Huang, Q., Gao, Y. & Zheng, Z. Pathways of developing high-energy-density flexible lithium batteries. Adv. Mater. 33, 2004419 (2021).10.1002/adma.202004419 ↗
34. Zhang, Y. -j et al. Integrated reduced graphene oxide multilayer/Li composite anode for rechargeable lithium metal batteries. RSC Adv. 6, 11657–11664 (2016).10.1039/C5RA25553H ↗
35. Krishnamoorthy, K., Veerapandian, M., Yun, K. & Kim, S. J. The chemical and structural analysis of graphene oxide with different degrees of oxidation. Carbon 53, 38–49 (2013).10.1016/j.carbon.2012.10.013 ↗
36. Brisebois, P. P. & Siaj, M. Harvesting graphene oxide – years 1859 to 2019: a review of its structure, synthesis, properties and exfoliation. J. Mater. Chem. C. 8, 1517–1547 (2020).10.1039/C9TC03251G ↗
37. Park, S. et al. Colloidal suspensions of highly reduced graphene oxide in a wide variety of organic solvents. Nano Lett. 9, 1593–1597 (2009).10.1021/nl803798y ↗
38. Muzyka, R., Drewniak, S., Pustelny, T., Chrubasik, M. & Gryglewicz, G. Characterization of graphite oxide and reduced graphene oxide obtained from different graphite precursors and oxidized by different methods using raman spectroscopy. Materials 11, 1050 (2018).10.3390/ma11071050 ↗
39. Hu, Y., Song, S. & Lopez-Valdivieso, A. Effects of oxidation on the defect of reduced graphene oxides in graphene preparation. J. Colloid Interface Sci. 450, 68–73 (2015).10.1016/j.jcis.2015.02.059 ↗
40. Kumar, M. & Ando, Y. Single-wall and multi-wall carbon nanotubes from camphor—a botanical hydrocarbon. Diam. Relat. Mater. 12, 1845–1850 (2003).10.1016/S0925-9635(03)00217-6 ↗
41. Liu, S. et al. An inorganic-rich solid electrolyte interphase for advanced lithium-metal batteries in carbonate electrolytes. Angew. Chem. Int. Ed. 60, 3661–3671 (2021).10.1002/anie.202012005 ↗
42. Yeddala, M., Rynearson, L. & Lucht, B. L. Modification of carbonate electrolytes for lithium metal electrodes. ACS Energy Lett. 8, 4782–4793 (2023).10.1021/acsenergylett.3c01709 ↗
43. Ren, Q. et al. Inorganic/organic composite fluorinated interphase layers for stabilizing ether-based electrolyte in high-voltage lithium metal batteries. J. Mater. Chem. A 12, 1072–1080 (2024).10.1039/D3TA05506J ↗
44. Wang, Q. et al. Ultrathin composite Li electrode for high-performance Li metal batteries: a review from synthetic chemistry. Adv. Funct. Mater. 33, 2213648 (2023).10.1002/adfm.202213648 ↗
45. Yan, X. et al. Multifunctional roles of carbon-based hosts for Li-metal anodes: a review. Carbon Energy 3, 303–329 (2021).10.1002/cey2.95 ↗
46. Duan, J. et al. Is graphite lithiophobic or lithiophilic?. Natl Sci. Rev. 7, 1208–1217 (2020).10.1093/nsr/nwz222 ↗
47. Ma, X. et al. Exfoliated multi-layered graphene anode with the broadened delithiation voltage plateau below 0.5 V. J. Energy Chem. 49, 233–242 (2020).10.1016/j.jechem.2020.02.044 ↗
48. Chen, J. et al. Electrolyte design for Li metal-free Li batteries. Mater. Today 39, 118–126 (2020).10.1016/j.mattod.2020.04.004 ↗
49. Zhang, H., Yang, Y., Ren, D., Wang, L. & He, X. Graphite as anode materials: fundamental mechanism, recent progress and advances. Energy Storage Mater. 36, 147–170 (2021).10.1016/j.ensm.2020.12.027 ↗
50. Cheng, F. et al. A 3D multifunctional host anode from commercial carbon cloth for lithium metal batteries. J. Mater. Chem. A 11, 4205–4219 (2023).10.1039/D2TA09182H ↗
51. Lin, D. et al. Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes. Nat. Nanotechnol. 11, 626–632 (2016).10.1038/nnano.2016.32 ↗
52. Bieker, G., Winter, M. & Bieker, P. Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode. Phys. Chem. Chem. Phys. 17, 8670–8679 (2015).10.1039/C4CP05865H ↗
53. Lee, W., Suzuki, S. & Miyayama, M. Lithium storage properties of graphene sheets derived from graphite oxides with different oxidation degree. Ceram. Int. 39, S753–S756 (2013).10.1016/j.ceramint.2012.12.030 ↗
54. Kim, T.-H. et al. Enlarging the d-spacing of graphite and polarizing its surface charge for driving lithium ions fast. J. Mater. Chem. A 2, 7600–7605 (2014).10.1039/C3TA15360F ↗
55. Persson, K. et al. Lithium diffusion in graphitic carbon. J. Phys. Chem. Lett. 1, 1176–1180 (2010).10.1021/jz100188d ↗
56. Baba, T., Sodeyama, K., Kawamura, Y. & Tateyama, Y. Li-ion transport at the interface between a graphite anode and Li2CO3 solid electrolyte interphase: ab initio molecular dynamics study. Phys. Chem. Chem. Phys. 22, 10764–10774 (2020).10.1039/C9CP06608J ↗
57. Çakmakçı, N. et al. Lithium-embedded carbon nanotube/graphite composite anode for lithium metal battery. J. Energy Storage 89, 111618 (2024).10.1016/j.est.2024.111618 ↗
58. Zhang, X. et al. Regulating Li uniform deposition by lithiophilic interlayer as Li-ion redistributor for highly stable lithium metal batteries. Chem. Eng. J. 436, 134945 (2022).10.1016/j.cej.2022.134945 ↗
59. Nikodimos, Y. et al. Multifunctional electrospun PVDF-HFP gel polymer electrolyte membrane suppresses dendrite growth in anode-free li metal battery. Energy Storage Mater. 61, 102861 (2023).10.1016/j.ensm.2023.102861 ↗
60. Kim, J. H., Lee, S., Lee, J. W., Song, T. & Paik, U. 3D-interconnected nanoporous RGO-CNT structure for supercapacitors application. Electrochim. Acta 125, 536–542 (2014).10.1016/j.electacta.2014.01.142 ↗
61. Pei, S., Zhao, J., Du, J., Ren, W. & Cheng, H.-M. Direct reduction of graphene oxide films into highly conductive and flexible graphene films by hydrohalic acids. Carbon 48, 4466–4474 (2010).10.1016/j.carbon.2010.08.006 ↗
62. Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169–11186 (1996).10.1103/PhysRevB.54.11169 ↗
63. Blöchl, P. E. Projector augmented-wave method. Phys. Rev. B 50, 17953–17979 (1994).10.1103/PhysRevB.50.17953 ↗
64. Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).10.1103/PhysRevLett.77.3865 ↗