Laser sintering of Cu particle-free inks for high-performance printed electronics
Source abstract
Abstract
Abstract This study investigates laser sintering of Cu particle-free ink (Cu formate tetrahydrate—amino-2-propanol complex) as an alternative to conventional sintering in an oven (under inert/reducing atmosphere). Utilizing benefits of high-speed localized heating using laser, substrate damage can be prevented for low-melting substrates such as Polyethylene Terephthalate (PET). Firstly, a suitable sintering process window is achieved based on energy density for two different flexible polymeric susbtrates: Polyimide and PET using different laser parameters (laser power, scan rate and spot diameter). Subsequently, characterization of laser sintered traces are also made using different laser optic profiles (Gaussian and top hat). Different methodologies for fabrication of metallized Cu layer were also demonstrated. A very low bulk resistivity of 3.24 µΩcm (1.87 times of bulk Cu) was achieved on trace thickness of 0.85 ± 0.15 µm exhibiting good adherence to polymeric substrates. A promising fabrication process of low-cost and reliable flexible printed electronic devices is demonstrated.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Additive Manufacturing and 3D Printing Technologies · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Khan, Y. et al. A new frontier of printed electronics: flexible hybrid electronics. Adv. Mater. 32, 1905279 (2020).10.1002/adma.201905279 ↗
2. Cruz, S. M. F., Rocha, L. A. & Viana, J. C. Printing technologies on flexible substrates for printed electronics. In Flexible Electronics (IntechOpen, 2018).10.5772/intechopen.76161 ↗
3. Martins, P. et al. Advances in printing and electronics: from engagement to commitment. Adv. Funct. Mater. 33, 2213744 (2023).10.1002/adfm.202213744 ↗
4. Gao, M., Li, L. & Song, Y. Inkjet printing wearable electronic devices. J. Mater. Chem. C 5, 2971–2993 (2017).10.1039/C7TC00038C ↗
5. Gao, W., Ota, H., Kiriya, D., Takei, K. & Javey, A. Flexible electronics toward wearable sensing. Acc. Chem. Res. 52, 523–533 (2019).10.1021/acs.accounts.8b00500 ↗
6. Ramakrishnan, R., Saran, N. & Petcavich, R. J. Selective inkjet printing of conductors for displays and flexible printed electronics. J. Disp. Technol. 7, 344–347 (2011).10.1109/JDT.2010.2096650 ↗
7. Khan, S., Lorenzelli, L. & Dahiya, R. S. Technologies for printing sensors and electronics over large flexible substrates: a review. IEEE Sens. J. 15, 3164–3185 (2014).10.1109/JSEN.2014.2375203 ↗
8. Yang, W. et al. Design, fabrication and applications of flexible RFID antennas based on printed electronic materials and technologies. J. Mater. Chem. C. 11, 406–425 (2023).10.1039/D2TC03736J ↗
9. Sampaio, P. G. V. et al. Overview of printing and coating techniques in the production of organic photovoltaic cells. Int. J. Energy Res. 44, 9912–9931 (2020).10.1002/er.5664 ↗
10. Ma, L. Y. & Soin, N. Recent progress in printed physical sensing electronics for wearable health-monitoring devices: a review. IEEE Sens. J. 22, 3844–3859 (2022).10.1109/JSEN.2022.3142328 ↗
11. Huang, Q. & Zhu, Y. Printing conductive nanomaterials for flexible and stretchable electronics: a review of materials, processes, and applications. Adv. Mater. Technol. 4, 1800546 (2019).10.1002/admt.201800546 ↗
12. Beedasy, V. & Smith, P. J. Printed electronics as prepared by inkjet printing. Materials 13, 704 (2020).10.3390/ma13030704 ↗
13. Mo, L. et al. Silver nanoparticles based ink with moderate sintering in flexible and printed electronics. Int. J. Mol. Sci. 20, 2124 (2019).10.3390/ijms20092124 ↗
14. Shen, W., Zhang, X., Huang, Q., Xu, Q. & Song, W. Preparation of solid silver nanoparticles for inkjet printed flexible electronics with high conductivity. Nanoscale 6, 1622–1628 (2014).10.1039/C3NR05479A ↗
15. Chantal, P. et al. Versatile molecular silver ink platform for printed flexible electronics. ACS Appl Mater Interfaces 9, 17226–17237 (2017).10.1021/acsami.7b02573 ↗
16. Cui, W. et al. Gold nanoparticle ink suitable for electric-conductive pattern fabrication using in ink-jet printing technology. Colloids Surf. A Physicochem. Eng. Asp. 358, 35–41 (2010).10.1016/j.colsurfa.2010.01.023 ↗
17. Mekhmouken, S. et al. Gold nanoparticle-based eco-friendly ink for electrode patterning on flexible substrates. Electrochem. Commun. 123, 106918 (2021).10.1016/j.elecom.2021.106918 ↗
18. Li, W. et al. The rise of conductive copper inks: challenges and perspectives. Appl. Mater. Today 18, 100451 (2020).10.1016/j.apmt.2019.100451 ↗
19. Tomotoshi, D. & Kawasaki, H. Surface and interface designs in copper-based conductive inks for printed/flexible electronics. Nanomaterials 10, 1689 (2020).10.3390/nano10091689 ↗
20. Li, W., Chen, M., Wei, J., Li, W. & You, C. Synthesis and characterization of air-stable Cu nanoparticles for conductive pattern drawing directly on paper substrates. J. Nanopart. Res. 15, 1–10 (2013).10.1007/s11051-013-1949-y ↗
21. Li, W., Li, W., Wei, J., Tan, J. & Chen, M. Preparation of conductive Cu patterns by directly writing using nano-Cu ink. Mater. Chem. Phys. 146, 82–87 (2014).10.1016/j.matchemphys.2014.02.045 ↗
22. Dai, X., Xu, W., Zhang, T. & Wang, T. Self-reducible Cu nanoparticles for conductive inks. Ind. Eng. Chem. Res. 57, 2508–2516 (2018).10.1021/acs.iecr.7b04248 ↗
23. Dai, X., Zhang, T., Shi, H., Zhang, Y. & Wang, T. Reactive sintering of Cu nanoparticles at ambient conditions for printed electronics. ACS Omega 5, 13416–13423 (2020).10.1021/acsomega.0c01678 ↗
24. Jeong, S. et al. Air-stable, surface-oxide free Cu nanoparticles for highly conductive Cu ink and their application to printed graphene transistors. J. Mater. Chem. C 1, 2704–2710 (2013).10.1039/c3tc00904a ↗
25. Yang, W., List-Kratochvil, E. J. & Wang, C. Metal particle-free inks for printed flexible electronics. J. Mater. Chem. C. 7, 15098–15117 (2019).10.1039/C9TC05463D ↗
26. Shin, J. et al. Sensitive wearable temperature sensor with seamless monolithic integration. Adv. Mater. 32, 1905527 (2020).10.1002/adma.201905527 ↗
27. Nam, V. B., Giang, T. T. & Lee, D. Laser digital patterning of finely-structured flexible copper electrodes using copper oxide nanoparticle ink produced by a scalable synthesis method. Appl. Surf. Sci. 570, 151179 (2021).10.1016/j.apsusc.2021.151179 ↗
28. Kwon, J. et al. Flexible and transparent Cu electronics by low‐temperature acid‐assisted laser processing of Cu nanoparticles. Adv. Mater. Technol. 2, 1600222 (2017).10.1002/admt.201600222 ↗
29. Jung, J. et al. Moiré-free imperceptible and flexible random metal grid electrodes with large figure-of-merit by photonic sintering control of copper nanoparticles. ACS Appl. Mater. Interfaces 11, 15773–15780 (2019).10.1021/acsami.9b01893 ↗
30. Yabuki, A., Arriffin, N. & Yanase, M. Low-temperature synthesis of copper conductive film by thermal decomposition of copper–amine complexes. Thin Solid Films 519, 6530–6533 (2011).10.1016/j.tsf.2011.04.112 ↗
31. Shin, D. H. et al. A self-reducible and alcohol-soluble copper-based metal–organic decomposition ink for printed electronics. ACS Appl. Mater. Interfaces 6, 3312–3319 (2014).10.1021/am4036306 ↗
32. Farraj, Y., Grouchko, M. & Magdassi, S. Self-reduction of a copper complex MOD ink for inkjet printing conductive patterns on plastics. Chem. Commun. 51, 1587–1590 (2015).10.1039/C4CC08749F ↗
33. Kang, S., Tasaka, K., Lee, J. H. & Yabuki, A. Self-reducible copper complex inks with two amines for copper conductive films via calcination below 100° C. Chem. Phys. Lett. 763, 138248 (2021).10.1016/j.cplett.2020.138248 ↗
34. Shabanov, N. S. et al. Water-soluble copper ink for the inkjet fabrication of flexible electronic components. Materials 14, 2218 (2021).10.3390/ma14092218 ↗
35. Marchal, W. et al. Effectiveness of ligand denticity-dependent oxidation protection in copper MOD inks. Langmuir 35, 16101–16110 (2019).10.1021/acs.langmuir.9b02281 ↗
36. Paquet, C. et al. The role of amine ligands in governing film morphology and electrical properties of copper films derived from copper formate-based molecular inks. Nanoscale 10, 6911–6921 (2018).10.1039/C7NR08891D ↗
37. Nabi, S. et al. Key aspects of the processes of thermal decomposition of complex compounds of copper formate for low-temperature printed electronics. II. The solvent effect. ACS Appl. Electron. Mater. 5, 4635–4642 (2023).10.1021/acsaelm.3c00774 ↗
38. Yabuki, A. & Tanaka, S. Electrically conductive copper film prepared at low temperature by thermal decomposition of copper amine complexes with various amines. Mater. Res. Bull. 47, 4107–4111 (2012).10.1016/j.materresbull.2012.08.052 ↗
39. Choi, Y. H. & Hong, S. H. Effect of the Amine concentration on phase evolution and densification in printed films using Cu (II) complex ink. Langmuir 31, 8101–8110 (2015).10.1021/acs.langmuir.5b01207 ↗
40. Xu, W. & Wang, T. Synergetic effect of blended alkylamines for copper complex ink to form conductive copper films. Langmuir 33, 82–90 (2017).10.1021/acs.langmuir.6b03668 ↗
41. Yang, W., Guo, Z., Zhao, X., Zhang, X. & List-Kratochvil, E. J. Insight into the types of alkanolamines on the properties of copper (II) formate-based conductive ink. Langmuir 40, 7095–7105 (2024).10.1021/acs.langmuir.4c00221 ↗
42. Mohan, N. et al. Decomposition mechanism and morphological evolution of in situ realized Cu nanoparticles in Cu complex inks. N. J. Chem. 48, 6796–6808 (2024).10.1039/D3NJ05185D ↗
43. Zenou, M., Ermak, O., Saar, A. & Kotler, Z. Laser sintering of copper nanoparticles. J. Phys. D Appl. Phys. 47, 025501 (2013).10.1088/0022-3727/47/2/025501 ↗
44. Halonen, E., Heinonen, E. & Mäntysalo, M. The effect of laser sintering process parameters on Cu nanoparticle ink in room conditions. Opt. Photonics J. 3, 40–44 (2013).10.4236/opj.2013.34A007 ↗
45. Araki, T. et al. Cu salt ink formulation for printed electronics using photonic sintering. Langmuir 29, 11192–11197 (2013).10.1021/la402026r ↗
46. Norita, S. et al. Inkjet-printed copper electrodes using photonic sintering and their application to organic thin-film transistors. Org. Electron. 25, 131–134 (2015).10.1016/j.orgel.2015.06.026 ↗
47. Joo, M., Lee, B., Jeong, S. & Lee, M. Laser sintering of Cu paste film printed on polyimide substrate. Appl. Surf. Sci. 258, 521–524 (2011).10.1016/j.apsusc.2011.08.076 ↗
48. Yu, J. H., Jung, H. S., Jeong, J. K. & Kang, K. T. Sintering behavior of copper nanoparticle ink by laser in air. J. Nanosci. Nanotechnol. 19, 1261–1268 (2019).10.1166/jnn.2019.16233 ↗
49. Soltani, A., Vahed, B. K., Mardoukhi, A. & Mäntysalo, M. Laser sintering of copper nanoparticles on top of silicon substrates. Nanotechnology 27, 035203 (2015).10.1088/0957-4484/27/3/035203 ↗
50. Chen, X., Zhang, M., Zhu, J., Tao, Z. & Qiu, L. Laser sintering of Cu nanoparticles deposited on ceramic substrates: experiments and modeling. Addit. Manuf. 69, 103527 (2023).
51. Roy, N. K. et al. A comprehensive study of the sintering of copper nanoparticles using femtosecond, nanosecond, and continuous wave lasers. J. Micro Nano Manuf. 6, 010903 (2018).10.1115/1.4038455 ↗
52. Niittynen, J. & Mäntysalo, M. Characterization of laser sintering of copper nanoparticle ink by FEM and experimental testing. IEEE Trans. Compon. Packaging Manuf. Technol. 4, 2018–2025 (2014).10.1109/TCPMT.2014.2363032 ↗
53. Hernandez-Castaneda, J. C., Lok, B. K. & Zheng, H. Laser sintering of Cu nanoparticles on PET polymer substrate for printed electronics at different wavelengths and process conditions. Front. Mech. Eng. 15, 303–318 (2020).10.1007/s11465-019-0562-x ↗
54. Lee, J., Lee, B., Jeong, S., Kim, Y. & Lee, M. Microstructure and electrical property of laser-sintered Cu complex ink. Appl. Surf. Sci. 307, 42–45 (2014).10.1016/j.apsusc.2014.03.127 ↗
55. Lee, J., Lee, B., Jeong, S., Kim, Y. & Lee, M. Enhanced surface coverage and conductivity of Cu complex ink-coated films by laser sintering. Thin Solid Films 564, 264–268 (2014).10.1016/j.tsf.2014.06.005 ↗
56. Yu, J. H., Rho, Y., Kang, H., Jung, H. S. & Kang, K. T. Electrical behavior of laser-sintered Cu based metal-organic decomposition ink in air environment and application as current collectors in supercapacitor. Int. J. Precis. Eng. Manuf. Green. Technol. 2, 333–337 (2015).10.1007/s40684-015-0040-9 ↗
57. Min, H., Lee, B., Jeong, S. & Lee, M. Fabrication of 10 µm-scale conductive Cu patterns by selective laser sintering of Cu complex ink. Opt. Laser Technol. 88, 128–133 (2017).10.1016/j.optlastec.2016.09.021 ↗
58. Mohan, N., Ahuir-Torres, J. I., Bhogaraju, S. K., Kotadia, H., & Elger, G. Rapid Sintering of Inkjet Printed Cu Complex Inks Using Laser in Air. In Proc. 24th European Microelectronics and Packaging Conference & Exhibition (EMPC) 1–7 (IEEE, 2023).10.23919/EMPC55870.2023.10418323 ↗
59. Park, J. H. et al. Direct laser interference ink printing using copper metal–organic decomposition ink for nanofabrication. Nanomaterials 12, 387 (2022).10.3390/nano12030387 ↗
60. Dong, Y. et al. A low temperature and air-sinterable copper–diamine complex-based metal organic decomposition ink for printed electronics. J. Mater. Chem. C. 6, 6406–6415 (2018).10.1039/C8TC01849A ↗
61. Mohan, N., Saccon, R., Bhogaraju, S. K., & Elger, G. Cu complex inks for printed electronics application-challenges and solutions. In Mikro-Nano-Integration; 9. GMM-Workshop 1–5 (VDE, 2022).
62. Beal, V. E., Paggi, R. A., Salmoria, G. V. & Lago, A. Statistical evaluation of laser energy density effect on mechanical properties of polyamide parts manufactured by selective laser sintering. J. Appl. Polym. Sci. 113, 2910–2919 (2009).10.1002/app.30329 ↗
63. Torrisi, L. Advanced polymer targets for TNSA regime producing 6 MeV protons at 1016 W/cm2 laser intensity. Phys. Plasmas. 24, 023111 (2017).10.1063/1.4976134 ↗
64. Ana, P., Bortoleto, J., Cruz, N., Rangel, E. & Durrant, S. Surface properties of PET polymer treated by plasma immersion techniques for food packaging. Int. J. Nano Res 1, 33–41 (2018).
65. Ibrahim, N., Riduwan, M. & Rusli, A. Synthesis of siloxane-polyimide copolymer with low birefringence and low loss for optical waveguide. J. Phys. Sci. 30, 103–113 (2019).10.21315/jps2019.30.s2.9 ↗
66. Du, Q., Chen, T., Liu, J. & Zeng, X. Surface microstructure and chemistry of polyimide by single pulse ablation of picosecond laser. Appl. Surf. Sci. 434, 588–595 (2018).10.1016/j.apsusc.2017.10.200 ↗
67. Kurabayashi, K., Asheghi, M., Touzelbaev, M. & Goodson, K. E. Measurement of the thermal conductivity anisotropy in polyimide films. J. Microelectromechanical Syst. 8, 180–191 (1999).10.1109/84.767114 ↗
68. Lopes, C. M. & Felisberti, M. I. Thermal conductivity of PET/(LDPE/AI) composites determined by MDSC. Polym. Test. 23, 637–643 (2004).10.1016/j.polymertesting.2004.01.013 ↗
69. Bîrcă, A., Gherasim, O., Grumezescu, V., & Grumezescu, A. M. Introduction in thermoplastic and thermosetting polymers. In Materials for Biomedical Engineering 1–28 (Elsevier, 2019).10.1016/B978-0-12-816874-5.00001-3 ↗
70. Rung, S., Rexhepi, M., Bischoff, C. & Hellmann, R. Laserscribing of thin films using top-hat laser beam profiles. J. Laser Micro Nanoeng. 8, 309 (2013).10.2961/jlmn.2013.03.0021 ↗
71. Le, H. et al. Effects of top-hat laser beam processing and scanning strategies in laser micro-structuring. Micromachines 11, 221 (2020).10.3390/mi11020221 ↗
72. ASTM International. ASTM D3359-23: Standard test methods for rating adhesion by tape test. ASTM International. https://doi.org/10.1520/D3359-23 (2023).10.1520/D3359-23 ↗
73. Apostolakis, A. et al. Resistivity study of inkjet-printed structures and electrical interfacing on flexible substrates. Micro Nano Eng. 15, 100129 (2022).10.1016/j.mne.2022.100129 ↗